Tender For Remaining Construction Work Of 2 Mo And 2 Pms Residential quarters At Chc Keshorai Patan, Distt. Bundi, 1 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All Kind of soil 2 Filling in plinth with locally available river shingle under floors including watering ramming consolidating and dressing complete including cost of shingle sand. 3 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 4 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 5 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 6 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 7 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering and reinforcement including curing, compaction, finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints and Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-20 grade reinforced cement concrete. All wiork up to plinth level. 8 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering and reinforcement including curing, compaction finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints and admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of engineer-in-charge. M-20 grade reinforced cement concrete. All work from plinth level up to floor Three Level.Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.M20 grade Nominal Mix 9 Centering & Shuttering with plywood or steel sheets including strutting, propping, bracing bothways and removal of formwork for foundations in basements rafts, footings, strap beams bases of columns, etc. upto plinth level. 10 Centering & shuttering with plywood or steel sheets including strutting, propping, bracing bothways with wooden members and removal of formwork for superstructure upto 4.5 m height above plinth, for : 11 Columns, pillars, posts and struts etc. 12 Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 cm thick wall in : Cement Mortar 1 : 6 (1-Cement : 6-Sand). 13 Supplying and fixing dressed sand or other approved stone shelves, tands in cement mortar 1 : 3 with fine dressed edges : 35 mm thick. 14 Supplying and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1 : 3 with machine cut edges :Kota stone 25 to 30 mm thick. 15 Marble stone flooring table rubbed,18-20 mm thick over 20 mm (Av.) thick base of CM 1 : 4 (1 cement : 4 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Gree Marble 16 Extra for providing edge moulding to 18 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 17 Marble work 18 Kota stone work 19 Providing and fixing 1st quality standard White / Ivory Glazed Tiles ISI marked [IS : 13753] of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar). Catgory-I : Kajaria, Johnson, , Somani make etc. 20 Providing and fixing 1st quality MAT finished ceremic tile size 300 x 300 mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile of Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of the complete (including the cost of cement mortor bed1:4).Category -A : Kajaria, Jhonson, Somani make 21 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A : 30 mm thickcommercial Veneer Both side 22 Add extra in Flush doors : For Double leaf 23 Add extra in Flush doors : For External teak wood lipping on flush door 24 35mmx6mm 25 30mmx6mm 26 Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. 27 Providing and fixing Square bars or other flat welded to window, ventilators etc. 28 Providing batta (gola) 75 mm x 75 mm in cement concrete (1 : 2 : 4) including finishing with cement mortar 1 : 3 as per standard design. 29 Providing & laying Chequered terrazzo tiles of approved make 22mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed wit pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28mm thick bed of C.M. 1:4 : 30 Add extra fornon-slipping 9-12mm ironite topping tiles. 31 Polished Blue Kota stone flooring skirting, laid over 20 mm thick base of C.M. 1 : 4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : 32 For area of each slab upto 900 Sq.Cm : 25 mm thick slab. 33 For area of each slab from 2001 to 5000 Sq.Cm : 25 mm thick slab. 34 Polished Blue Kota Stone slab in steps, walls, pillars having fine machine cut edges laid on 12 mm (Av.) thick cement mortar 1 : 3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete : 30 mm thick slab area 2001 to 5000 Sq.Cm. 35 Random rubble dry stone Kharanja under floor. 36 Plaster on new surface on walls in cement sand mortar 1 : 6 including racking of joint etc. complete fine finished : 37 20 mm thick 38 25 mm thick outer 39 Making grooves as per design in plaster 10 mm to 20 mm wide. 40 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including Prepration of base and all scaffolding :New work (two or more coats) over and including scrapping and priming coat with cement primer. 41 Distempering with Ist quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturers specification. Two or more coats on new work including prepartion of base with primer , lippy etc complete in all respect. 42 Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect.New work (Three or more coats). 43 Applying priming coat : With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. 44 Painting with Synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. 45 Grading roof water proofing treatment with :Cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 46 Carrage of MaterialEarth, Sand, Lime, Morrum, Manuru of sludge for 5 km 47 Providing and fixing precast cement concrete coping 1 : 2 : 4 mix 50 mm thick complete as perspecification : --- 50 mm --- 48 Add Extra for using steel props and bracings etc. instead of wooden members over item no. 4.11.2 to 4.11.3 above 10m and upto 30m 49 for item no. 4.11.2 50 for item no. 4.11.3 51 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead upto 50 Mtr. and lift upto 1.5 Mtr. 52 Providing and fixing Indian Type white glazed vitreous china 1st quality W.C. Orissa pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm 53 Providing and fixing European type white glazed vitreous china 1st quality W.C. pan (IS : 2556 Mark) P or S Trap including cutting and making good the wall and floor. 54 Providing and fixing Water Closet Seat Covers with brass hinges complete.Solid PVC ISI Marked Grade -1 White for EWC 55 Providing and fixing Low Level Flushing Cistern of 10 litres capacity (IS : 2556 Mark) of approved make with complete fittings, C.I. brackets duly painted, brass ball cock with ball, (IS : 1703 Mark) complete including cutting and making good the wall.PVC with PVC bend as per IS : 7231 56 Providing and fixing C.P. Brass Flush Valve with C.P. flush bend of approved make. Concealed type for 225 mm 57 P & F WVC Wash Basin (1st quality IS : 2556 mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P.Pillar cock (IS : 8934 mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550 mmx 400 mm 58 P & F Kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe upto floor level complete including cutting & making good the wall & floor.1.0 mm thick Salem stainless steel AISI - 304 Kitchen sink of approved make (Nirali, Neel- Kanth, Jaina, Faber, Criystal ) With large waste couplings 24 x 18 x 8 20 x 16 x 8 59 P & F Looking Mirror with PVC Frame of approved (Atul/ Equivalent)Size 500 x 400 mm 60 Providing and fixing Towel Rail or Ring of approved quality / make.C.P. Brass Towel rail with brackets 600 x 20 mm 61 Providing & Fixing Shop dish & Tray of approved/MakeCP brass 62 Providing and fixing Shower arm 15 mm dia of approved quality / make. C.P. Brass heavy & superior quality 150 mm Projection 63 Providing and fixing Extension Pipe for bib cocks of approved quality / make. C.P. Brass of heavy & superior quality 50 x 15 mm 64 Providing and fixing Jet Spray for water closet with C.P. Copper Tube flange of approved make 65 Providing & Fixing C.P. Flange for 15 mm dia taps 66 P & F bib cock (IS: 8931 mark) superior quality of approved makeC.P. Brass bib cock, 15 mm nominal bore 67 Providing and fixing Sink Cocks of superior quality of approved made.C.P.Sink Cock, swinging spout 15 mm 68 Providing and fixing Ball Cock (IS : 1703 Mark) with Rod & P.V.C. Ball complete.Brass wt. 400 gm 15 mm 69 Providing and fixing Inlet Connection (Angle, Valves) Superior quality, of approved make.for wash basin Gyser etc. C.P. Inlet connection 15 mm.Brass (IS: 8931 marked) 70 Providing and fixing 15 mm dia Connection Pipe of approved quality / make.PVC pipe with C.P. brass nuts upto length 600 mm 71 Providing and fixing Full -way Valve (IS : 778 Mark) or wheel valve of approved make. 72 Gun Metal 15 mm nominal bore 73 Gun Metal 25 mm nominal bore 74 Providing and Laying C.C. 1 : 5 :10 (stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete as per Rajasthan PWD specifications : (Width W = Dia of pipe in Cm + 40 Cm.) concrete width to be reduced from width W at centre of pipe to 0 at top of pipe.(Excluding Cost of pipe )100 mm diaS.W. Pipe 75 Providing and fixing rigid PVC Pipe (IS : 4985 mark) Class II (4 Kg./Cm2) approved quality / makeincluding jointing the pipe with solvent cement rubber ring and lubricant.110 mm dia 76 Providing and fixing rigid PVC Pipe fittings (IS : 4985 mark) of approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant.110 mm dia 77 Coupler (Socket) 78 Bend 45° 79 Bend 87.5 80 Pipe Clip 81 Construction of Manhole in all types of soil inner size 90 x 60 CM. with 450 mm thick masonry in CM 1 : 6, 10 cm. thick cement concrete 1 : 5 : 10 in foundation, 20 mm thick inside plaster in CM 1 : 6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring, making channels, 80 mm. thick stone and covering with 40 mm thick M-15 grade C.C. flooring, 25 Kg. CI cover with frame of 450 mm dia earthwork etc. complete including disposal of surplus earth within 50 Mtr. lead as per design. Depth upto .5 M 82 Construction of Chamber in all types of soil with 300 mm thick masnory in CM. 1 : 6, 100 mm thick C.C. 1 : 5 : 10 in foundation , 20 mm thick inside plaster in Cm 1 : 6, finished with floating neat cement 50 mm thick M-15 grade C.C. flooring earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 Mtr. Inside size 450 x 450 mm depth upto 0.5 M 83 Construction of Soakage well in all types of soil 300mm thick dry stone masonry, top and bottom 300 mm course in CM 1 : 6, 80 mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring earthwork complete as per approved drawing including disposal of earth within a lead of 50 Mtr. Size 240 cm dia outside & 240 cm depth 84 Providing and fixing PVC Storage tank confirming to IS : (12701 marked indicating the BIS license No) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. Long wash out pipe with plug & socket, including making connection etc. complete of approved design.500 Litres capacity 85 Hoisting Charges for each floor. 86 Construction of Septic Tank in all types of soil with 40 Cm. thick masonry in CM 1 : 6, 15 Cm. thickC.C. bed of 1 : 5 : 10, M-15 grade C.C. flooring & over stone slab covering, 80 mm thick slab, jointing of slab in CM 1 : 3 Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1: 6 finished with neat floating cement, 4 Nos C.I. foot rests of approved design, two No. 450 mm dia 25Kg. of each C.I. cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 MtrSize 200 x 100 x 130 cm (for 10 users) 87 Providing and fixing Polypropylene random copolymer Pipe made from PPR Type 3 Raw Material certified by bodycote with UV stabilized external layer in similar colour & approved by WR AS for it & potablity & including clamp, cutting and making good the walls & floors. (Internal Work) PN-16 20 mm OD 88 Providing and fixing Polypropylene random copolymer Pipe made from PPR Type 3 Raw Material certified by bodycote with UV stabilized external layer in similar colour & approved by WR AS for it & potablity & including clamp, cutting and making good the walls & floors. (Internal Work) PN-16 32 mm OD 89 Providing and fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland wastedischarge system (IS : 13592 : 1992 Marked) of approved quality / make 110 mm dia 90 Providing and fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings Type B for sciland waste discharge system (IS : 13592 : 1992 Marked) of approved quality / make. - 110 mm dia 91 Coupler 92 Single tee 93 Single tee with door 94 Bend 45° 95 Bend 87.5° 96 Door Bend (87.5°) 97 Vent Cowel 100mm 98 Construction of Cement Concrete Chamber 125 mm dia on depressed floor upto 45 cm. height from floor with. Stainless steel sheet grating 99 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 Mtr. All kinds of soil 100 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 101 Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 cm thick wall in : 102 Earth work in excavation over areas (exceeding 30 cm in depth, 1.5 Mtr. in width as well as 10 Sqm on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5 Mtr. disposed earth to be leveled and neatly dressed : All kinds of soil 103 Carrage of MaterialEarth, Sand, Lime, Morrum, Manuru of sludge for Lead up to 5 KM 104 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead upto 50 Mtr. and lift upto 1.5 Mtr. 105 Interlocking Paver Blocks having 80 mm thickness in M-40 grade concrete Providing and Laying 80 mm thick cement concrete blocks of M-40 Grade (Manufactured with fully mechanised dry cast process with forced action mixer whose arms revolve along the main axis and rotate about its own axis also, having humidity sensor for moisture control of w/c ratio in concrete mix. Manufactured with steel moulds(Milled and manufactured in CSI diamond or CSI Nitro process for accuracy) on steel base plate of min 16 mm thick;Having Vibration and pressing action both together withthe help of mutiplesynchronised vibrators.Power of hydraulic station should be minimum 50KW for compaction and cured in controlled chambers having humidity control and automated air circulation system) spreading 25mm thick sand underneath and filling joints with sand on existing W.B.M.base, as per IS15658:2006 and all materials shall conform to MoRTH Specification Clause 602. 106 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
