Tender For Sitc Of Addressable Access Control System For Ngn 9Th Floor, Telephone Bhavan, Saifabad.
Tender Value
2.99 Lakhs
Estimated cost
Bid Submission
08 Oct 2024
0 days left
EMD
5988
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
saifabad → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
SITC of Addressable Access Control System for NGN 9th floor, Telephone Bhavan, Saifabad.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Sep-2024 | Extension of last date for online submission | Date | 08-Oct-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | MAIN ACCESS CONTROL PANEL: Supplying installation testing and commissioning of following Microprocessor based Access controllers for connecting the item such as card readers, Magnetic locks etc. with TCP/ IP Compatibility with suitable size MS powder coated enclosure, power supply units along with PSU, battery charger and minimum 4 hrs. Battery back-up, on-board additional Inputs/Auxiliary outputs and all accessories along with Tamper Protected casing as per the detailed technical specification attached. The Access controllers should be UL listed. The access controller is to be integrated with the analog addressable fire alarm system for operation.(a) 4 Card reader controller (Four door controller) |
| 2 | (b) 2 Card reader controller (Two door controller) |
| 3 | SMART CARD READERS: Supplying installation testing and commissioning of Smart Card readers with stainless steel base plate with base box i/c door interface module (if applicable), power supply unit etc. The read range shall be up to 125 mm for Doors. The reader log data should be transfer to server on real time basis. |
| 4 | Biometric Finger Print Reader: Supplying installation testing and commissioning of Biometric finger reader having inbuilt smartcard readers with pin pad complete with enclosure, protective cover to avoid scratching and all accessories i/c door interface module (if applicable) , power supply unit etc. as per the detailed technical specification attached for Doors at Server room. The reader log data should be transfer to server on real time basis.The reader should be capable of both enrolment purpose and access control purpose. |
| 5 | Face Recognition: SITC of face, fingerprint, ID card and password based time attendance Biometric terminal with 2.8\" HVGA display, capacity of 1000x face and 10000x fingerprints recognition, database capacity of 200000 storage capacity, identification mode 1:N, 1:1, built-in battery, operating temperature 0 deg to 60deg C, power supply12V DC |
| 6 | SMART CARDS: Supplying installation testing and commissioning of Smart Cards, double side card holder and lanyard including printing on lanyard |
| 7 | EM-LOCK FOR DOORS: Supplying installation testing and commissioning of Electromagnetic Locks of 600 lbs holding force suitable for operating with 12/24V DC along with power supply and battery backup for 4 hours and Green /Red LED for indication UL listed as per the specification(a) For single leaf doors |
| 8 | (b) For double leaf doors |
| 9 | Supplying installation testing and commissioning of Exit Switch at the inside of Doors. |
| 10 | Supplying installation testing and commissioning of master switch for opening all access control doors in case of Emergency. |
| 11 | MAGNETIC CONTACT:Supplying installation testing and commissioning of Surface/ flush mounted type Magnetic Contact suitable for 5 million cycle operation etc as required. |
| 12 | Access & Security Management Software: Supply & License for Access Control Readers/Doors and Access Control Systemshould be seamlessly Integrated and should have GUI system along with one client license to be installed at operator station. |
| 13 | Supplying and laying of the following size copper flexible cables for connecting reader/lock to controller including interconnections, testing etc., as reqd.(a) 2 core 0.5sqmm |
| 14 | (b) 4 core 0.5sqmm |
| 15 | (c) 8 core 0.5sqmm |
AI Tender Summary
Tender Timeline
Sep 24, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 08, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 08, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 09, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender