Tender For Upgradation Of Kitchen Of P-31 At Af Stn Bhowali.
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
14 Oct 2024
0 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhowali → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation Of Kitchen Of P-31 At Af Stn Bhowali.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Oct-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Oct-2024 |
| 2 | 08-Oct-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-Oct-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting,complete all as specified and directed. |
| 3 | S&F Glazed ceramic tiles colouredin vertical surface 450X300X7mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 4 | M&L non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.18 sqm but n exc 0.36 sqmin floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 5 | M&L for screed bed or bedding layer of mortar15 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed. |
| 6 | M&L non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.18 sqm but n exc 0.36 sqmin dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 7 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar. |
| 8 | S&F16-18 mmthick Granite (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platformsincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified. |
| 9 | M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. |
| 10 | Taking up or down 15 mm bore steel steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer - in - Charge. |
| 11 | Taking up or down 20 mm bore steel steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed byEngineer - in - Charge. |
| 12 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 13 | Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 14 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 15 | S&F in repairs CP brass Soap dish, fixed to walls with chromium plated (CP) brass screws complete all as specified and driected. |
| 16 | S&F in repair15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwedfor 15 mm iron pipe, complete all as specified. ( Make : Cera, Cat.No.F1021201) |
| 17 | S&F in repair 15mm bore single lever basin mixer with 300 mm extended body and 600 mm braided connection pipe (without pop-up) for mixing hot & cold water screwed down for iron/cpvc pipe and fixed by authorised company worker, complete all as specified and directed.( Make : Cera, Cat.No.F1021452) |
| 18 | S&F in repairs 15mm Bib Tap long nose with wall flange and aerator, chromium plated fancy type long shank screwed for Iron Pipe or for brass ferrule complete all as specified and as directed.(Make : Cera, Cat.No: F1021151) |
| 19 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed.. |
| 20 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 21 | S&F Corner glass shelf assemblyof size 225 x 225 mm consisting of 5.5 mm thick sheet glass shelf with chromium plated bracket guard and railing, complete all as specified and directed.(Make : Cera, Cat.No: F1021151) |
| 22 | S&F PVC connections 15mmdia , 450mm long, , withPTMT nuts& washers at both ends complete all as specified. |
| 23 | S&F Brass Chromium plated Towel Ring ,complete all as specified and directed.(Make : Cera, Cat.No: F5002105) |
| 24 | S&F in rapirVitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass.complete all as specified and as directed by Engineer-in-charge. |
| 25 | S&F in repair full pedestal for WHBcomplete all as specified. |
| 26 | S&F in repairs 15 mm bore brass, chromiun plated, sink mixer(wall mounted with 170 mm long swivel spout and wall flange,screwed down high pressure withlong screwed shanks and fly nuts, screwed for iron pipecomplete all as specified and directed..(Make : Cera, Cat No : F2008501) |
| 27 | S&F sinksmade of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipebowl size 600mm x 450mm x 160mm complete all as specified and directed. |
| 28 | S&F plate rack of size (24\"X36\"X10\") including fixing of screws complete all as specified. Make : Prayag, Cat No P-336 |
| 29 | S&FFramed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 |
| 30 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 31 | S&F Welded steel wire fabric supplied and fixed complete to wood or steel members Weight per square metre n.exc 4 kg complete all as specified and as directed by Engineer-in-charge. |
| 32 | S&F Hat pegs,Aluminium solid body, 125mm to 175 mmcomplete all as specified & directed |
| 33 | M&L for 75mm dia PVC floor trap, with grating including jointing with solvent cement, complete all as directed and specified |
| 34 | S&F for 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 35 | S&F for 75 mm bore PVC (SWR) vent cowls. |
| 36 | S&F for 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 37 | S&F for 110 mm bore PVC (SWR) bends of any radius with access door. |
| 38 | S& F for 110 mm PVC (SWR) vent cowl |
| 39 | S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 40 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each but with shutters (Without taking off shutters from the frames)complete all as specified and directed. |
| 41 | Taking down chowkat or frames but with shutters( without taking off shutters from the frames) exc 1.5 Sqm and n exc 4 Sqm eachcomplete all as specified and directed. |
| 42 | Supply and fixing Anodised aluminium powder coated of any colour,frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness or powder coating not less than 50 micron)complete all as specified and directed.. |
| 43 | Supply and fixing Anodised aluminium powder coated of Approved colour, window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified. (Thickness or powder coating not less than 50 micron)complete all as specified and directed.. |
| 44 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, fram (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners.Hardware:[casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glasscomplete all as specified and directed..(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose). |
| 45 | S&F of 5.0 mmthick sheet glass ,ordinary qualityand size exc 0.50 Sqmand fixed todoor/window shutter and partition wall by means of glazing clips rubber strips etc. |
| 46 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 47 | S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed . |
| 48 | S&Faluminium extruded section body, door closer hydraulically regulated, designation No. 1, universal type, suitable for door shutters of700mm in width and of weightnot more than 35kg and fixed. |
| 49 | M&L for RCC (NominalMix) type B1, 1:2:4, using(20 mm graded stone agg) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 50 | S&F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slab andhooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified |
| 51 | Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. and flat fair finished surfaces, complete all as specified and directed. |
| 52 | Demolition of brickwork/stone boulders, masonary built in cement mortar incl all quoins, arches,pillars,etc. but excl ashlar facings, dressed stone works & precast concrete surfaces. |
| 53 | M&L brick work with sub class \"B\" bricks old size best quality bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) all as specified and directed. |
| 54 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified. |
| 55 | M&L for 15 mm thick rendering in CM 1:4 on fair faces of brickwork or concrete surfacesfinished fair and even complete all as specified and as directed by the Engineer-in-Charge. |
| 56 | M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge. |
| 57 | M&L rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement, complete all as specified and directed. |
| 58 | M&L for preparing newly plastered surfaces of walls and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 3mm thick wall care putty, complete all as specified and directed. |
| 59 | Complete removal of existing treatment on surface of wall and applying 2 coats of oil bound distamper emulsion including a coat of alkali resistant primer over 3 mm thick wall care putty, complete all as specified and directed. |
| 60 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even in ceiling without using extra cementcomplete all as specified and directed.. |
| 61 | M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash. |
| 62 | M&L preparation of old plastered surface of ceiling by brooming down, scraping and applying one coat of Synthetic enamel paint on plastered surfaces all as specified & directed |
| 63 | S&F Providing cupboard cabinet with shutter complete in required sizes made out of 18 mm thick one side decorative lamination & other side white balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters and panels made out of 18 mm thick one side decorative laminated PVC sheet all brackets 5.5 mm screws etc. All the edges shall be covered with 2 mm thick PVC edge bonding tape of 90 degree edge bend finish as per make and specification mentioned as per drawing and specification approved by Engineer-in-Charge complete all as specified. |
| 64 | All same as per Sl No. 63 here-in-above, but both sides white laminationcomplete all as specified and directed.. |
| 65 | S&F stainless steel modern plain basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\"x20\"x4\" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge |
| 66 | S&F stainless steel modern plain basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\"x20\"x6\" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge |
| 67 | S&F stainless steel modern plain basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\"x20\"x8\" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge. |
| 68 | S&F stainless steel modern cup and saucer basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\"x20\"x4\" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge |
| 69 | S&F stainless steel modern perforated cutlary basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\"x20\"x4\" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge. |
| 70 | S&F stainless steel modern thali basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\"x20\"x8\" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge. |
| 71 | S&F 60 cm long stainless steel telescopic channels for sliding modular kitchen racks. Make: Godrej or equivalent make as approved by Engineer-in-charge. |
| 72 | S&F stainless steel L hinges complete all as specified and directed.. |
| 73 | S&F stainless steel handles 100 mm long fabricated type, bright polished decorative type fixed with brass screwscomplete all as specified and directed.. |
| 74 | S&F magnetic catchercomplete all as specified and directed. |
| 75 | Dismantling of brick or brick tiles laid bedded and pointed in any mortar on roof including cleaning for refixing etc complete |
| 76 | Dismantling of roof, floors, (other than groung floors) staircase, landing chajja and similar suspended work of any thickness or description etc complete all as specified. |
| 77 | M&Lfor providing PCC 1:3:6type-C 1, (using 20 mm graded stoneaggrigate ) padding over slabas levelling course complete all as specified and directed. |
| 78 | M&L for providing 10 mm thick plaster in CM 1:3 mixed with polymer based water proofing compound when levelling coarse is still greencomplete all as specified and directed.. |
| 79 | M&L cutting out creck in V section in existing roof, chajjas or similar work up to 40 mm deep and cleaning the same with water jet to get rid of any loose material and wetting , grouting with cmenet & sand mortar 1:3 mixed withliquid WPC all as directed. |
| 80 | M&Lfor applying Smart Care Damp proof Ultra fibre reinforced elastometric liquid applied water proofing membrane as in roof treatment @ 1 Litre per 10 sqft inclusive of all three coats as per following application process:-(a) Prepare the surface by cleaning with high pressure water jet/wire brushes to ensure that it is free of dust, oil, grease, grime and loose particlescomplete all as specified and directed..(b)Damaged portion if any to be repaired before application of roof treatment as per manufacturer\"s instruction.(c) Applying self priming coat of Smart Care Damp proof Ultra duly diluted with water in 3:1 ratio by volume.Allow the primed surface to dry for at least 3-4 hours prior to application of subsequent coat. (d)Applying 2 perpendicular coats of Smart Care Damp proof Ultra without any dilution to achieve a forced system coverage.Allow it to dry for at least 4-6 hours between two coats . NOTE:WORK SHALL BE CARRIED OUT BY THE AUTHORISED APPLICATORS OF THE MANUFACTURER IN CLOSE SUPERVISION OF EXECUTVE STAFF UPTO ENGINEER-IN-CHARGE LEVEL. Contractorshall give 05 yearsGuarantee for water proofing treatment carried out. MAKE-ASIAN PAINTS, STP LTD. |
| 81 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceilingroses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.. complete all as specified and directed. |
| 82 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, and making good the disturbed surfaces on wall/floor etc complete all as specified and directed. |
| 83 | Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through andincluding rigid PVC or PVC casing coping including earth wire complete all as specified anddirected. |
| 84 | M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy dutydrawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with,including steelbox of required module forfixing ofmodular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .Note : surface conduit shall be laid in ceiling portion only. |
| 85 | All as per Serial Item No 84 above but for one 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed. |
| 86 | All as per Serial Item No. 84 above but one 3 pin socket outlet 5 Amps on independent board complete all as specified and as directed. |
| 87 | All as per serial Item No.84 above but for 15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-strandedcopper conductor with 4.00 Sqmm PVC insulated FRLS multi-strandedcopper conductor as earth wire complete all as specified and directed . |
| 88 | Supply and Fixing Modular switch 1 way 6A, 1 module. all as specified and as directed. |
| 89 | Supply and Fixing Modular switch 1 way 16A, 1 moduleall as specified and as directed. |
| 90 | Supply and Fixing Modular Socket, 6A - 2/3 pin combined 2 moduleall as specified and as directed. |
| 91 | Supply and Fixing Modular Socket, 6A/16A - 2/3 pin combined 2 moduleall as specified and as directed., |
| 92 | -Ditto- but 4 moduleall as specified and as directed. |
| 93 | -Ditto- but 6 moduleall as specified and as directed. |
| 94 | M&L Submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLSPVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through conceald conduit and connected to common earth dollycomplete all as specified and directed.Note :- Three runs of 4 sqmm shall be measured as one length for the purpose of measurement. |
| 95 | M&L Submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLSPVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through existing conduit and connected to common earth dollycomplete all as specified and directed.Note :- Three runs of 6 sqmm shall be measured as one length for the purpose of measurement. |
| 96 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp ncluding connecting up with three core flexible copper conductor cable of suitable size completeall as specified and directed.i |
| 97 | Supply and fixing of pride plus Inverter LED batten 20 Watt,6500 K, 230 Volt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours complete all as specified and directed by engineer-in-charge. make havells, or equivalent in crompton/bajaj/wipro |
| 98 | Supply and fixing LEDbulb of 10 watt with 6500K colour temp, infittingcomplete all as specified and asdirected Make :Havells / Bajaj /Wipro |
| 99 | Supply and fixing Ceiling rose, surface bakelite, 65 x 50 mm, three terminals, 230 Volts complete all as specified and as directed. |
| 100 | Supply and fixing Factory made distribution board in sheet metal enclosure in double door with 200A ratedbus bar,SPN 8 way, 240V for fixing MCB\"s complete all as specified and as directed. |
| 101 | Supply and fixingMCB SPN ‘C’ Curve 10KA, 40 amps complete all as specified and directed . |
| 102 | Supply and fixing MCB SP ‘C’ Curve 10KA, 5 to 32 amps complete all as specified and directed . |
| 103 | Supply and fixing Blankig plate for filling gap of MCB complete all as specified and directed. |
| 104 | Supply and fixing Blankig plate for filling gap of switches any typecomplete all as specified and directed. |
| 105 | Supply and fixing Lamp Holder, insulated body with back plate, 230 Volts for batten fittings including taking down old one complete all as specified and as directed. |
| 106 | Supply and fixing exhaust fan made of steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louverscomplete all as specified and directed. |
| 107 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket modular type complete with one single pole MCB 20Amps make Havells/legrand/schneider |
AI Tender Summary
Tender Timeline
Oct 08, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 08, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 14, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 14, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender