Tender For Stmc For Maintenance Of Nh 752 I Charthana To Jintur Section Km 25/100 To Km 47/100 And Repairing Of Mnb In The State Of Maharashtra
Tender Value
4.04 Crore
Estimated cost
Bid Submission
01 Oct 2024
0 days left
EMD
4.05 Lakhs
Bank guarantee accepted
Document Fee
720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jintur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Stmc For Maintenance Of Nh 752 I Charthana To Jintur Section Km 25/100 To Km 47/100 And Repairing Of Mnb In The State Of Maharashtra
BOQ
| Sl. No. | Item Description |
| 1 | ITEM No. 01:- DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. |
| 2 | ITEM No. 02 :-BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compactionfor 50 mm compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 3 | Item No 03:-Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 4 | ITEM NO 04:- Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 5 | ITEM NO 05:- Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat\"s Eyemade of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer.The contractor shall submit a two year warrantyfor satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. |
| 6 | ITEM NO 06 :-Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). |
| 7 | ITEM NO 07 :-Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including hand packing filling gravel / sand in the voids etc. complete. |
| 8 | ITEM NO 08:- Providing & laying in situ cement concrete of M 10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work compacting and curing etc. complete. with reversible Drum Type mixer with SCADA. |
| 9 | ITEM NO 09:- Providing and laying in situ / ready mix controlled grade of M20 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer)with fine agreegates of required specifications ( VSI sand finely washed etc ), excluding reinforcement) |
| 10 | ITEM NO 10:- Providing, cutting, bending, hooking, tyingand laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 11 | ITEM NO 11 :- Providing and applying white -wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. |
| 12 | ITEM NO 12 :- Providingandapplying2Coatsof100%Pureacrylicwaterbasedpaintwithspecialheat reflectance property to withstand the harsh climate for period of atleast 10 years of approved make.PaintsystemshouldprovidedurableandlonglastingfinishwithDFTofmin90 microns and should protect against concrete carbonation with R value of minimum 600 and equivalentconcretelayerthicknessvalueofmin150cm.Paintshouldhavebreathability property and should be able to cover hairline cracks in the surface upto 0.5mm The paint has to be applied on a coat of high quality acrylic copolymer based alkali resistant primer with excellentpenetratingpropertiesincludingcleaning,withallleadsandliftsatalllevelsetc complete, as directed by Engineer in charge. |
| 13 | ITEM NO 13 :- Providing andfixing Mandatory/Regulatorysignboardsincircularshape of 900 mm diamade outof 4mm aluminum sheet bondedwithwhite retro reflective sheeting ofClass B ( Type IV Highintensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. ofM. S. angle iron post of size65 mm X 65 mm X 6 mm, 3.45 m long,duly paintedwithwith flat oil paint having alternate black and white bands of 25 cm width including G.I.fixturesetc;fixingtheboardsinM25gradeconcreteblockofsize60cm X60cm X75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7yearswrittenwarranty fromthemanufacturerandauthoriseddistributor/convertorissuedforfield performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film |
| 14 | ITEM NO 14:- Providing and fixing informatory sign boards in rectangular shape of size 1.20m x 0.90m made out of 3mm Aluminum composite panel bonded with IRC Specified colour ofretro reflective sheeting of Type IV High IntensityMicro-PrismaticGradeSheeting(HIP)havingpressuresensitive/heatactivatedadhesive,IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background including M. S. angle iron frame of size 35 mm X 35 mm X 3 mm & two M.S. angle iron post of size65 mm X 65 mm X 6 mm, 3.65 m long,duly paintedwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M-20 concreteblockofsize60cmX60cmX75cmincludingtransportationetc;complete. Aluminum composite panel Type IV High Intensity. |
| 15 | ITEM NO 15:- Providing andfixing of retro- reflectorised informatory sign boardrectangular/Square in shape having area less than 0.9 square meter made out of mm aluminum sheet bonded with white retro reflective sheeting of Class (TypeIVHighintensitymicro-prismaticgradesheeting-HIP)havingpressuresensitive/heat activatedadhesiveretoreflective specifiedbackground,borderandbacksideretoreflctive symbols,letters, numerals, arrow as per IRC:67-2012Table No 8.3, supported withback supportframe 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angleironpost75mmx75mmx6mm,3.5mtlongfirmlyfixedtothegroundbymeansofproperly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron postshall be duly painted with one coat of epoxy primer and two coats ofepoxyfinishpaintshavingalternateblackandwhitebandsof25cmwidthincludingGIfixuresand transportation etc.complete. |
AI Tender Summary
Tender Timeline
Sep 09, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 03, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender