Tender For Day To Day To Building And Sanitary And Plumbing Maintenance Work Of Main Hospital Building
Tender Value
4.84 Lakhs
Estimated cost
Bid Submission
25 Sep 2024
0 days left
EMD
9698
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ranaghat → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Day To Day To Building And Sanitary And Plumbing Maintenance Work Of Main Hospital Building
BOQ
| Sl. No. | Item Description |
| 1 | Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared) |
| 2 | Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately).(b) Medium size plant of girth of exposed stem above 75 mmbut not exceeding 150 mm. lift upto 6 mtr. |
| 3 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor. |
| 4 | (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)(A)[Pakur Variety]In ground floor (a) 1:3:6 proportion |
| 5 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (in all floors for internal wall & up to 6 m height of external wall)(i) 3 mm. thick (weighing 7.4 kg./sq.m.) |
| 6 | Renewing worn out putty of glass panes :(a) Panes not exceeding 0.2 Sq.m |
| 7 | Extra for fixing glass panes in steel window. |
| 8 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish and stacking anywhere within the compound as directed. |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor).[Excluding cost of chipping over concrete surface](i) With 6:1 cement mortar(b) 20 mm thick plaster |
| 10 | (i) With 6:1 cement mortar(c) 15 mm thick plaster |
| 11 | (ii) With 1:4 cement mortar(c) 10 mm thick plaster |
| 12 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc.NOTE : Cement 0.152 cu.m. per 100 sq.m. |
| 13 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floorsto match with the existing work & 4 nos. key stones (10 mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhessive & grout materials etc.(A) Floor With Sand Cement Mortar (1:4)20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(b) Area of each tile above 0.09 Sqm (ii) Other than Coloured decorative including white |
| 14 | (B) Wall With Sand Cement Mortar (1:3)15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(b) Area of each tile above 0.09 Sq.m(ii) Other than Coloured decorative including white |
| 15 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately)(a) Upto area 2.5 Sq.m |
| 16 | (b) Above area 2.5 Sq.m |
| 17 | Wood work in door and window frame fitted and fixed complete including a protective coat of painting at the contact surface of the frame excludung the cost of concrete, Iron Butt Hinges and M.S. clamps.(e) Sal : Malayasian |
| 18 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hige and other fittings.(iii) 35mm thick shutters with 19mm thick panel of size 30to 45 Cm.(b) Sisu, Gamar, Champ, Badam, Bhola, Mopgra, Hallack. |
| 19 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(c) 40mm X 6mm, 125mm Length |
| 20 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vi) 100 mm x 50 mm x 1.25 mm |
| 21 | i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.(b) Medium (I.S.I. size 2) |
| 22 | (ii) Door stopper (Anodised aluminium) |
| 23 | Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge. |
| 24 | b) Supplying \"Godrej\" mortice lock chromium plated with keys 6 levers includingfitting & fixing complete. |
| 25 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.(iii) 300mm x 16mm dia. bolt. |
| 26 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(vii) 225 mm long x 10mm dia. bolt. |
| 27 | Anodised aluminium grip handle with base plate of approved quality fitted and fixed complete.(ii) 225mm grip x 16mm dia rod x 38mm plate x 3.2mm thick. |
| 28 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor)(i)Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 29 | PVC Door Shutter-30 mm thick:Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm)wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular \"L\" shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materialstaxes and all other incidental charges complete. |
| 30 | Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. |
| 31 | White washing including cleaning and smoothening surface thoroughly.All Floors(b) Two coats (to be done on specific instruction). |
| 32 | Supplying, fitting and fixing bib cock or stop cock.(a) (ii) Chromium plated Bib Cock long body with wall flange with aerator(Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) |
| 33 | (d) (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand). |
| 34 | (f)/(i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent) |
| 35 | Supplying, fitting and fixing pillar cock of approved make.b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent). |
| 36 | Removing chokage in G.I. pipe including cleaning pipe.(i) 15 mm |
| 37 | (iii) 25 mm |
| 38 | (iv) 32 mm |
| 39 | (vi) 50 mm |
| 40 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iii) 900 mm long |
| 41 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 42 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.(a) With \"P\" trap (with vent) |
| 43 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(b) Anglo Indian(ii) Plastic (hallow type) white |
| 44 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(iii) 600 mm long |
| 45 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length(b) 110 mm |
| 46 | (B) Fittings (ii) Plain Tee(b) 110 mm |
| 47 | (B) Fittings x) Bend 87.5º(b) 110 mm |
| 48 | (B) Fittings xv) Vent Cowl(b) 110 mm |
| 49 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materialsetc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and .............................. complete as per direction of the Engineer-in-charge. (B)Under ground(ii) 110 mm dia. |
| 50 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed WorkPVC Pipes (Dia)15 mm |
| 51 | PVC Pipes (Dia)25 mm |
| 52 | PVC Pipes (Dia)32 mm |
| 53 | PVC Pipes (Dia)50 mm |
| 54 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately.)(A) For Exposed Work(a) (ii) 15 mm dia. medium quality |
| 55 | (f) (ii) 50 mm dia. medium quality |
| 56 | Supplying, fitting and fixing shower of approved brand and make.(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with WallHook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). |
| 57 | Cleaning soak pit by removing the top slab and replacing inner filling with jhama bats and repairing the pit as necessary including fitting the slab. |
| 58 | ADD : GST - 18% (SGST= 9% & CGST = 9%) |
| 59 | ADD : WEST BENGAL LABOUR WELFARE CESS = 1% |
AI Tender Summary
Tender Timeline
Sep 19, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 27, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender