|
| 1 | Taking down PVC pipes of any description any pattern incl all fittings heads, shoes bends etc complete all as specified and as directed |
| 2 | S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed |
| 3 | S&F PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed |
| 4 | S&F PVC (SWR) bends 110mm dia any radius complete all as specified and as directed |
| 5 | S&F PVC (SWR) bends 75mm dia any radius complete all as specified and as directed |
| 6 | S&F PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed |
| 7 | S&F PVC (SWR) bends 75mm dia any radius with access door complete all as specified and as directed |
| 8 | S&F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed |
| 9 | S&F PVC (SWR) vent cowl 75mm dia complete all as specified and as directed |
| 10 | M & L for25 mm average thick PCC (1:2:4) Type B0 by using12.50 mm graded stone aggregate as in roofwhere required over slabsand finishing the exposed surfaces faireven without using extra cement complete all as specified and as directed |
| 11 | M & L 10mm thick rendering in CM 1:4 using water proofing compound at the rate of 3% weight of cement over concrete surfacescomplete all as specified and as directed( Note : WPC measured and paid separately) |
| 12 | M&L priming the plastered roof surfaces with bitumenous primer @ 0.30 Kg per sqm and applying APP based polymeric membrane minimum weighing 3 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) and on primed surface by forced applicationover apply bitumen base aluminium paint@ 0.20 Kg/Sqm complete all as specified and as directed |
| 13 | Supply only water proofing compound complete all as specified and as directed |
| 14 | Demolition of cement concrete in roofs, floors (other than ground floor), beams, staircases, landing, chajjas and similar suspended work and removing debris to a distance of n.exc 100M away from the bldg complete all as specified and as directed. |
| 15 | S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPAasin roof covering/cladding to wall fixed with self tapping screws as specified. |
| 16 | S&F pre painted gal valume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour haing tensile strenghth of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified |
| 17 | Dismantlingframed wooden purlin/Rafterwork of any descriptionsectional area exc 40 Sqcm not other wise provided for, complete all as specified and as directed |
| 18 | S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A. complete all as specified and as directed. |
| 19 | M & Lproviding cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed. |
| 20 | M&L Preparatioin of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat primer. complete all as specified and as directed |
| 21 | M&L Preparatioin of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paintcomplete all as specified and as directed |
| 22 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etccomplete all as specified and as directed |
| 23 | M & L for brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 completeall as specified and as directed. |
| 24 | Taking down plastering on brick walls etc including racking out joints, hacking for key, scrabing down with water etc.complete all as specified and as directed |
| 25 | M & L for 15 mm thick rendering in Cement Mortar 1:4 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cementincl scaffolding if necessary complete all as specified and as directed. |
| 26 | M & L for 15 mm thick rendering in Cement Mortar 1:6 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and as directed |
| 27 | M&L for twocoats of cement base paint over a coat of primeron new surfaces of wallincluding preperationcomplete all as specified and as directed. |
| 28 | M&L for two coats of OBD over a coat of primer including preparation of new plastered surfaces of walls complete all as specified and as directed |
| 29 | M&LPreparation of plastered or unplastered old decorated surfaces and applying two coats of oil bound distemper on walls. complete all as specified and as directed |
| 30 | M&LPreparation of plastered or unplastered old decorated surfaces and applying two coats of cement base paint on walls. complete all as specified and as directed |
| 31 | Taking down chowkat with frame (without taking off shutter from the frame) n exc 1.50 Sqm each complete all as specified and as directed |
| 32 | All as per item No 31 above but areaexc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed |
| 33 | Taking down shutter of any description exc 1 Sqm & n exc 2 Sqm each complete all as specified and as directed |
| 34 | M & L for 2nd classhard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed |
| 35 | S&F for 35mm thick factory made plain framed paneled shutter of 2nd class HW (any Number of panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm th venered particle board with veneering on both face kiln seasoned & chemically treated complete all as specified and as directed |
| 36 | M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing complete all as specified and as directed |
| 37 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top and bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement as per specification and drawing as per SSR Pt I complete all as specified and as directed |
| 38 | S & F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed |
| 39 | S & F Aluminium handle 150mm fabricated type complete all as specified and as directed |
| 40 | S & FAluminium anodised barrel tower bolts 150mmof extrded section complete all as specified and as directed |
| 41 | S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed |
| 42 | S & F in repairs 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed |
| 43 | S & F in repairs Aluminium handle 150mm fabricated type complete all as specified and as directed |
| 44 | S & F in repairs Aluminium anodised barrel tower bolts 150mmof extrded section complete all as specified and as directed |
| 45 | S & F 3mm th figured glass ordinary quality and fixed with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and as directed |
| 46 | M & L for preparation of new wooden surface and applying 2 coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth complete all as specified and as directed |
| 47 | M & L for preparation of old wooden surface and applying 2 coats of synthetic enamel paint over 10cm width or girth complete all as specified and as directed |
| 48 | S & F galvanized mild steel wire cloth 0.56mm nominal dia of wire with avg 1.18mm width of aperture and fixed with tinned tacks. complete all as specified and as directed |
| 49 | Demolition of cement concrete(unreinforced) in ground floors and pavingnexc 15 cm thickness (below and above ground level) complete all as specified and as directed |
| 50 | M&L cement concrete 40mm thick type B- 1, 1:2:4 (20mm graded agg) as in floor finishing cement concrete surface even and smoothwithout using extra cement complete all as specified and as directed |
| 51 | M & L 75mm thickPCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 52 | M & L75 mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed |
| 53 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and as directed |
| 54 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified and as directed |
| 55 | M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed |
| 56 | M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exc 0.06 and not exceeding 0.11 Sqmin floors surface set and jointed in neat cement slurry and pointed with whiteor colour cement to matchover and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed |
| 57 | S&F rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed |
| 58 | S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and as directed |
| 59 | S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as specified and as directed |
| 60 | S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors includingtaking down complete all as specified and as directed |
| 61 | S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors includingtaking down complete all as specified and as directed |
| 62 | S&F in repairs 15mm bore Bib taps standard of PTMT any colour high pressure scred for iron pipe. Min wt 90 gms complete all as specified and as directed |
| 63 | S&F in repairs 15mm bore stop cock, PTMT of any colour high pressure scred for iron pipe Min wt 90 gms complete all as specified and as directed |
| 64 | S&F in repairs 15mm bore concealed type stop cock, PTMT of any colour high pressure scred for iron pipe Min wt 110 gms complete all as specified and as directed |
| 65 | S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. Min wt 40 gms complete all as specified & directed |
| 66 | M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repairs complete all as specified and as directed |
| 67 | M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified and as directed |
| 68 | S&Fin repairWHB vitreous china (flat back or angle back type ) ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection, wastepipe and CP piller tap complete all as specified and as directed |
| 69 | S & F Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with 60 mm long brass screws, pointing around urinal back in cement, including all fittings cistern, brackets, flush pipe, spreader, push tap, waste coupling, grating, etc Complete set incl all fitting & fixtures complete all as specified and as directed |
| 70 | S&F Vitreous china urinal partition white of size 310x700 mm terminating about 40 cm above floor line complete all as specified and as directed |
| 71 | S & F in repair Vitreous china Squatting panOrissa pattern of size 580mx440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and as directed |
| 72 | S&F in repairs wash down water closet (pedestal pattern) complete white withplastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and as directed |
| 73 | S & F in repairPVC valveless syphonic action type low levelflushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia complete all as specified and as directed |
| 74 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed |
| 75 | S&F in repair 600mmx450mm belvelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with pvc / alluminium frame and fixed to wooden plugs with chromum plated brass screws cup washers. complete all as specified and as directed |
| 76 | Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in hard/dense soil complete all as specified and as directed. |
| 77 | Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.. |
| 78 | Removing the excavated soil to a distanceexc 250.0 m and n.exc 500 .0m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.. |
| 79 | Demolition and breaking up drain pipes(salt glazed ware,AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and as directed for 150mm dia pipe complete all as specified and as directed. . |
| 80 | Description all as per item No 79 here-in-above but 200 mm dia pipe. complete all as specified and as directed |
| 81 | M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2150mm dia drain pipecomplete all as specified and as directed. |
| 82 | M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 200 mm dia drain pipecomplete all as specified and as directed. |
| 83 | M&L for SWG drain pipe grade \"A\" of150 mm internal dia laid in trenches and jointedin cement mortar 1:1 complete all as specified and as directed |
| 84 | M&L for SWG drain pipe grade \"A\" of200 mm internal dia laid in trenches and jointedin cement mortar 1:1 complete all as specified and as directed |
| 85 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting ou existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia SWG pipe complete all as specified and as directed. |
| 86 | Description All as per item No 85 here-in-above but 200 mm dia complete all as specified and as directed |
| 87 | Demolition of reinforced cement concrete of any description and in any position, not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) |
| 88 | M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified and as directed.Note:- Reinforcement will be measured and paid seperatel |
| 89 | S/F MS TMT bars 10 mmdia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed |
| 90 | M&L for cement concrete in foundation filling and mass concrete type D2 1:4:8 (40mm graded aggregate) complete all as specified and as directed.. |
| 91 | Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit includingremovalof batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed |
| 92 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed |
| 93 | M & L for Concealed Conduit Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for:(a) One light point controlled by one, one way switch 5A, SP |
| 94 | (b) One ceiling / exhaust fan point controlled by one, one way switch complete all as specified and as directed |
| 95 | (c)One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same boardcomplete all as specified and as directed |
| 96 | (d) One 3 Pin 5 Amps switch socket Independt board complete all as specified and as directed |
| 97 | Description all as per item No 3 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 98 | S & F Switch pianotype single pole one way flush type 5 Amps capacity 230 volts complete all as specified and as directed |
| 99 | Supply and fix switch socket combination flush type multipurpose 2/3 pin5 Amps, 230 Volts complete all as specified and as directed |
| 100 | Supply and fix socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts complete all as specified and as directed |
| 101 | Supply and fix switch socket combination flush type multipurpose 5 in 1,5/16 Amps, 230 Volts complete all as specified and as directed |
| 102 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed |
| 103 | S and F sheet metal enclosure MCBDB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed |
| 104 | S & F MCB SP230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specifiedand directed |
| 105 | S & F MCB SPN230Vsuitable for fixing on MCB DB of capacity 63 Amps complete all as specified and as directed |
| 106 | S & F wall mounted box type LED of 18/22 watt with LED Lamp,with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete and as directed |
| 107 | S & F wall mounted LED batten of 09 watt with LED Lamp,complete all as specified and as directed |
| 108 | Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts,check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe med grade 15mm bore from earth elelctrode to test pointincl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipemed grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade. |
| 109 | Supply & fix Exhaustfan of metal body450 mm sweep with metallic louver includingconnecting up ofPVC insulated copper conductor multi stranded cable of suitable size as recommended by the manufacturer from ceiling rose to connector complete including provision of HDPE high grade plastic net 800 GSM,hole size one inch,thickness 3mm green colour on the outside wallcomplete all as specified and as directed. |
| 110 | M&L for cutting of wall in round shape irrespective of height of building using machine cutting only and making opening suitable for mounting of 450 mm dia exhaust fan and making good disturbed surfacesmatching with existing colour including grouting of nuts and bolts and clearing the debris and making the work area clean complete all as specified and as directed.Note: Contractor to check the site requirement. |
| 111 | Disconnecting and removing Exhaust fanof 300 mm sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine and rewinding of the exhaust fan with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer\"s design and instructions including varnishing for exhaust fan complete including replacement of worn out/defective parts , lubricating with approved lubricants, reassembling and refixing in original position with provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of exhaust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed |
| 112 | S & F Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box bracket made out of GI pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and as directed by Engg-in-Charge. |
| 113 | M & L Submain wiring with 2 runs of single core 4 Sqmm PVC insulated unsheathed, FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including PVC Casing-Capping of suitable size and its accessories ISI marked including one run of single core 4 sqmm PVC insulatedunsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring complete all as specified and as directed |
| 114 | S & F Double pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Ampscomplete all as specified and as directed |
| 115 | S & F Vertical mounted electric water heater, storage type with heating element upto 2 KW capacity 25 litre, BEE 5 stars rated complete with all accessories such as safety valve, vaccum and pressure release valve and snap action thermostst , thermal cutout , non return devices, 240 volts with plug top, confirming to IS complete all as specified and as directed by Engineer in Charge.Note :- (1)Fixing of Geyser on wall at suitable height as diredted at site with anchor fastener-04 Nos after drilling is deemed to be included in the quoted rate by the contractor.(2) Cost of 02 Nos PVC Connection pipe 15 mm dia and 450 mm long is included in the quoted rate. |
| 116 | Supply and laying steel water tubing, medium grade, galvanised of size 15 mm bore , ISI marked including all ISI marked fittings such as tees, bends, elbow, reducers, unions etc fixed complete to walls and ceilings or laid in floors complete including making cold water connection from existing GI pipe complete all as specified and as directed |
| 117 | Supply and fix Angle stop valve, fency type Chromium platedany colour high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed/PVC connection pipe of dia 15 mm and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed |
| 118 | S &F Bib taps chromium plated with crutch or butter fly handle 15 mm dia screwed for iron pipe or for brass ferrule and fixed including cutting of GI pipecomplete all as specified and as directed. |
| 119 | S& F Switch piano, flush type single pole, one way 16 Amp mongunted on PVC gang box of suitable size on wall complete all as specified and as directed |
| 120 | Supply and fix Refrigerator, electric driven (single phase), capacity more than 300/310 Ltrs. BEE 3 star rated, Double door complete with attachements complete all as specified and as directed Make :- Samsung, LG, Kalvinator, Lloyd |
| 121 | S & F PVC stand suitable for mounting 300 Ltrs Refrigerator complete all as specified and as directed |
| 122 | M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including newPVC casing caping, ISI marked of suitable size, including provision of PVC gang box suitable for one 5 amp switch fixed to wall adjacent to eisting switch board and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour from common earth dolly to ceiling rose complete all as specified and as directed for one Exhaust Fan point controlled by one switch.Note: The wiring shall be done in proper color coding using red, yellow, blue for phases,black for neutral and green for earth. |
| 123 | S & Fswitch piano single pole flush type 5 amps, 230 volts mounted on PVC Gang box 1 way fixed on wall near existing switch board complete all as specified and as directed |
| 124 | S & FCeiling Rose three terminal, PVC/Polycarbonate, isolated body complete all as specified and as directed. |
| 125 | Supply & fix Exhaustfan metal body with louvers of 225mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector complete all as specified and as directedMake :- Havells, Crompton, Bajaj. |
| 126 | M&L for cutting of wall in round shapeusing machine cutting only and making opening at any height and at any floor of the building for fixing of suitable dia pre-moulded PVC tail piece of required length for mounting of 225 mm dia mettalic exhaust fan includingwire mesh and making good the disturbed surfaces matching with existing colour, plastering, and clearing all debris and making the work area clean complete all as specified and as directed at site..Note :- (a)The quoted rate includesfor all/any number of openings required at any place for proper ventilation of the site.(b) Cost of making arrangement for cuting hole at any floor of the building is included in the quoted rate by the tenderer. |
| 127 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2 TR.Make :- Carrier, Voltas, LGNote :- (1) Ready made metal stand for mounting Out door unit on wall including its fixing arrangement for each AC unit is deemed to be included in the quoted rate by the contractor.(2)PVC insulated copper wite 3 core 2.5 Sqmm for required length is included in the quoted rate.(3)Cost of charging refrigerent gas at requited pressure is include in the quoted rate.(4)Required number of battery for Remote control is included in the quoted ate.(5)Writing MES/SM No. on Indoor & Out door unit with black colour permanent marker is included in the quoted rate. |
| 128 | S & F Voltage stabilizer for automatic operation, single phase, neturally air cooled type indoor wall mounted type and designed for input voltage between 170 volts to 250 volts with output voltage stabalized at 230 volts with accurecy of ± 2.5 volts and of capacity 4.0 KVA. complete all as specified and as directedMake :- Voltas, Microtech, V-Guard. |
| 129 | M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including PVC Casing Capping and conduit accessories of suitable size including one run of single core 4 sqmm PVC insulatedsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from Industrial socket to DB/main board with the help of copper lug/thimble complete all as specified and as directed. |
| 130 | S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) all as specified and as directed. Make :- Havells, Legrand, Standard. |
| 131 | Supply and fix copper tubing of dia 1/2\" duly insulated for refrigerent gas including making fixing arrangement on wall/ceiling/roof at sit complete all as specified and as directed |
| 132 | Supply and fix copper tubing of dia 3/4\" duly insulated for refrigerent gas including making fixing arrangement on wall/ceiling/roofat sit. complete all as specified and as directed |
