Tender For Provision Of Toilet With Bathroom Washroom Provn Of Concrete Washing Point With Shed And Chequered Tiles Path And Special Repair Of P/36 And 38 Of Maratha Li At Different Pockets Area Of Age B/R And Age E/M Under Ge Tenga
Tender Value
48.70 Lakhs
Estimated cost
Bid Submission
24 Sep 2024
0 days left
EMD
97400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tenga Valley → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Toilet With Bathroom Washroom Provn Of Concrete Washing Point With Shed And Chequered Tiles Path And Special Repair Of P/36 And 38 Of Maratha Li At Different Pockets Area Of Age B/R And Age E/M Under Ge Tenga
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement cocrete (unreinforced) in ground, floors and pavings n. exc 15 cm thickness (below or above ground level) |
| 2 | M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing roughcomplete all as specfied and directed |
| 3 | M&L forscreed bed or bedding layer of mortar 20 mm thickin CM(1:6) for laying floor tiles. |
| 4 | M&L forChequred cement concrete tiles 20cmx20cmx25mm thick,set,jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments. |
| 5 | M&L for providing,cement concrete type B1(1:2:4) using 20mm graded aggregate in roof kerbs or mud stops,rounded or chamfered on edges |
| 6 | S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed. |
| 7 | S&F Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed. |
| 8 | S & F framed work such as grills, gratting,framed brackets of angles or tees with web and flange cut to shapeetc with ends of bars, shouldered and/or reveted, or forged into spikes, framed guard bars, framed works of water tankes,gatesand similar work con-forming to Fe.290.Gde-E-165. |
| 9 | M&L for preparation of new steel surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 10 | M&L for Cement concrete in foundations, filling and mass concrete with type-D21:4:8 with (40 mm greded aggregate). |
| 11 | M&L for MS TMT bars10mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 12 | M&L for MS TMT bars 05mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders. |
| 13 | M&L for RCC Type B1 1:2:4 (20 mm graded aggregate) onSlabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like |
| 14 | M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide. |
| 15 | M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles . |
| 16 | M & L for 450 x 350 x7 mm thick glazed coloured ceramic tiles on vertical surface of wallset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 17 | S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 18 | S&F 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 19 | Taking up or down 15 mm boresteel water tubingand connections including clfor refixing or removal to store |
| 20 | Refixing15 mm bore old steel tubing and conncetions in new or old position to walls |
| 21 | Taking up or down 20 mm boresteel water tubingand connections including cleaning or refixing or removal to store |
| 22 | Refixing20 mm bore old steel tubing and conncetions in new or old position to walls |
| 23 | S&F 15 mm dia bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 24 | S&F 15mm bore angle stop valves, fancy type chromium plated, screwed down, high pressure,screwed both ends for iron pipe or for unions & fixed. |
| 25 | M & L 100 mm thick Cement concrete type D2,1:4:8 (40mm graded aggregate) as in sub base, including form work complete as as specified and directed by Engineer-in-Charge |
| 26 | M & L PCC 1:3:6type C1, (using 20mm graded stone aggregate) as in surface channels and drains . |
| 27 | M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete. |
| 28 | Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil |
| 29 | Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil. |
| 30 | M&L for precast cement concrete solid building blocks (1:3:6), type C-1, 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:4), complete, laying inner side of wall. |
| 31 | M&L for re-inforced cement concrete 1:2:4 type B-0(12.5 mm graded aggregate) as in beams, plinth beams, cantilevers, bressummers, lintels over 1.5 m span etc complete. |
| 32 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete. |
| 33 | M&L rendering 15 mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement . |
| 34 | M&L Second class HW in Scantling clean sawn all as specified. |
| 35 | M&L for rendering 15 mm in CM (1:6) over concrete wall surfaces finished even and smooth without using extra cement. |
| 36 | M&L for newly plastered surfaces of walls and applying two coats of cement based paint, over a coat of primer complete all as specified and directed. |
| 37 | M&L for Preparing newly plastered surfaces of walls and applying three coats of white wash. |
| 38 | Returning/filling in including spreading, levelling, watering and well remming in hard/dense soil. |
| 39 | Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point. |
| 40 | M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface. |
| 41 | M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as cement concrete in Sub-base floors, sub-bases floors and pavings etc complete all as specified. |
| 42 | M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles . |
| 43 | M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement. |
| 44 | S & F 3mm thick figured glass, pin head glazing with oil putty /wooden beads in squares n exc 0.50 Sqm in each pane. |
| 45 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing. |
| 46 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frameshall be covered with heat moulded plain colour PVC \"C\" channelhaving a PVC sheet strip of 20mm width stuckinside with solventcementfor stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frameat siteas per specification & drawing. |
| 47 | S&F 100mm size butt hinges, medium weight, cold rolled complete all as specified as directed. |
| 48 | S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 49 | S & F 100mm size extruded aluminium alloy handles, fabricated type anodised |
| 50 | S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed |
| 51 | S & F 150mm size extruded aluminium alloy handles, fabricated type anodised |
| 52 | S & F vitreous china Squatting pan \"Orissa Pattern\" size 580 x 440 mm white with integral foot rest. |
| 53 | S&F vitreous china bowl urinal flat back, size of 465x355x265 mm white (minimum), (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs, fixing of flush pipe, waste pipe, grating and connection to water supply pipe complete all as directed. |
| 54 | S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe(minimum weight 60 gms). |
| 55 | S & F10 litres PVC, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and bracketscomplete. |
| 56 | S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls |
| 57 | S&F PVC (SWR) junction single, (single T) equal or unequal with access door110mm dia. |
| 58 | S&F PVC (SWR) junction single, (single T) equal or unequal with access door75mm bore. |
| 59 | S&F PVC (SWR) bends any radius, bend 110mm dia. |
| 60 | S&F PVC (SWR) vent cowl 110mm dia |
| 61 | S&F PVC (SWR) WC connector 110mm dia lip ring. |
| 62 | S&F75 mm diaPVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 63 | S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints fixed to walls. |
| 64 | S&F PVC (SWR) bends any radius with access door, 75mm dia. |
| 65 | S&F for chromium plated tubular towel rail, 20 mm dia, D type, 60 cmlong between fllanges. |
| 66 | S&F600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board fixed t wooden plugs with chromium plated brass screws and cup washers all as specified and directed |
| 67 | S&Fvitreous china wash hand basin white flat back of size 550mmx400 mmincluding cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia |
| 68 | S&F32 mm bore Low density poly ethylenepipes of pressure rating 6kgf/cm2fixed complete to walls,ceiling or in floors etc. |
| 69 | S&F 15 mm bore chromium plated fancy type pillar tap cast copper alloy with capstan heads, screwed down high pressure,with or without leterred\"Hot ot Cold\" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 70 | M&L for swivel shower rose of PTMT any colour for fixing with 15mm pipe.(Min Wt 40gms) all as specified and directed. |
| 71 | S & F framed work such as grills, gratting,framed brackets of angles or tees with web and flange cut to shapeetc with ends of bars, shouldered and/or reveted, or forged into spikes, framed guard bars, framed works of water tankes stagging,gatesand similar work con-forming to Fe.290.Gde-E-165. |
| 72 | S&F Rotational mounded polythene water storage tank of 1000 ltrs capacity,(multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I. |
| 73 | S&F ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipes of 20 mm dia or brass ferrule and fixed, all as directed. |
| 74 | S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe and fixed. |
| 75 | M&L for construction of 1.20 m dia x 3.00 m deep soakage well, excavation in hard/dense soil foundation PCC 1:3:6 ,wells of honey combed stone masonry wall, including intercepting chamber, screen chamber, RCC cover slab, filling with brick bats etc complete all as specified. |
| 76 | M&L for construction of septic tank for 10 users, in hard/ dense soil, foundation in PCC 1:3:6 type C-1, stone masonary wall in CM 1:4, RCC slab cover including RCC precast manhole cover having 6mm plate embedded all around/ fibre reinforced cover with angle iron frame vent shaft and sludge chamber complete all as specified in ED-2007 and as directed. |
| 77 | Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150mm on after they are laid and tested complete all as specified and directed.. |
| 78 | Material and labour for Salt glased stone ware drain pipe 150 mm dia grade A laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed. |
| 79 | S&F central hole basin mixture brass CP for hot and cold water screwed down for iron pipe complete all as specified and directed |
| 80 | S&F 15mm Brass CP wall mixer for mixing hot & cold water screwed down for PPRC/steel pipe or union of 15mm dia complete all as specified and directed |
| 81 | S & F for vitreous china wash down water closet pan (pedastal pattern) white inclPVC (SWR) 110mm\"P’ trap and WC connector (exclusing fixing bolts, flushing cistern and flush pipe) |
| 82 | S & F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 83 | S & F for toilet paper holder of brass,chromiun plated or stainless steel |
| 84 | Demolition of cement concrete inroofs, floors, beams, staircases, landing and similar works (other than ground floor) etc complete. |
| 85 | M&L for PCC 1:2:4 type B1 using 20mm graded stone agg as in roof padding finished even and fair . |
| 86 | M&L 10mm thick rendering in CM 1:4 on roof surfaces finished even and smooth without using extra cement using WPC @3% by weigh of cement .(WPC will be measured and paid separately) |
| 87 | M&L for preparation of new plastered surfaces ofroof surfaces and applying waterproofing treatment over smooth finished surfaces after application of cold appliedbituminous primer @ 0.30 kg/Sqm and applying hot bitumen 85/25 @ 1.20 Kg/Sqm providing and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00mm thick , weighing 3.5 Kg /Sqm with surface finish by torchapplication method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying with one coat of bituminous based solarreflective aluminium paint @ 100 gms/ Sqm complete all as specified and directed.” |
| 88 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 89 | M&L for reinforced cement concrete 1;2;4 type B1 (using 20 mm graded stone aggregate) for slabs supported on walls , beams and columns, in floors , roofs, landings and in shelves ,chhajja\"s and the like complete with all necessary formwork etc all as specified and as directed. |
| 90 | Dismantling offloor, hearth or tiling including cement mortar bedding (but not backing). |
| 91 | M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles . |
| 92 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm,in floors etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 93 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in floorsurfaces etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 94 | Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar |
| 95 | Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 96 | M & L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement |
| 97 | Material and labour for 5mm thick rendering in cement mortar (1:3) on brick or concrete surfaces of ceiling finshed even and smooth without using extra cement. |
| 98 | M & L for 15 mm thick plasterin cement mortar 1:4 on brick or concrete surfaces usingWPC @ 3% by weight of cement over10 mm thick backing coat in cm 1:4 and finishing the surfaces even &smooth without using extra cement.(WPC will be measured and paid separately) |
| 99 | Supply only integral water proofing compound. |
| 100 | Dismantling of CI soil, rain water pipes,cast and vent pipes of any dia, any pattern including all fittings. |
| 101 | Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store. |
| 102 | S&F Rotational mounded polythene water storage tank of 500 ltrs capacity,(multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I. |
| 103 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm. |
| 104 | S & F in repairvitreous china wash down water closet pan of pedestal pattern, white with \"P\" or \"S\" traps,including connecting to trap and to flushing pipe etc complete all as specified. |
| 105 | S & F in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete. |
| 106 | S&F CP towel ring , fixed with chromium plated brass screws |
| 107 | S&F soap dish, any type, fiexd to plugs with chromium plated brass screws |
| 108 | S & F in repairs chromium plated fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed. |
| 109 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm. |
| 110 | All as per item No 109 above but area not exc 1.50 Sqm. |
| 111 | M&L cutting holes exc half brick but not exc one brick in brick walls built in Cement mortar or Cement lime mortor and stone walls built in lime mortor |
| 112 | S & F 2nd calss hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete |
| 113 | S & F mild steel bands, straps, clamps, hold fasts, wall ties and similar articles conforming to Fe-310-0 |
| 114 | S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0. |
| 115 | S&F 30mm thk flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both side |
| 116 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc |
| 117 | S&F in repair 300mm Mild Steel ordinary rat tail rod pattern springs including roller plate complete. |
| 118 | S & F in repairaluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed |
| 119 | S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length includingvulcanised rubber piece |
| 120 | S&F in repair harrison rails,mild steel,chromium plated with fixing brackets,stops, rollers etc |
| 121 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 122 | S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc0.50 Sqm in each pane. |
| 123 | M&L for fixed in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of apperture 1.18 mm and fixed with tinned tacks or galvanised wire staples. |
| 124 | M&L for preparation of old surface of wood and wood based materials over 10 Cm width or girth and applying one coat of synthetic enamel paint as directed and specified. |
| 125 | M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces. |
| 126 | M&L for Preparing old plastered surfaces of ceiling and applying one coat of white wash. |
| 127 | M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer. |
| 128 | M&L for preparation of old distempered surface of walls including washing down and stopping of distempered surfaces and applying one coat of distempered oil emulsion all as specified and directed. |
| 129 | M&L for complete removal of existing treatment and appling two coat of cement base paint over one coat of primer complete all as specified |
| 130 | Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 131 | All as per item No. 130 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size |
| 132 | All as per item No. 130 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specifieddirected. |
| 133 | All as per item No. 130 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified. |
| 134 | All as per item No. 130 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 4 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified. |
| 135 | S&FSocket outlet 2 in 1, 3 pin, 6amp flush type |
| 136 | S&FSocket outlet 2 in 1, 3 pin, 6 and 16 amp flush type |
| 137 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 16 Amp, 240 Volts complete all as specified & directed. |
| 138 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm ,two to three terminals complete all as specified & directed. |
| 139 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 140 | Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden boardcompleteall as specified and directed. |
| 141 | S&F LED lamp 9/10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha0.85 (min). |
| 142 | Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. |
| 143 | S&F of new generation energy saving and environmental friendly long life LED building securitylight made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed. |
| 144 | S & F in replacement of GI brackets for fixing LED building security light fitting fabricated out of GI tubing 32 mm dia, light grade,0.9 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 30 x 4 mm -02 Nos complete for fixing on wallincluding all fixing arrangements such as fastners, bilts, nuts, bolts washers etcincluding making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge |
| 145 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. |
| 146 | Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 8 way, 240 Volt incl fixing on suitable size of PVC rectangular plastic laminated sheet complete all as specified and directed. |
| 147 | Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 4 way 200 Amp rated busbarsingle pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 148 | Supply and fixing miniature circuit breaker (MCB) SPN 32 AMP, 240V, 10KA, \"C\" curvein the MCB DB complete with connection testing and commissioning as specified and directed. |
| 149 | Supply and fixing miniature circuit breaker (MCB) SP 5 To 32 AMP, 240V, 10KA, \"C\" curvein the MCB DB complete with connection testing and commissioning as specified and directed. |
| 150 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 151 | M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particalsin trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shallbe measured 18 cm after punning. |
| 152 | Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm,factory madeof specified make , complete all as specified and directed. |
| 153 | S&F in replacement of 1100 Volts grade heavy duty ISI marked cable XLPE insulatedmulti stranded aluminium conductor25 Smm 4 core. |
| 154 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) |
| 155 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 156 | Taking downUG cableof any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC. |
| 157 | Supply and fixing regal batten for LED Tube universal batten for G 13 T8 lamps including making electric connection from Ceiling Rose to tube light fitting including photon ultra plus LED tubelight 20W (single side connection) ultra bright LED Polycarbonate Tubelight with 10% THD with very high efficiency suited for installation in existing T8 Tubelight with G13 lamp holder to give glare free light with integrated electronic driver incl taking down old unsv one complete all as directed by Engr in Charge. |
| 158 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor 16 sq mm, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular incl taking down/ dismantling of old one complete all as specified and directed. |
| 159 | Supply and fix electric exahust fan suitable for operation on AC 230 volts 50HzRPM 1200, Copper winding of sweep 300mm having facility forincluding installation in position with necessary fixing clamp, studs, nut, bolts and washers and grouting in walls and cement work compite and making necessary arrangementand texting complete all as directed. Make:Bajaj/Havells/CT or equivalent in approved makes |
| 160 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm |
| 161 | Supply and fix electric operated storage water heater (Geyser)capacity 25 ltrs capacity vertical type 2KW suitable for operation on AC 230 volts having facility for inlet and outlet water supply connection, indication lamp Red and green with auto cut off system including installation in position with necessary fixing clamp, studs, nut, bolts and washers and grouting in walls and cement work compite and making necessary arrangement for inlet/outlet water supply connection for cold/hot water and texting complete all as directed. |
| 162 | Supplying & Fixing of CP metalic connection pipe, nylon thread reinforced 15 mm dia, 450 mm long with brass union at both ends for 15 mm dia pipe complete all as specified and as directed. |
| 163 | M&L for surface sub main wiringwith two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduitsize with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length. |
| 164 | S&F regel batten for LED Tube universal batten for G 13 T8 lamps including making electric connection from Ceiling Rose to tube light fitting including photon ultra plus LED Tubelight 20W (single side connection) Ultra bright LED Polycarbonate Tubelight with 10% THD with very high efficiency suited for installation in existing T8 Tubelight with G13 lamp holders to give glare free light with integrated electronic driver incl taking down old unsv one complete all as directed byEngr in Charge. |
| 165 | S&Fof 1100 Volts grade heavy duty ISI marked cable PVC insulatedmulti stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , ofsize 10 Smm 2 core. |
| 166 | S&F Bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by engr-in-charge. |
AI Tender Summary
Tender Timeline
Sep 10, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 25, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender