Tender For REPAIR TO SINGLE OFFR ACCN, GUEST ROOM AND OFFRS MESS OF EAST SIDE OF LEHL MARG INCLUDING TELEPARA UNDERGE (S) BAGDOGRA.- 1 Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified. 2 Material and labour forVitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified . 3 Material and labour forVitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in verticle surfaces such as skirting / dado over and including 10 mm thick screed bed / backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified. 4 Material and labour for glazed ceramic coloured/ digital printed of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over andincludingcement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified.( screed bed shall also deemed to be included in the quoted rate by the contractor ). 5 M&L for coloured Non skid joint free ceramic tiles (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified. 6 M&L for coloured Non skid joint free ceramic tiles(Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, vertical surfaces, in skirting etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match with the shade of tile including 15 mm thick screed bed in cement mortar 1:6 complete all as specified. 7 Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from sitecomplete all as specified . 8 Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm eachcomplete all as specified . 9 M & L pressed steel door frame of size 105mm x 60mm with one or more rebates including necessaryfixing lugs , hinges, lock strike plate etc complete as specified. 10 S&F 30mm flush shutter, solid coare construction, with block board core and plywood face panel, commercial type on both side include for the provision of suitable blocks for mortice locks, latches or other fittings etc complete all as specified.(Make- SA Plywood/Centuri/Kit Ply) 11 S&F 150 mm long Aluminium anodised barrel tower boltscomplete all as specified . 12 S&F 150 mm size aluminium anodised door handlescomplete all as specified . 13 S&F 125 mm butt hinges medium weight cold rolled mild steelcomplete all as specified . 14 M&L for sliding door bolt of 300mm long plateAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified . 15 M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primercomplete all as specified . 16 S&F in Repairsfactory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars docetailed or welded complete all as specified. 17 S&F in Repairsfactory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with out glazing bars docetailed or welded complete all as specified. 18 S&F in Repairs steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified. 19 S&F of mild steel work such as window guard bars and similar work conforming to Fe – 290 Grade – E 165 complete all as specified. 20 M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified. 21 S&F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples and beads complete all as specified. 22 S&F for 3mm thicksheet glassfixedwith oil putty/nut boltin square n.exc 0.5 sqm in each pane complete all as specified 23 Taking down cement plaster on wall / Ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified. 24 M&L for rendering 15mm thick in CM 1:4as in fair faces of brick work or concrete surface of wall and finished surface even and fair without using extra cement with using wpc as per manufacturer instruction (measure seperately)complete all as specified. 25 M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface complete all as specified. 26 M&L for rendering 5mm thick plastering in cement mortar (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smoothwithout using extra cementcomplete all as specified . 27 M & L for preparing new Plasteredsurfaces of walls and finishing the walls with two coats ofAcrylic smooth exterior paint of required shade for New work over and including priming one coat of exterior primer all as per manufacturers specification and as specified. 28 M&L for prepartion of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified. 29 M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified. 30 .M & L for complete removal of existing treatment and finishing the walls with two coats of Acrylic smooth exterior paint of required shade for Old work over and including priming one coat of exterior primer all as per manufacturers specification and as specified. 31 M&L for preparation of old decorated distempered surfaces of walls and applying one coat of acrylic based distemper emulsion of any tint/shade including necessay wall putty/white cement wherever required to fill the small hole and cracks etc complete all as specified. 32 M&L for preparation of old decorated distempered surfaces of walls by applying two coat of acrylic based distemper emulsion of any tint/shade including a coat of wall care putty to get a even and smooth surfaces of walls complete all as specified. 33 M&L one coat of white wash on walls over old surfaces of wall incl preparation of surfaces complete all as specified. 34 M&L one coat of white wash on ceiling surface including preparation of old surfaces complete all as specified. 35 M&L for preparation of old wooden based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint 1st quality complete all as specified. 36 M&L for preparation of old steel and iron surfaces of any description not otherwise described, over 10 Cm width or girth and applying one coat of synthetic enamel paint 1st quality complete all as specified. 37 Taking down old chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame) complete all as specified. 38 S&F for factory made solid pannel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC C channel having a PVC sheet strip of 20mm width stuck inside the solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the ms frame welded/sealed to the stiles and rail with suitable pvc sheet beading, and jointed together with solvent cement, supplied and fixed in repair in the frame at site on per specification and drawings complete all as specified.(Make-M/s Rajshri Plastiwood Ltd/ M/s Sintex India Ltd / Marino) 39 S&F for solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawingcomplete all as specified .((Make-M/s Rajshri Plastiwood Ltd/ M/s Sintex India Ltd / Marino) 40 S&F 100 mm long stainless steel butt hinges complete all as specified and directed.complete all as specified. 41 S&F150 mm long Aluminium anodised barrel tower bolts complete all as specified. 42 S&F150 mm long aluminium anodised door handles complete all as specified. 43 S&F in repairCP towel rail600 mm long complete all as specified. 44 S & F in repair fancy type pillar taps, brass with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm borecomplete all as specified . 45 S&F in repair swivel shower of brass CP with shower arm 125 mm size for fixing with 15 mm bore GI pipe complete all as specified 46 S & F in repair Grating doom 125 mm dia with waste hole/without hole of PTMT (Minimum weight 40gms) complete all as specified. 47 S&F in repairs Bib taps fancy type brass chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified. 48 S&F in repair 15 mm bore brass CP angle cock single way with flage complete all as specified 49 Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed. 50 S&F in repairs vitreous china wash basin, white, flat back, size550x400m excluding taps, waste , chain & plug & porcelain stopperincluding brackets incl cutting for pinning in ends of bracketes or erecting standand fixing and supply and waste pipe complete all as specified 51 S&F in repairs Mirror of size 600mm x 450 mm selected quality, and fixed to wall with chromium plated brass screws and cup washers including royal plug all complete as specified. 52 S&F in repair 10 ltr capacity PVC flushing cistern (Duel flush) low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified. 53 S&F in repair 1st quality vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete beddingcomplete all as specified . 54 S&F in repair 1st quality vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe, Seat coveretccomplete all as specified . 55 S&F in repair 1st quality vitreous china wash down water closet pan with flushing cistern single piece (pedestral pattern),EWC of size 395x680x770 mm with S trap 200 mm including fixing bolts plastic water closet seat cover closed pattern with flat bottom and mild steel chromium plated oraluminised hinging device including making all necessary connections complete all as specified. 56 S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumisedhanging devicecomplete all as specified . 57 S&F Brass CP health faucet 25mm dia with crutch or butterfly handle with 1 mtr flexible tube and hook complete as fixed in repair complete all as specified (MAKE : ESSCO cat no. EHS-551/Jaquar/Marc) 58 S&F in Repairs PVC connection pipe with nut at both ends n.exc. 450mm for hot and cold water complete as fixed in repair.complete all as specified. 59 S&FPVC waste pipe for WHB/Kitchen sink complete as fixed in repair.complete all as specified. 60 S&F in repair 20mm dia , Stain less steel, Curtain rodwith fixing ornamental brackets etc. complete as specified. 61 Taking up or down GI tubing 15mmbore pipe and connection including cleaning for refixing or removal from site of workcomplete all as specified . 62 Taking up or down GI tubing20mm bore pipe and connection including cleaning for refixing or removal from site of workcomplete all as specified. 63 S&F 15mm bore medium grade GI pipe with all fittings laid in floors fixed to wall etc complete all as specified 64 S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified. 65 Demolition slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortarcomplete all as specified . 66 M&L for 16-18 mm thick Granite work (table rubbed and polished) in decorative shelves, steps ,pillers ,jambs,coocking plateform etc laid over 15mm screed bed in CM (1:6) with chemfering of edgeincluding pointing in white cement with pigment to match with shade of granite includinggrinding & mirror polishing with wax polish complete all as specified and as directed. 67 M & L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorativechoice lamination & other side balancing white lamination, fixed with screwsto timber frame work as in cupbord door/shelves/wall panelling including 6 mm thick wooden leaping and dismantling of old boarding complete all as specified (NOTE : the cost is including polished to wood surfaces) (Make : Kitply/Anchor/Green Industrees Ltd) 68 S&F 75 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-22 complete all as specified. 69 S&F 100 mm long Aluminium anodised barrel tower bolts complete all as specified 70 S&F 100 mm long aluminium anodised door handles complete all as specified. 71 M & L for 75mm Hasp and staple, safety type, aluminium anodisedwith mild steel hinge pin including bolt to hinge plateand fixed with screws complete all as specified. 72 S&F in repairs stop valves fancy type brass, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified. (Make : ESSCO/Marc/Cera/Jaquar). 73 Hacking out old broken glass (any thickness, size, quality or description) from wooden, metal frame including punching or drilling out old glazing pins/spring clips and providing new ones for 3mm thicksheet glassfixedwith oil putty/nut boltin square n.exc 0.5 sqm in each pane complete all as specified 74 S & F in repair stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified. 75 Dismantling water tank exc 500 & n.exc 1000 ltr capacityand removing to store complete all as specified. 76 S&F 1000 ltrs capacity rotaional moulded polythelene water storage(cylindrical vertical with closed top) hoisted and fixed in positions including necessary fittings all specified in SSR Part Icomplete all as specified. 77 Supply and fix in repair powder coated (minimum 50 micron) anodised aluminium frame for doors, windows, ventilators,partition with one or more rebateswith stainless steel screws /including PVC protector sheeting and joining cleat for fixing etc. including taking down old one complete all as specified. 78 S&F in repairs powder coated aluminium sliding window sliding on 3 track one shutter glazed with and including 4mm thick plain sheet glass and other shutter with stainless steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire stapples rubber gasket stopper aluminium grill of aperture size of grill 70mm , handle 100mm, frame of section 100mm X 45mm X 1.55mm and of shutter of section 40mmX 20mm X 1.55mm complete all as specified. 79 M& Lin repair for fabrication and fixing of powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handlesetc complete for aluminium frame of size 101.6mm x 44.45mm x 2mm and section of bottom and top rail of section114mmx44.45mmx2mm thick and and lock rail shutter frame of 83mm x 44.45mm x 2 mm with and including panels of 5.5 mm thick plain/frosted float glass,and with anodised aluminium snap beading of size 18.2mmx16.66mm scred for fixing fully including double action door spring hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and all necessary fittinngsand EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter ,1 no heavy duty door shutter 1no 200mm long aluminium tower bolt per shutter including taking down old one complete all as specified. 80 S&F in repairs 150 mm overall length cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified. 81 S&F in repairs Aluminium (Die cast) body door closer hydraulically regulated desination No 1, universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kgcomplete all as specified.
