|
| 1 | Procurement Of Plates, Guide Piece,Shaft, Support Etc., For The Use Of Track Machines. |
| 2 | GUIDE BUSH, As Per Plasser Part No.UD 252-23A, Make;Plasser OMC Or Its equivalent Indian Make/Brand ] |
| 3 | FLANGE as per plasser part no :MSW 100.1201.04.44, make :Plasser or its equivalent indian make/brand ] |
| 4 | PRESSURE HEAD, As Per Plasser Part No.UD 80-51, Make:Plasser OMC or its equivalent Indian Make/Brand ] |
| 5 | RING GEAR /DRIVE CROWN WHEEL [CROWN WHEEL AND PINION], As Per Plasser Part No.UD 64-1355Z/UD64.54Z, Make: Plasser IMP or its equivalent Indian Make/Brand ]Page 1 of 11 Run Date/Time: 09/09/2024 10:33:50STORES/SOUTH CENTRAL RLYTENDER DOCUMENT |
| 6 | BASE PLATE, As per plasser part no. UD103.13 Make: Plasser IMP or its equivalent indian make/brand ] |
| 7 | SCREEN FLOOR SET [SET OF SCREENS FOR BCM & FRM], As Per Plasser Part No.64-09-5000-103, Material Specification ISO2062-2011 with amendment No.01-2012, Gr.E250A , Mild Steel. One set of screen floor consists of following items. 1st Deck: Screen floor-64.09.5545 MW/80/H15-650X1215 2 Nos. Screen floor-64.09.5547 MW/80/H15-650X1050 4 Nos. Screen floor-64.09.5548 MW/80/H15-670X1050 2 Nos. Screen floor-64.09.5546 MW/80/H15-670X1095 1 Nos. 2nd Deck: Screen floor-64.09.5562 MW/50/H10-650X1215 1 Nos. Screen floor64.09.5563 MW/50/H10-650X1215 1 Nos. Screen floor-64.09.5564 MW/50/H10-281X670 1 Nos. Screen floor64.09.5565 MW/50/H10-670X938 1 Nos. Screen floor-64.09.5554 MW/50/H10-650X1050 4 Nos. Screen floor64.09.5555 MW/50/H10-670X1050 2 Nos. 3rd Deck: Screen floor-64.09.5556 MW/32/H8-650X1090 1 Nos. Screen floor-64.09.5557 MW/32/H8-650X1090 1 Nos. Screen floor-64.09.5558 MW/32/H8-670X1090 1 Nos. Screen floor64.09.5567 MW/32/H8-641X1050 4 Nos. Screen floor-64.09.5566 MW/32/H8-670X1050 2 Nos. Rod Woven Type Make:Plasser or Its equivalent Indian Make/Brand ]Dy.CE/CPOH/TM/RAYANAPADU, Andhra Pradesh 10.00 Set |
| 8 | DRVING SHAFT, AS PER PLASSER PART NO:- 62.08.3068, Make : Plasser IMP or its equivalent indian make/brand ] |
| 9 | SLIDE PLATE, AS PER PLASSER PART NO. UD67.2105 LI , Make: Plasser or its equivalent indian make/brand ] |
| 10 | SLIDE PLATE, As per Plasser Part no. UD67.210 RE ,Make: Plasser or its equivalent indian make/brand ] |
| 11 | SWEEP BRUSH, As Per Plasser Part No.33x55x300MM-LG, Make: Plasser IND or its equivalent Indian make/Brand . ] |
| 12 | CHUTE, As Per Plasser Part No. 64.09.1000.96, Make:Plasser OMC or its equivalent Make/Brand] |
| 13 | NUT as per Plasser Part No.64.09.7156 and Sub Part no. 62.09.1017 Make :- Plasser IND or Equivalent ] |
| 14 | DREDGER STATION, As Per Plasser Part No.64.11.3000.39, Make: Plasser OMC or its equivalent Indian make/Brand ] |
| 15 | CUTTER BAR(NEW MODEL) AS PER PLASSER Part No.RM 08.25.2150.01(2150mm length) Make:AMIT,ANBRO,VIKRANTH,PLASSER INDIA OR ITS EQUIVALENT INDIAN MAKE/BRAND ] |
| 16 | FIXING PIN as per Plasser Part no.: 8X40DIN1481, Make : Plasser IND or its equivalent ] |
| 17 | GUIDE PIECE Plasser Pt.No.UD313.1002LI, Make: PLASSER IMP OR Its equivalent indian make/brand ] |
| 18 | GUIDE PIECE , As per plasser Pt.No.UD313.1002RE. Make: PLASSER IMP OR Its equivalent indian make/brand ] |
| 19 | SHAFT , As per Plasser part no. UD61.7872, Make: Plasser IND or its equivalent indian make/brand ] |
| 20 | UNIT Stablizer,AS PER PLASSER PART NO. UD313.3850, Make : PLASSER IMP or its equivalent indian make/brand ]Page 3 of 11 Run Date/Time: 09/09/2024 10:33:50STORES/SOUTH CENTRAL RLYTENDER DOCUMENT |
| 21 | COVER, As Per Plasser Part No.DL 10-56, Make:Plasser OMC or its equivalent Indian Make/Brand ] |
| 22 | PIVOT , AS PER PLASSER Part No:UD61.31 Make:PLASSER IMP or its equivalent indian make/brand ] |
| 23 | SUPPORT WITH OUT BEARING AS PER PLASSER, Pt. No. RE11.09.1105, ACCEPTABLE MAKE PLASSER IMP OR EQUIVALENT. ] |
| 24 | SUPPORT COMPLETE WITH BEARING AS PER PLASSER, Pt. No. RE11.09.1106, ACCEPTABLE MAKE: PLASSER IMP OR EQUIVALENT. ] |
| 25 | SUPPORT WITH OUT BEARING AS PER PLASSER PART NO: SU1600.509.1.5 FOR HOBCM,ACCEPTABLE MAKE: PLASSER IMP OR EQUIVALENT. ] |
| 26 | SUPPORT WITH BEARING AS PER PLASSER Pt.No. SU1600.509.1.6, ACCEPTABLE MAKE: PLASSER IMP OR EQUIVALENT ] |
