|
| 1 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required. |
| 2 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 3 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 X 2.5 sqmm |
| 4 | Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providingand fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 5 | Supply and fixing of 200A, 415 V operational voltage, 50 Hz , 4 Way, Wall Mounted Busbar Chamber having minimum size of 600 X 600 X 150 mm3 suitable for connection of 3 phase,4 Core Aluminium Armoured Cable as required along with provision for installation of 100 A MCCB- 1no, and 63 A TPN MCB- 4 Nos. on DIN rails inside the busbar chamber having removable gland plate with knock out provision and Liberal space between cable / busbar and live parts, fabricated using sheet steel (CRCA) and epoxy powder coated to give superior & lasting finish, manufacturedby CPRI approved manufacturer. |
| 6 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A,30KA,FPMCCB |
| 7 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way (4 + 12), Double door |
| 8 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 9 | Single Pole |
| 10 | Double Pole |
| 11 | Triple pole and neutral |
| 12 | Supply of Outdoor aesthetically designed 45 wattLED Street Light Luminare with single piece die cast aluminium housing, LED\"s mounted on high quality metal core PCB,Secondary lenswith extremely precision designed heat sink suitable for top open for easy maintenance, complete with IP66 protection Class, with polycarbonate cover .The fixture should be suitable for pole/ bracket mounting , manufactured by certified inhouse- NABL manufacturer.Efficacy > 110 Lumens/ W with 10 KV SPD. |
| 13 | Supply & fixing of 150 watt LED Flood light luminaries of Area lighting with energy saving Main Housing,Powder coatedpressure dia cast aluminium housing,, Front Clear toughened glass, Suitable secondary lens for better light distribution Gear : Electronic constant current driver of min. OperatingVoltage : 140 V - 270 V, Rated Voltage & Frequency : 240 V, 50 Hz, AC with IP 66 protection, manufactured by certified inhouse- NABL manufacturer.Efficacy > 110 Lumens/ W with 10 KV SPD. |
| 14 | Supply of 36 Watt LED recessed, 2\" x 2\" (600 mm x 600 mm) luminaire, glare free illumination, seamless front frame with flat white high transmission acrylic cover with CRCA sheet metal body powder coated in white,manufactured by certified inhouse- NABL manufacturer.Efficacy > 100Lumens/ W |
| 15 | Supply of 18/20/22 Watt LED of retro fitT8 LED polycarbonate T8 tube with in build driver with metal heat sink , corrosion resistant, impact proof, surface mounting IP65 luminaire,manufactured by certified inhouse- NABL manufacturer.Efficacy > 100Lumens/ W |
| 16 | Supply of Box type industrial channel with provision for conduit entry made of CRCA steel housing suitable for T-8 LED rod (1x 20/22 watt) Item should be BIS registered ( with batch tested and certified by NABL accredited lab as in case required by Engineer-in-charge). |
| 17 | Installation, testing and commissioning of all types lighting fixtures, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (including making necessary arrangement for installation in existing street light brackets ) |
| 18 | Supply of 300 mm sweep medium duty exhaust fan with louvers ,1400 RPM,with suitable size of clamps for fixing arrangements and accessories etc. as required. |
| 19 | Installation of exhaust fan upto 405 mm sweep in the existing opening/suitable opening to be made, including making good the damage, connection, testing, commissioning etc. as required. |
| 20 | Supplying and fixing of out door type loop in loop out cable junction box fabricated from 1.6 mm MS sheet enclosed wheather proof, dust proof, water proof and locking arrangement internally embedded gasket with bottom cable entry plat through cable glands fixed with clamps on steel structure and wall. Seperate for incoming and out goingcables and wires duly fitted with following in it.HD Connector for 10 to 16 sqmm-4 Nos.6 amp SP \"C\" curve 10 KA MCB-1 No.fixing Clamps-2 Nos. |
| 21 | Supplying, installation, testing and commissioningof single phase, 230 VAC ±10%, 50HZ, : 6A / 10A / 25A capacity, Auto Photo Panel with Photo Cell Sensor with powder coated sheet metal enclosure , IP protection suitable for outdoor applications. |
| 22 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 23 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 24 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 25 | Supplying of XLPE insulated & PVC sheathed aluminium conductor armoured cable of 1.1 KV grade of size 3.5 X 35 sqmm, confirming to IS:7098 (Part- I) 1988 with up to date ammendmentas required. |
| 26 | Supplying of XLPE insulated & PVC sheathed aluminium conductor armoured cable of 1.1 KV grade of size 2 X 10 sqmm, confirming to IS:7098 (Part- I) 1988 with up to date ammendmentas required. |
| 27 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size up to 35 sqmm on wall surface as required. (Clamped with 1 mm thick saddle) |
| 28 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 29 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. 100 mm dia |
| 30 | Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. |
| 31 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm |
| 32 | Supplying and making end termination with brass compression gland and aluminium lugs for 2 X 10 sq. mm (19 mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 33 | Supplying and making end termination with brass compression gland and aluminium lugs for 4X 16 sq. mm (28 mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 34 | Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 X 35 sq. mm (32 mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 35 | CREDIT TO ESTIMATE |
| 36 | Like wire pices, cable pices, lighting fixtures ,old street light fittings , old floodlight fixtures, loop boxes, ceiling fans, feeder pillar, cubical panel, all electricals materials etc. |
| 37 | Dismantled MS Poles |
