Tender For Supply, Delivery And Installation Of New 20 Hp Submersible Pump Motor Set And Allied Electro-Mechanical Installation For Water Supply From Replaced Well At Biswalakhitala Under Kanaipur Faws Scheme.; 1 Pump, Motor and allied work:- 2 S & D and Installations at site/store of Submersible pumping machineries Set directly coupled with 3 ph 400 V (+-10%), 50 Hz AC, RPM-2900wet winding type Submersible Motor having Cr. Steel impeller and SS Shaft, Capacity 100-50 m3/hr., Head range 40-60 m,(nominal head 50 m) P-20 HP and delivery size-100-125 mm. as per direction of EIC 3 Supply & delivery of 5” (125 mm.) I.D. and OD 140 +- 0.20 mm, 10.2 mm. avr. wallThickness, 10’(avr. 3.0 mt) long standard (16kg/cm2) PVC column pipes with both end taperedand threaded portion length must be 4 with one end to be fitted with heavy gauge 10 to 13 mm. Thick , 8” long threaded pvc. socket ,all are completed as per direction of Eic. 4 Supply & delivery of Sub. Copper cable of 3 core 6 sq mm 1100 V grade. Mk-Finolex. 5 Supply & Delivery of 125 mm dia / 150 mm dia (5/6) standard duty PVC/CI Adoptor.Mk-Ashirbad/C.R.I./Raksha. 6 Supply,fitting & fixing MS top clamp 12 x 80 mm section for Sub P/M Set in two halves. 7 Supply,fitting & fixing of safety clamp for the P/M Set 6 mm x 40 mm section. 8 Supply,fitting & fixing of protecting device comprising of wire rope clamps etc. 9 Supply of pump-motor protective device cage type (galv. iron )comprising of wire rope clamps etc as per direction of EIC. 10 Supply,fitting & fixing Split type M.S fabricated suitable tube well cover for the tube well non-sign with necessary damping arrangement including holes for column pipe, air pipe & cable entry. 11 Supply & delivery C.I sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gun metal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed completed. size-125/150 mm. Mk-IVC/Sree Durga/Fluid Tech/Sigma flow. 12 Supply & delivery CI doble flange type NRV face to face IS 5312 hinge pin SS 410 driling IS 1538 pressure rating PN 1.0 Mk-IVC/Sree Durga/Fluid Tech/Sigma flow. 13 Supply & delivery of all types of CI specials viz bend, tee, tapper, tail piece, collers, bell mouth, with puddle collar etc as per specification. CI plain end IS 5531. 14 (a) Double end flange 150 mm dia 90 bend 15 (b) All end flanged 150 mm x 150mmx 150mmC.I Tee -Piece 16 Supply,fitting & fixing of CI double flanged pipe fitting1 no 150 mm. 17 Installation of pumping machinery with valves, pipe & pipe specials short piece, depth gauge, pressure gauge including hoisting of column pipe, making all electrical and water line inter-connection complete as per direction including Supply of necessary materials as reqd. for the work( Including Transportation Cost). 18 Flange joint to CI/DI/MS pipes and specials incl Supply of rubber gasket, nuts,bolts,washers etc of quality to make the joint water tight as reqd hydraulic pressure and direction of EIC. 19 Supply,fitting & fixing of pressure gauge of range 0-200 sq in with cock.Make: H guru/Equivalent 20 Construction of supporting pillar supporting platform for the resting of valves for easy operation with neat cement finish as per direction of EIC. 21 Supply &painting best quality weather thermal resistance paint appv quality two coats with necessary smoothening of surface and application primer incl material, labour and hire charge of tools & plants etc all complete. 22 Supply, Delivery & Installation of 415 V, 3 Phase, 50 hz Auto-manual 20 KW Star-Delta starter Control Panel for Sub. P/M Set. (as per enclosed details) Make- Sellwin/Electromech/ AC. Power/Equivalent as per direction of EIC. 23 Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415 V TPN with fuse on L & N Make-Havells/ Flora/Equivalent 24 Supply& delivery of fabricated MS Kiosk made from 16 SWG MS Angle (18,16,8) incl. Providing Al busbar of 60 A rating for main Supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC. 25 Supply, Delivery at site 1.1 KV grade Al rmoured cable of size 3.1/2 core 35 sq mm confirming to 1554/7098(PT) 1988 Mk-Havel or equivalent. 26 Laying of two cables upto 35 sq mm in underground trench in single tire formation (horizontal) the trench size 680 mmx 760 mm average depth, with brick protection on the top of the each cable with 8 (eight) nos per mtr and 4(four) nos bricks per mtr as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. 27 Laying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2x10 SWG GI (hot dip) wire making holes etc. as necessary mending good damages and painting. 28 Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC cable for 3 1/2 core upto 35 sq mm. 29 Finishing end of XLPE/PVC armoured cables by crimping method incl. Supplying fixing solderless socket(dowels make), tapes, anti corrosive paste & jointing materials 35 sq mm 3.1/2 core. 30 Inside & out side illumination 31 Supply and delivery of 1200 mm sweep, 1 phase, 60/70 watt, 5 star and having 300 mm down rod, 1.1mm thick alluminium bled, conforming IS 374, 2mm shank thickness ceilling fan of following make. 32 Supply and delivery of 230V,50Hz,heavy duty metal9fan exhaust 33 S, D of 45 W SmartBright essential lighiting luminare with PDC housing and street light optics to ensure uniform distribution. Type- BRP031 LED45 CW MR PSU GR DX, Make-Phillips . 34 Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting. 35 Supply & delivery at site of Decorative ultra slim linear LED tube lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack,18 Watt/ 20Watt , single phase. Make:- Havells or Equivalent. 36 Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc. 37 Supplying and fixing Sheet steel Main Switches onflat iron frame on wall. 240V DP with fuse on L&N. Make: Havells. 38 Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] Avg run-8 mtr 39 Supply,fitting & fixing at site of TW single board size 14 x 16. 40 Supply, delivery at site and storage of glowing plastic sign board for identification mark as per direction of EIC. 41 Erection of glowing plastic sign board for identification mark as per direction of EIC. 42 Safty installations:- 43 Supply,and fixing of HT insulation rubber Mat of following sizes:-Ii)2.0 mm thick (upto 11 KV). 44 Supply Delivery and installation of ABC Powder type fire extinguishers (stored pressure) HSN code-84241000 conforming to IS:15683 and complete in all respect as per direction of EIC , C)04 Kg with ISI marked Mono Ammonium Phosphate base Each 3157.00 ABC power conforming to IS:14609 and pressurized with nitrogen gas. Suitable for operating between (-)30ºC to (+)55ºC. Fire rating -1A & 13B 45 Supply and fixing of EI danger board on door/wall/fencing 46 Excavation of soil for installation of Earth Electrode and filling & ramming.(a)For Soft Soil. 47 Earthing (For Equipment earthing) with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1x4 SWG GI(Hot Dip) wire (4Mts .long),13 mm dia x 80 mm long G bolts, double nuts, double washers incl. S&F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts below the.ground level as below: By ISI-Medium GI pipe. 48 Earthing (For Lighting arrestor)with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt,double nuts, double washers including finishing both ends by making holes etc. and Supply,fitting & fixing 65 mm dia GI pipe (ISI-Medium)protection (3 Mts. long) to be filled with bitumen partly underthe ground level and partly above ground level to an averagedepth of 3.65 Mts. 49 Supply & fixing, fitting of lightning arrestor/conductor of G.I stick of size 1x5 Mtr long x 25 mm dia with G.I flange at bottom of size 75 x 75 x 5 mm thk.with copper discharge points including grouting by cement morter 1:4 as per direction of EIC. 50 Supplying & fixing earth bus bar of galvanized (Hot Dip) MS flat 50 mm x 6mm on wall having clearanc of 6mm from wall including providing drilled hole on the busbar complete with GI bolts,nuts,washers,spacing insulators etc.as required. 51 Connecting the equipments body to earth busbar including Supply,fitting & fixing 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. 52 Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe.
