Tender For Repair To Furniture / Furnishing At Technical Area, Timarpur, Delhi, delhi-Delhi

Repair To Furniture / Furnishing At Technical Area, Timarpur, Delhi -- 1 Building Including Internal Services (New Works) 2 M/L for repair of fully upholstered sofa including change of fabric, rubber cushion 100mm thick for seat & back having 75mm thick rubber cushion with ISI mark including 20mm thick U foam of 32 density, newar, spring and canvas lining of approved quality with necessary hardware & spirit polishing of wooden surfaces etc all complete as per direction of Engineer-In-Charge. 3 Sofa Single Seater 4 Sofa Two Seater 5 Sofa Three Seater 6 M/L for repair of wooden settee with back including changing of fabric, 50mm thick rubber cushion foam etc of approved quality including necessary hardware & spirit polishing of wooden surfaces etc all complete as per direction of Engineer-In-Charge. 7 Settee Single Seater 8 Settee Two Seater 9 Settee Three Seater 10 Settee Four Seater 11 M/L for repair of wooden settee without back including changing of fabric, 50mm thick rubber cushion foam etc of approved quality including necessary hardware & spirit polishing of wooden surfaces etc. all complete all as per direction of Engineer-In-Charge. 12 Single Seater 13 Settee Two Seater 14 Settee Three Seater 15 Settee Four Seater 16 M/L for repair of Sofa Easy Chair including change of Fabric, rubber cushion, foam etc. of approved colour, shade & quality including necessary hardware & spirit polishing on wooden surfaces etc. all complete. 17 M/L for repair of High back Revolving Chair upholstered with seat & back including change of Fabric, rubber cushion, foam etc. of approved colour, shade & quality with necessary hardware & painting with enamel paint etc. all complete all as per direction of engineer-in-charge. 18 M/L for repair of Medium back Revolving Chair upholstered with seat & back including change of Fabric, rubber cushion, foam etc. of approved colour, shade & quality with necessary hardware & painting with enamel paint etc. all complete all as per direction of engineer-in-charge. 19 M/L for repair of Low back Revolving Chair upholstered with seat & back including change of Fabric, rubber cushion, foam etc. of approved colour, shade & quality with necessary hardware & painting with enamel paint etc. all complete all as per direction of engineer-in-charge. 20 M/L for repair of Computer Revolving Chair upholstered with seat & back including change of Fabric, rubber cushion, foam etc. of approved colour, shade & painting with enamel paint etc. all complete all as per direction of engineer-in-charge. 21 M/L for repair of wooden Cushioned Chair (Visitor/Study/Dinning) including change of Fabric, rubber cushion, foam etc. of approved colour, shade & quality including necessary hardware & spirit polishing on wooden surfaces etc. all complete all as per direction of engineer-in-charge. 22 M/L for P/F ofMoulded Ply 12 mm thick for chair seat & back etc. all complete all as per direction of engineer-in-charge. 23 M/L for P/F of PU Arm of revolving chair with necessary hardware etc. all complete all as per direction of engineer-in-charge. 24 M/L for repair of any type of chair with welding work such as welding of broken pedestal, base, central lever, legs, arms, and painting to match the existing finish etc. all complete all as per direction of engineer-in-charge. 25 M/L for repair of Dressing Stool including change of Fabric, rubber cushion, foam etc. of approved colour, shade & quality including necessary hardware etc. all complete. 26 M/L for repair of cane chair including replacement of seat & back caning and spirit polishing on wooden surfaces and painting with enamel paint as required etc. all complete all as per direction of engineer-in-charge. 27 M/L for taking out damaged wheels of revolving chairs and providing & fixing new wheels of approved quality & size i/c necessary hardware etc. all complete all as per direction of engineer-in-charge. 28 M/L for repolishing of old furniture items with spirit polish including minor touch up to achieve desired finish etc. all complete all as per direction of engineer-in-charge. 29 M/L for minor repairs of tables including change of sunmica top of approved colour & quality etc. all complete all as per direction of engineer-in-charge. 30 M/L for chage of laminated top of approved colour & quality of tables etc. all complete all as per direction of engineer-in-charge. 31 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make of approved quality):- 32 40 mm 33 50 mm 34 65 mm 35 75 mm 36 Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality). 37 Providing and fixing bright finished brass handles with screws etc complete. 38 125 mm 39 100 mm 40 75 mm 41 M/L for replacement of wooden knobs of drawers of tables with necessary hardwares etc. all complete all as per direction of engineer-in-charge. 42 M/L for supply of 5 mm thick glass on table top all as per direction of engineer-in-charge 43 M/L for S/F of 4 mm thick looking mirror in dressing table all as per direction of engineer-in-charge 44 M/L for S/F of 3 mm thick looking mirror in hat and cane stand all as per direction of engineer-in-charge 45 M/L for S/F of Brass ped of approved quality with necessary screws in hat and cane stand etc. all complete all as per direction of engineer-in-charge 46 M/L for painting with enamel paints to steel Almirah (Large) etc all complete all as per direction of engineer-in-charge 47 M/L for painting with enamel paints to steel Almirah (Small) etc all complete all as per direction of engineer-in-charge 48 M/L for taking out old/unserviceable lock of steel Almirah and P/F new lock of approved make for steel Almirah etc all complete all as per direction of engineer-in-charge 49 M/L for making pair of New Keys for locks of steel Almirah etc. all as per direction of engineer-in-charge. 50 M/L for taking out old/unservicable handle of steel Almirah and P/F new handle of approved make for steel Almirah etc all complete all as per direction of engineer-in-charge 51 M/L for taking out old damaged shelves of steel almirah and P/F new shelves of approved size and quality etc. all complete all as per direction of engineer-in-charge. 52 M/L for taking out old damaged leg of steel almirah and P/F new legs of approved size and quality etc. all complete all as per direction of engineer-in-charge 53 M/L for painting with enamel paints to steel file rack of size 700 x 475 x 1380 mm etc all complete all as per direction of engineer-in-charge 54 M/L for P/F of 6 mm thick high density foam of approved quality below the loop pile carpet etc. all complete all as per direction of engineer-in-charge 55 M/L for replacement of damaged carpet and providing & laying loop pile Synthetic carpet of approved make and quality on prepared surfaces with approved synthetic adhesive etc. all complete all as per direction of engineer-in-charge. Credit for Old/ retrieved materials shall be considered which shall become contractor’s property. 56 M/L for Dry cleaning of Carpet by vacuum cleaner using approved chemical/detergent etc. all complete all as per direction of Engineer-in-Charge 57 M/L for Dry cleaning by vacuum cleaner using approved chemical/detergent etc. all complete all as per direction of Engineer-in-Charge for the following items:- 58 Sofa Single Seater 59 Sofa Two Seater 60 Sofa Three Seater 61 Chairs 62 Repair of work Station including change of channels, Handles including the screw etc. Complete. 63 Repair of conference table including change of moulding replacing 4 mm veenex on the top, 2 coats melamine polish for 8 sector. 64 Repair of conference table including change of moulding replacing 4 mm veenex on the top, 2 coats melamine polish for 11 sector. 65 Repair of conference table including change of moulding replacing 4 mm veenex on the top, 2 coats melamine polish for 14 sector. 66 Material and labour for taking out of old damaged shokers of reolving chairs including replacing the new shokers of approved quality and size including necessary hardware etc all complete as per direction of Engineer-in-charg. 67 Replacement of chair base made of nylon PVC base 600 mm size having 5 nos. of branches of best quality including labour and material etc all complete to the approval of Engineer-in-charge. => Limited

Refer document

INR 53000.0 /-

INR 26.45 Lakhs /-