Tender For Improvement Of 1Th Ward Inthira Nagar Open Well In Uthangaraitown Panchayat
Tender Value
4 Lakhs
Estimated cost
Bid Submission
18 Sep 2024
0 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
uthangarai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Of 1Th Ward Inthira Nagar Open Well In Uthangaraitown Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in all soils andSub soils and to full depth as may be directed hardRock requiring blasting inclusive of shoring,Shuttering and celing out water wherever necessaryRefilling the sides of foundation with excavatedEarth in layers of 15cm thick well rammed andConsolidated, depositing the surplus earth withinThe compound in places shown by the departmentalOfficerswith initial lead and lift and clearing and Levelling the site etc., complete |
| 2 | Dismantling the Existing Damaged RR Masonry including all Cost of metrial and labour for removing and disposal etc as per stadndard Specification |
| 3 | Plain Cement Concrete 1:4:8 Mix (one part cement, Four part M.sand and Eight part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 4 | Brick work in cement motor 1:5 mix(one cement and five sand) using 2nd class country brick of size 9\"x41/2\"x3\" includingcuring finishing and cost and conveyance of materials and labour chargeetc completeas per std specification. |
| 5 | Plastering Cemend mortor 1:5mix (one cement and five sand) 12mm thick includingcost and conveyanace of materials and labour charge etc completed as per std specification. |
| 6 | Plain Cement Concrete 1:1½:3 Mix (one Part of cement, One and half Part of M- Sand and three Part ofaggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 7 | Supplying and erecting centering for sides and soffits including supports and struttingupto 3.00m heightfor plane surface such as RCC Slab, Rectangular Beams, Tee (or) ELL Beams, Lintel Bed Block, Slabs, Landing Slabs, Beams Canopy, Side Slab (or) Square (or) Round columns etc., as detailed below with all cross branching using M.S. Sheets of size 80cm x 60cm and B.G. 10 stiffended with welded M.S. Angles of size 25 x 25 x 3mm for boarding laid over silver oak or country wood joints of 10cm to 30cm to dia spaced at 75cm c/c etc., complete complying with standard specifications as directed by departmental officers etc., complete. For Beam |
| 8 | Supplying fabricating and placing in position of steel rods using TMT. or Ribbed Tor Steel including cost of binding wire, cost of labour charges for fabrication and placing in positionetc. Complete. Complying with std. specifications. |
| 9 | Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part M.sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications. |
| 10 | Supplying and fixing of M.S.Grill Gate of approved design using necessary mild steel flats for inner and outer members which should be fixed to Gate frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications. |
| 11 | Dewatering using 3HP Paintingtwo coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 12 | Dadooing the walls with glazed tiles of 15 c.m x 15c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc. |
| 13 | OPENWELL SUBMERSIBLE PUMPSET AS PER IS 14220 / 2002 WITHOUT PANEL BOARD |
| 14 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lampscapacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 15 | Supply and delivery of 4.00 sq mm Water Proof cable. |
| 16 | Supply and Run of 2x4 sq.mm(84/0.3) PVC insulated Sc unsheathed Cu.Conductor of 1100V grade in 25mm dia G.I pipe (Bclass) suitable bend at both ends with necessary angle iron up right and end supports for mains. |
| 17 | Supply and Run of 2x4 sq.mm(84/0.3) PVC insulated Sc unsheathed Cu.Conductor of 1100Von 7/20 Gibearer wire for service connection mains. |
| 18 | Supply and fixing of following electrical materials 16Amps MTPC Switch16 Amps fuse carrier |
| 19 | Supply and fixing m.s single phase panel board metersheet box including cost and convayance of materials and labour charge etc complete. |
| 20 | Single phase panel board (2.0 HP) withD.O.Las per standard specification. The pump set should be supplied with 5Mflat submersible copper cable. |
| 21 | 1000liter H.D.P.E water tank with ISI mark (1270/1996) |
| 22 | Supply and delivery of following pipe pipe line materials(with ISI mark) etc complete. |
| 23 | 32 mm GI pipe with B class |
| 24 | 32mm G.I Capling |
| 25 | 32mm G.M Non Retrun valve |
| 26 | 32mm dia G.Ibend with coupler |
| 27 | 32mm dia G.I union |
| 28 | 32mm G.M Gate valve |
| 29 | 20mm GI pipe with coupler medum class |
| 30 | 20mmG.I Coupling |
| 31 | 20mm CICP Tap |
| 32 | 25mm upvc pipe |
| 33 | 19mm nylon rope |
AI Tender Summary
Tender Timeline
Sep 09, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 18, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender