Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.PaintingCSR Item no.30.95] |
| 2 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) ( CSR item 14.115 a ) |
| 3 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.[CSR Item no.30.94] |
| 4 | Cement concrete 1:4:8With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type [CSR item No.-10.10 (ii) ]50.20x4.30x0.10 |
| 5 | Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type (CSR item No. 10.13 ii |
| 6 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2 Mtr. Depth including dressing of bottom and sides of trenches stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm layer with compaction including disposal of all surplus soil as directed with in lead of 30 Mtr.,*(CSR item No 6.6) |
| 7 | Providing and fixing 1st quality ceramic glazed wall tilesMatt/ SemiMatt/Glossy/HighlyGlossfinish/Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x600 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR 14.129) |
| 8 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).Size 1000x1000 mm(CSR Item 14.113 c) + Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS:15477, in average 3 mm thickness.( CSR item 14.1117) + Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includingfilling / grouting and finishing complete as perdirection of Engineer-in-charge (CSR item 14.120 C ) |
| 9 | Mandana stone tile flooring 15mm to 20 mm thick over 12.5mm thick base of cement mortar 1:3 (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match theshade of stone including rubbing and polishing (csr 14.134) |
| 10 | Scraping White wash and colour wash (CSR item No. 8.31 a) |
| 11 | Scraping cement plaster(CSR item No. 8.31 c) |
| 12 | 12.5 mm thick cement plaster 1:4(CSR item No. 15.9) |
| 13 | Preparation of plastered surfaces for, distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete(CSR item No. 16.6) |
| 14 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acrylic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface Complete as per specifications (CSR Item No.16.73) |
| 15 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) (CSR item no. 16.63) |
| 16 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm Unit(CSRitem No.16.59) A&C-I |
| 17 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade( CSR item No. 16.17) |
| 18 | Scraping brushing to remove paint to base metal / woodensurface ( CSR 16.36 ) |
| 19 | Roof treatment with water proofing material Dr. Fixit New coat/Roof seal Ultra . |
| 20 | Cement pointing 1:2 flush on flat brick flooring ( CSR item No 15.67) |
| 21 | Cement pointing 1:3 deep variety ( CSR 15.60) front of subordinate building front side |
| 22 | Precast Cement Concrete Kerb Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications(CSRitem No.24.41 (a) ) |
| 23 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position. [ CSR-item No.18.4] |
| 24 | Painting two or more coats with aluminium paint to give an even shade excluding priming coat (CSR Item No. 16.25) |
| 25 | Providing and fixing fiber glass sheet . |
| 26 | Providing and fixing chain link fencing wire (GI 50x50x4mm) |
| 27 | Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed [ CSR-item No.18.11 a ] |
| 28 | Renewing glass panes with wooden fillets wherever necessary Frosted glass Panes weighing 8.44Kg/sqm [CSR-item No.31.6 C] |
| 29 | Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge.6mm thick ACP Sheet[ CSR-item No.17.97 i ] |
| 30 | Teak wood chowkatsincluding iron hold fasts, corner straps, iron hinges, cleats, stops, wooden knobs or handles fixed in position.[ CSR-item No.17.21 A]Single Rebate (60mm x 100mm) |
| 31 | Teak wood chowkatsincluding iron hold fasts, corner straps, iron hinges, cleats, stops, wooden knobs or handles fixed in position [ CSR-item No.17.21 B] Double Rebate (60mm x 150mm) |
| 32 | Teak wood wire gauge shutters without spring (Single Leaf) [ CSR-item No.17.19 a ]35mm thick (Single Leaf) |
| 33 | Teak wood doors shutter and windows panelled glazed or panelled including Iron hinger, screws etc. complete fixed in position (excluding cost of tower bolts and handles but including labour for fittings the same)[ CSR-item No.17.18 a ]35mm thick (Single Leaf) |
| 34 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm (CSR 17.22 iii) |
| 35 | Cost of aluminium fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for thesefittings (Excluding sliding bolt)For shutter area up to 0.50 sqm (CSR 17.23 i) |
| 36 | Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).(CSR 17.22 iv ) |
| 37 | Teak wood 40mm planking tongued and grooved flooring including fixing with screw complete (CSR item No. 14.93) |
| 38 | Melamine polish two or more coats to give required finish including one coat of wood filler(CSR 16.66) |
| 39 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge (CSR item No 8.44) |
| 40 | Providing and fixing mineral fibre false ceiling tiles at all heights With 16 mm thick bevelled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. (CSR item No. 13.64) |
| 41 | First class burnt brick work laid in cement sandmortar 1:5 in foundation and plinth.[CSR Item No. 11.5] |
| 42 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..[CSR Item No. 14.88] |
| 43 | Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect[CSR Item No. 18.39] |
| 44 | Providing & fixing 16 gauge stainless steel pipe gate of grade 304 duly fixed at site with the help of M.S pivot & hinges grouted in cement concrete complete in all respect as per any kind of drawing & design[CSR Item No. 18.47] |
| 45 | Providing and fixing 8 mm thick frameless toughened glass door / window shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge . |
| 46 | Providing cement pots at site of work, filling 2/3rd volume with mixture of good earth and screened manure and cocopeat in the ratio 2:1:1 (CSR item No. 32.38) (a) 30 cm size of pots |
| 47 | Providing cement pots at site of work, filling 2/3rd volume with mixture of good earth and screened manure and cocopeat in the ratio 2:1:1 (CSR item No. 32.38) (c) 45 cm size of pots |
| 48 | Providing cement pots at site of work, filling 2/3rd volume with mixture of good earth and screened manure and cocopeat in the ratio 2:1:1 (CSR item No. 32.38) (e) 60 cm size of pots |
| 49 | Providing plastic pot with base plate at site of work, filling with mixture of good earth and screened manure and cocopeat in the ratio 2:1:1. ( CSR 32.39) (a) 30 cm size of pots |
| 50 | Providing plastic pot with base plate at site of work, filling with mixture of good earth and screened manure and cocopeat in the ratio 2:1:1. ( CSR 32.39) (c) 45 cm size of pots |
| 51 | Supplying Dahlia/Chrysanthemum plants in earthen pots at site of work, as specified by Engineer-in-chargePlanting and supplying Dahlia/Chrysanthemum plants in flowering stage in 25 cm size of pots (Csr 32.41 c) |
| 52 | Planting seasonal flower in beds Planting seasonal at flowering stage in beds including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting at 20cm distance from plant to plant and row to row. (CSR 32.22 b) |
| 53 | Overhead sign board 9000x1500mm simply supported type double sided as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 40x40x6mm angle iron supported on designed double support system of MS pipe and plates in the form of a simply supported type truss made with 350NB pipe @50kgper mtr as vertical support, 50NB pipe @ 4.50kg per mtr and 40NB pipe @ 3.61kg per mtr for truss including base plates, gusset plates, designed RCC foundation for fixing in ground complete as per clause 802 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 (CSR 24.53 b) |
| 54 | Advance Direction sign board 1200x900mm rectangular per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. grade sheeting fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.60x0.60x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 495609 and as per IRC 67 2012(CSR 24.48 b i ) |
| 55 | Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012(CSR 24.48 a i ) |
| 56 | Cautionary sign board 600x600x600mm triangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. fixed over 3mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloyrivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mmmm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 (CSR 24.44 b i ) |
| 57 | Road Delineator/Vertical Guide Post Delineator Providing and fixing of Standard Metal Delineator as per IRC 79:2019 consisting of retro reflective area in white color using full cube corner microprismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification. The delineator shall be painted with only black color powder coat of minimum 40 microns thickness, on top of which retro reflective sheeting only in white colour shall be pasted on both sides. The structure shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed. The delineator shall have grooves across the length to make the reflective sheets vandal-proof. The delineator is meant for application on gaps in median, traffic islands, dangerous bends, roundabouts, narrow bridges etc. or as desired by site engineer.(CSR 24.66) |
| 58 | Solar RPM/ Stud Providing and installation of solar cateye produced from an engineered polymer selected for superior impact resistance and weather-ability. The top of the solar stud should be transparent for solar charging and light output in active mode. The base of the body shall be yellow or neutral white as approved by Engineer In-charge. The marker shall incorporate a solar panel (comprising of solar cells) for converting solar energy into electricity, a storage device for storing the energy,LEDs for illumination and a design for providing 360 degree smooth illumination. The Solar stud shall be round in shape for providing illumination in all directions. The solar stud shall also have high reflective lenses for conspicuity in passive mode and dual shanks for improved road presence. The solar studs are intended for application directly onto pavement surfaces and shall be applied with epoxy resin adhesives designed for use with raised pavement markers and as supplied by the marker manufacturer separately. The solar cateye shall be of height: 65 ± 2 mm & Maximum Diameter: 136 ± 4 mm. The body of the solar cateye shall be resistant to dust and water ingress as per IP 65 standards. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. (CSR No 24.65 ) |
| 59 | Hazard Marker sign board 300x900mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflectiveSheeting as per ASTM D 4956 09 and IRC 67 2012, fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground including foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012(CSR 24.51 b) |
| 60 | Providing and fixing Rolling Blinds for window fixing required door fittings,all complete as per direction of Engineer-in-chargearea has been taken as per field measurement |
| 61 | Dismantling brick work tile, masonry or tile In cement[CSR Item no.8.5b ] |
| 62 | Dismantling concrete Reinforced cement concrete .[CSR Item no.8.6 e ] |
| 63 | Cement concrete 1:4:8With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type [CSR item No.-10.11 (b) ]50.20x4.30x0.10 |
| 64 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth(CSR 11.7) |
| 65 | First class burnt brick work laid in cement sand mortar 1:4 in first storey up to 4 metres above plinth level |
| 66 | Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded (CSR 10.26) |
| 67 | 12.5 mm thick cement plaster 1:3 ( CSR 15.8) |
| 68 | 10mm thick Cement Plaster 1:3 ( CSR 15.6 ) |
| 69 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade Using Concrete MixerM20 ( CSR 21.32 e i) |
| 70 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc ( CSR 9.8 ) |
| 71 | Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 415 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete ( CSR 18.17 ) |
| 72 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing ( CSR 13.13 i ) |
| 73 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonry complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separately as per respective item) ( CSR 13.74 ) |
| 74 | Providing and laying vitrified floor tiles of different sizes in light colour shades made usingm Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).Size 1000x1000 mm(CSR 14.113 c) |
| 75 | Renewing glass panes with wooden fillets wherever necessary Frosted glass Panes weighing 8.44Kg/sqm [ CSR-item No.31.6 C] |
| 76 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. III (size of door 851mm to 1000mm)( CSR 17.43 c) |
| 77 | Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 ( CSR 13.51) |
| 78 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 ( CSR 13.45) |
| 79 | Providing and Fixing Modulor kitchen all plywood, Mica make century Luxury innotech fitting brand Haffle complete 3-D Hinges with glass chimney . |
| 80 | Unforeseen items |
| 81 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.110 mm o/d CSR 29.43(a) (Item for 01 no. New bathroom , drawing room and kitchen) |
| 82 | Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 15mm i/d CSR 28.36 a. (Item for 01 no. New bathroom , drawing room and kitchen) |
| 83 | Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 20mm i/d CSR 28.36 b.(Item for 01 no. New bathroom , drawing room and kitchen) |
| 84 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. CSR 30.85 (a)(Item for 01 no. New bathroom , drawing room and kitchen) |
| 85 | Providing and fixing in position C.P brass extension piece 25mm long to 50 mm long of approved make (To the Approval of Engineer-in- charge) with various fixtures complete in all respect ( CSR 30.64 B)(i) (item for 01 no. New & 03 existing bathroom) |
| 86 | Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P brass 15mm concealed stop cock with adjustable wall flange.[CSR item No. 30.69 A (iv) )] (item for 01 no. New & 03 existing bathroom) |
| 87 | Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P brass 15mm angular stop cock with wall flange[CSR item No. 30.69 A (iii) )](item for 01 no. New & 03 existing bathroom) |
| 88 | Providing and fixing divertors of approved make (to the approval of Engineer-in-charge ) for bath and shower system complete in all respect. Single lever concealed diverter of bath and shower system (with body and upper part) CSR 30.70 (a )(item for 01 no. chairperson bathroom) |
| 89 | Providing & fixing in position 15 mm i/d C.P brass wall mixer of approved make (to the approval of Engineer-in-charge ) complete in all respect. CP brass wall mixer with telephonic shower. CSR Item no.30.46(a)(item for 02 existing bathroom) |
| 90 | Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. CP bras fitting C.P. brass overhead shower Φ180mm round shape single flow with shower arm with 20mm i/d Inlet and 300mm long round shape with 900 bend with flange.[CSR item No. 30.69 A (x) )] (item for 03 existing bathroom) |
| 91 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. Size 550 mm x 400 mm x 815 mm CSR item no 30.32 (ii)(Item for 01 no. New bathroom, 03 existing bathroom & 01 no. Drawing hall) |
| 92 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in- charge) for wash hand basin complete in all respect( CSR item no. 30.43(i)Vitreous chinaware standard white pedestal for wash hand basin (item for 01 no. New bathroom, 03 existing bathroom & 01 no. Drawing hall) |
| 93 | Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) instead of C.P. brass pillar tap complete in all respect. CSR item no. 30.38 (item for 03 existing bathroom) |
| 94 | Providing and fixing in position concealed cistern including flushing plate of approved make (to the entire satisfaction of Engineer-in- charge).complete in all respect. [CSR item No.30.6 c] (item for 01 no. New & 03 existing bathroom) |
| 95 | Providing & fixing in position Chinaware extended wall mounted E.W.C. type suite (size 66x46x77.5 cm) with P-trap or S-trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. Chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. Chinaware wall mounted E.W.C. without cistern including seat cover complete in all respect [CSR item No. 30.5 b](Item for 01 No. New &03 No. existing bathroom) |
| 96 | Providing and fixing stainless steel Health faucet complete in all respect. (CSR- 30.24) (item for 01 no. New & 03 existing bathroom) |
| 97 | Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P brass bib cock with wall flange.[CSR item No. 30.69 A (ii)(item for 01 no. New & 03 existing bathroom) |
| 98 | Providing and fixing in position C.P Brass bath tub spout with wall flange of approved make (To the approval of Engineer-in-charge) complete in all respect. (CSR30.52)(item for 03 existing bathroom) |
| 99 | Providing and fixing in position CP Brass Grab Bar of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws co20mplete in all respect.(CSR30.12)(item for 01 no. New & 03 existing bathroom) |
| 100 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. [CSR item No. 30.80](item for 01 no. New bathroom, 03 existing bathroom, kitchen & 01 no. Drawing hall) |
| 101 | Providing and Fixing in position Glass shower enclosure L shaped 8mm thick with chrome finish with sliding door and entry from the front of approved make (to the approval of Engineer in- charge) complete in all respect.1200x800 x 1950mm CSR 30.54 a (item for 01 no. chairperson bathroom) |
| 102 | Providing and fixing in position 5mm thick beveled edge mirror of superior glass(of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P brass screws and washers and S/S studs on top complete in all respect(as required by the Engineer-in-charge) (CSR-30.61(a)) Size 600mmx450mm (item for 01 no. New bathroom , 03 existing bathroom & 01 no. Drawing hall) |
| 103 | Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect. (CSR-30.20) (item for 01 no. New bathroom , 03 existing bathroom & 01 no. Drawing hall) |
| 104 | Providing and fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect (CSR- 30.72 (b). PVC tube connection of size 15mm x 450mm with C.P. Brass nut. (Item for 01 No. New bathroom, 03 No. existing bathroom & 01 No. Drawing hall). |
| 105 | Providing and fixing in position vitreous Chinaware white Indian make large flat back or angular lipped front urinal 375 x 390 x 590mm of approved make (to the approval of the Engineer- in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm ,C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. CSR 30.16 (item for 02 existing bathroom) |
| 106 | Providing and fixing partition for different type Of urinals. Toughened Glass Partition 8mm thickness size 450 x 900 mm C/S CSR 30.21 A(iii) (item for 02 existing bathroom) |
| 107 | Providing and fixing in position Sensor electric for urinal of approved make (to the approval of Engineer-in-charge) complete in all respect. CSR item no.30.18A (item for 02 existing bathroom) |
| 108 | Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories: C.P. brass toilet roll holder with flap.[CSR item No. 30.69 B (iv)] (item for 01 no. New & 03 existing bathroom) |
| 109 | Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories C.P. brass towel rack 600mm long with lower hangers.[CSR item No. 30.69 B (vi)] (item for 03 existing bathroom) |
| 110 | Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories C.P brass towel ring square .[CSR item No. 30.69 B (ii)] (item for 01 no. New bathroom , 03 existingbathroom & 01 no. Drawing hall) |
| 111 | Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories C.P. Glass Shelf 600mm long .[CSR item No. 30.69 B (v)] (item for 01 no. New bathroom , 03 existingbathroom & 01 no. Drawing hall) |
| 112 | Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories C.P. brass soap dish holder with glass dish .[CSR item No. 30.69 B (iii)] (item for 01 no. New bathroom , 03 existing bathroom & 01 no. Drawing hall) |
| 113 | Providing and fixing in position C.P/ Aluminum Khunti of approved make (to the approval of Engineer-in-charge) fixed into wall with C.P brass screws and rawl plugs etc. complete in all respect. C.P. brass khunti with 6 pegs [(CSR- 30.63)c](item for 03 existing bathroom) |
| 114 | Providing and fixing in position storage type automatic electric water heater pressure non pressure type thermostatically controlled single phase vertical wall mounted of approved make (to the approval of engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 mtr three core flexible cord with plug, non-return valve and pressure release valve complete including fixing and testing complete in all respect.(CSR 30.101(a) 25 Ltr capacity water heater. (item for 03 existing bathroom & Kitchen) |
| 115 | Providing and placing in position on terrace ( at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in- charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank. (CSR-30.97A (i)) Triple layer Tanks. |
| 116 | Providing and fixing in position G.I tank Nipple of approved make (to the approval of Engineer-in- charge) complete in all respect. G.I tank nipple 20mm i/d (CSR-30.98(b)) |
| 117 | Providing and fixing in position automatic brass ball cock in Tanks. brass ball cock with rod and plastic ball 20mm i/d(CSR-30.96A) (ii)] |
| 118 | Providing and fixing in position C.P. brass Tumbler Holder of approved make (to the approval of Engineerin - charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.(CSR 30.22) (item for 03 existing bathroom) |
| 119 | Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects. uPVC Pipe6Kgf/cm2 o/d40mm CSR 28.12 B (a)(Item for 01 no. New bathroom , drawing room and kitchen) |
| 120 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. Double bowl Sink without drain board Overall size 1330x515 bowl size 560x410x200mm CSR 30.47e(Item kitchen) |
| 121 | Providing & fixing in position C.P brass Sink mixer swinging spout (table mounted) with 450mm long flexible hose of approved make (to the approval of Engineer-in-charge) complete in all respect. CSR 30.51 (Item kitchen) |
| 122 | Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect. Water Cooler Full Steel Body 60/80 ltr Capacity without Stabilizer CSR30.25 (b)(01 no. 1T8 Shivalik Sadan & 01 no. Guest House) |
| 123 | Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.CSR-30.27. (01 no. 1T8 Shivalik Sadan & 01 no. Guest House) |
| 124 | Providing & fixing in position Water Dispenser Top Loading (with refrigeration capacity 15 ltr) of approved make (to the approval of Engineer-in-charge ) dispensing hot/cold/ambient water including cost of two no. 20 ltrs packaged drinking water bottles and carriage complete in all respect.CSR-30.26. (01 no. 1T8 Shivalik Sadan & 01 no. Guest House) |
| 125 | Providing and fixing fountain complete in all respect including civil, plumbing and electrical works (Non Scheduled Item)(01 no. 1T8 Shivalik Sadan & 01 no. Guest House) |
| 126 | RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT &HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. Including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring AC supply terminal point having 1No 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. (CSR item No. 34.01 (ix)] |
| 127 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5 sq.mm (un-sheathed) CSR item No. 34.09(ii) |
| 128 | Overall size 2.5 sq.mm (Un-sheathed) CSR item No. 34.09(iii) |
| 129 | Overall size 4 sq.mm (Un-sheathed) CSR item No. 34.09(iv) |
| 130 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-Heavy Gauge PVC Conduit Pipe 25 mm dia.(Flushed) (CSR item No. 34.12 (x)] |
| 131 | Heavy Gauge PVC Conduit Pipe 50 mm dia. (Flushed) (CSR item No. 34.12 (xiii)] |
| 132 | Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- PVC Flexible Pipe 25mm dia. (CSRitem No. 34.12 (xxv(b)] |
| 133 | Providing and Fixing ceiling LED Light 9/6 watt (Great White) |
| 134 | Providing and Fixing ceiling LED Panel Light 36 watt 600 mm × 600 mm (Great White) |
| 135 | Providing and Fixing ceiling LED Strip 5 meter long (Great White) |
| 136 | Providing and Fixing fancy wall Light 15 watt (Great White) |
| 137 | Providing and Fixing fancy Bed side Light 5 watt (Great White) |
| 138 | Providing and Fixing LED Tube Light 20 watt 4\"/2\" (Great White) |
| 139 | Providing and Fixing D - Clump and pipe 1.5 ft. long for ceiling fan (Iron Heavy Duty) |
| 140 | Providing and Fixing ceiling LED Light 36 wattPanel2\"X2\" (Great White) |
| 141 | Providing and Fixing ceiling LED Light 18 watt Square 1\"X1\" (Great White) |
| 142 | Providing and Fixing LED Strip 5 mtrs.(Philips) |
| 143 | Providing and Fixing LED Bulb 15 watt(Havel’s) |
| 144 | Providing and Fixing LED Tube 20 watt(Havells) |
| 145 | Providing and Fixing Exhaust Fan(Havel’s) |
| 146 | Providing and Fixing Ceiling Fan 48₺(Crompton) |
| 147 | Providing and Fixing Ceiling Fan 36₺(Havel’s) |
| 148 | Providing and FixingCeiling Fan pipe (Rod) 1½´ (18₺) with D clump |
| 149 | Providing and Fixing MCB DP Changer 63 Amp. (Havells ) |
| 150 | DISMANTLING WIRING POINTS & FITTINGS:Dismantling old wiring points including necessary repairs to wall etc:- Fan, light or call bell point (CSR item No. 34.39 (i)] |
| 151 | Wall socket, power plug point (CSR item No. 34.39(ii)] |
| 152 | Removal of existing Ceiling fans/ Exhaust fans (CSR item No. 34.39(iv)] |
| 153 | REPLACEMENT OF WIRES, COVER RAMES,MODULAR SWITCHES, CONCEALED METALBOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPEWIRING SYSTEM (WITH MODULAR TYPEACCESSORIES) Derived from 34.01:Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm,1100volts grade (For 6Amp. wall socket &plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR34.01Wiring fan point (Without fan box) )(CSR item No. 34.08 (i)a] |
| 154 | Wiring light point )(CSR item No. 34.08 (ii) |
| 155 | Wiring call-bell point )(CSR item No. 34.08 (iii) |
| 156 | Wiring 6 Amp. wall socket point )(CSR item No. 34.08 (iv) |
| 157 | Wiring 16/20 Amp. power plug control point ) (CSR item No. 34.08 (vi) |
| 158 | RECESSEDPVCCONDUITPIPEWIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring fan point (With fan box( CSR item No. 34.02 (i)b |
| 159 | Wiring light point ( CSR item No. 34.02 (ii)] |
| 160 | Wiring call-bell point( CSR item No. 34.02 (iii)] |
| 161 | Wiring 6 Amp. wall socket point ( CSR item No. 34.02 (iv)] |
| 162 | Wiring 16/20 Amp. power plug control point ( CSR item No. 34.02 (vi)] |
| 163 | MINIATURE CIRCUIT BREAKERS/RCBO\"s/ RCCB\"s:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) (CSR item No.34.16 A(ii)] |
| 164 | MCB Four Pole 50, 63amp. (10kA, Curve-C) (CSR item No.34.16 A(xvi)] |
| 165 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB\"s/RCBO\"s/ RCCB\"s:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distribution board with provision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-TP&N Vertical Double Door Distribution Board 4 way each (CSR item No. 34.17(ix) |
| 166 | SHEET METAL IRON CLAD SWITCHES: Supply and erection of sheet metal Iron Clad Switches on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications:-ICTPN Switch 100 amp., 415 volts (CSR item No.34.18 (vii) |
| 167 | SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-Bakelite Batten Holder (Large size) CSR item No. 34.15 (xxvii) |
| 168 | Ceiling Rose (Flush Piano type) CSR item No. 34.15 (xxvi) |
| 169 | XLPE INSULATED LT CABLES:XLPE INSULATED ARMOURED CABLES (UNDER GROUND):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 100volts grade as per IS:7098 (Part-1) 1988 to be laid 1 metre below ground level including excavation, sand cushioning, covering with sand & First Class bricks and back filling the trench etc., of the required size as per PWD General SpecificationsOverall size 35 sq.mm (4Core) Armoured (Underground) (CSR item No.34.10 E (xxxix) |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
