|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and directed. |
| 2 | Dismantling Fencing wire, Barbed any type, complete all as specified and directed |
| 3 | Demolition of Brickwork or stone/ boulder masonry or PCC Block, built in cement mortar including allquoins, arches, pillars, etc, including removal debries from the site complete all as as specified and directed. |
| 4 | Taking down cement plaster on brick or concrete surface including raking out joints, hacking for key, scrubbing down with water, etc. complete all as as specified and directed. |
| 5 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil, complete all as specified and directed. |
| 6 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft and loose soil, complete all as specified and directed. |
| 7 | M&L for plain cement concrete, type D-2, 1:4:8,(using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. |
| 8 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter(rough finish flat surface of concrete), complete all as specified and directed. |
| 9 | Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide rough finish flat surface of concrete), complete all as specified and directed. |
| 10 | M&L for formwork tosides of pillars, posts, struts, piers,columns and stanchions (rough finish surface of Square, Circular rectangular on plan or polygon ), complete all as specified and directed. |
| 11 | M&L for 10mm dia and over TMT bars cut to length bent to shape reqd including cranking ,bending spirally for hooping for columns, hooking bends including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 12 | M&L for TMT bars5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape reqd including cranking ,bending spirally for hooping for columns, hooking bends including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 13 | M&L for Reinforced cement concrete M25(Design Mix)using 20mm crushed stone aggregate as in Foundations, including rafts, footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 14 | M&L for Reinforced cement concrete M25(Design Mix)using 20mm crushed stone aggregate as inColumns,pillars, piers, posts and struts, complete all as specified and directed. |
| 15 | M&L for Reinforced cement concrete M25(Design Mix)using 20mm crushed stone aggregate beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. |
| 16 | M&L for Brick work with subclass \"B\" bricks, straight or curved on plan exc. 6.00 mtr mean radius, built in CM 1:6 complete all as specified and directed. |
| 17 | M&L for brick work with subclass \"B\" bricks, straight or curved on plan to any radius in half brick thickness wall, built in 1:4 -cement mortar complete all as specified and directed. |
| 18 | M&L for 15mm thick rendering in cement mortar (1:4) onstone masonry surfaces or surface other than fair face of brickwork finished even and smooth (without using extra cement) complete all as specified and directed. |
| 19 | M&L for 15mm thick rendering in cement mortar (1:4) onfair face of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 20 | M&L for mild steel work such as angle iron posts, struts, \"Y\" shaped angle in fencingincluding cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 21 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm andd not exc. 22.5cm long,complete all as specified and directed. |
| 22 | M&L for preparation of new or previously untreated Steel and ironsurfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 23 | M&L for preparation of new or previously untreated surface of walls and applying two coats of cement base paint white or tinted, complete all as specified and directed. |
| 24 | S&F Galvanised 2 strand, steel barbedwire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), ,complete all as specified and directed. |
| 25 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and as directed. |
| 26 | Removing excavated material exc 1.5km but not exc. 5km and depositing where directed, complete all as specified and as directed. |
| 27 | S&F Concertina coil fencing with punched tape of 900mm dia, centre core wire shall be minimum 2.5mm dia of mild steel wire confirming to IS 280-2006, Galvanised coating of steel concertina coil confirm to the requirements as laid down for medium coated wire in IS 4826, Hot dipped galvanised coating of round steel wires concertina coil shall be fixed in diamond shape with the help of dovetail two handle and spikeers shall be fixed at both end of coil, minimum straight length of the wire 150 RM of 10 RM of work, minimum weight 12.5 Kg for 10 RM complete all as specified and directed. |
| 28 | M&L for plain cement concrete, type B1, 1:2:4,(using 20mm graded crushed stone aggregate) for fixing of angke or post and clamps etc rate include for use of formwork(straight or curved) complete all as specified and directed. |
| 29 | M&L providing 100mm thick PCC 1:4:8 type D2, using 40mm graded aggregate as in subbasecomplete all as per specified and directed |
| 30 | M&Lfor 60mm thick, M-35 grade machine pressed precast concrete interlocking paver block (coloured tiles) in any shape and size as approved confirming to IS 15658-2006 complete all as specified and directed. |
| 31 | M&L for Preparation of new plastered surfaces of Wall and applying three coats of white wash complete all as specified and directed. |
| 32 | S&F PVC (SWR) 110 mm dia bore pipe single socketed, in any length with rubber ring joints , laid in trenches and floors complete all as specified and directed. |
| 33 | M&L for sand filling under floors or interlocking tiles including watering and consolidtion complete all as per specified and directed |
| 34 | Note: Schedule of Credit of Rs. 6,24,859.00 will be deducted from total quoted amount while calculating Contract sum. |
