Tender For Construction Of Repair And Renovation Single Toilet In Haldibari Municipality 2Nd Floor Nulm Dept. Ward No-07 , Under Haldibari Municipality
Tender Value
1.39 Lakhs
Estimated cost
Bid Submission
16 Sep 2024
0 days left
EMD
2798
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
haldibari → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Repair And Renovation Single Toilet In Haldibari Municipality 2Nd Floor Nulm Dept. Ward No-07 , Under Haldibari Municipality
BOQ
| Sl. No. | Item Description |
| 1 | 125 mm thick Brick Work with First Class Brick in Cement Morter (1:4 ) in Ground Floor |
| 2 | Cement concrete with 30 mm down graded shingles excluding shuttering. With N. B. Varity(a)1:3:6 proportion |
| 3 | Hire and labour Charges for shuttering with Centering and necessary staging upto 4 mt. using approved stout props and thick hard wood planks of approved thickness with required bracing for Concrete Slabs, Beams, Column, Lintel curved or Straight including fitting fixing & striking out after completion of works.a)25 mm - 30 mm thick wooden shuttering as per decesion & direction of EIC.Ground Floor |
| 4 | Ordinary Cement concrete (mix 1:1.5:3)with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (pakur varity) |
| 5 | Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc.initial straightening and removal of loose rust (if necessary) cutting and requisit length hooking and bending to correct shape,placing in proper position & binding with 16 gauge black annealed wire at every intersection, complete as per drawing & directiona) For works in foundation, basement and upto roof of G. floorI) Tor Steel/ Mild Steel JSW/JSP/SHYAM |
| 6 | Plaster (to wall, floor, celling etc.) with sand & cement morter including rounding off corners or chamfering of corners as directed & racking out joints of roughening of concrete surface including throating, nodding and drip course where necessary (Ground floor)(i)(c) 15 mm thick (6:1) - in Ground Floor( Inside Rooms) |
| 7 | Neat Cement punning about1.5 mm thick in wall dado,window, sill, floor, drain. etc. using cement @ 0.152kg/100sqm |
| 8 | Priming one Coat on timber plasteredsurface with syntheticoil bound primer of approved quality including smoothening surface by sand-papering etc. |
| 9 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand-papering etc, including using of approved putty etc. on the surface of necessaryb)(iv) On Steel two coats With other than hi-gloss ofa) iv) timber plasteredsurface ( With other than hi-gloss) |
| 10 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty ii) Luxury Quality( In side Plaster)(Two coats) |
| 11 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the sameIn ground floorOUT SIDE iii)Two coats |
| 12 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.(A)WALLDeep Colour & White |
| 13 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency]requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. (b)WithChawk Dungri (iii) Area of each tile exceeding 0.6 sq.m but not excedding 1 sq.m. Floor |
| 14 | Wood work in Door Window Frame fitted and fixed complete including a protective coat of Painting at the Contact Surface of the frame excluding cost of concrete, Iron Butt hinges & M.S. clumps.( SAL - LOCAL)Ground Floor |
| 15 | Pannel Shutter of Doors & Windows as per design (each Panel consisting of single planks without joints) including fitting & fixing the same in position but excluding cost of hinges & other fittings iii) 35 mm thick shutters with 19mm thick panel of size 30 to 45 cm.(Sishu,Gamar,….) |
| 16 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(b) 40mm X 6mm, 200mm Length |
| 17 | Iron butt hinge of approved quality fitted and fixed with steel screw (bearing ISI mark.)vi) 100 mm x 50 mm x 1.25 mm |
| 18 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base b) 150 mm grip x 12 mm dia rod |
| 19 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(vii) 225mm long x 10mm dia. bolt. |
| 20 | Supplying, fitting and fixing windows and ventilators with or withoutintegrated grills conforming to IS 1038-1975 and manufactured fromrolled steel sections conforming to IS 7452-1974 with non-frictionprojecting type, box type hinges, glazing clips, lugs locking bracket,handle plate etc, including hoisting in position, straightening ifrequired, fixing lugs in cement concrete ( 1:2:4) with stone chips 20mm down cutting holes and mending good damages to match withexisting surface complete in all respect excluding glazing.(b) Openable steel windows as per IS sizes with side hung shuttersand horizotal glazing bars. [The extra rate admissible for theopenable portion only] |
| 21 | Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987.i) 4mm thick clear glass. |
| 22 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(a) 500 litre capacity |
| 23 | Labour for hoisting plastic water storage tank.(i)Upto 1500 litre capacity(a) Upto 1st story from G.L |
| 24 | Labour for punching hole in plastic water storage tank upto 50 mm dia |
| 25 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i)Single Socketed 3 Meter Length (b)110 mm |
| 26 | Supplying,fitting and fixing cast iron \"P\" or \"S\" trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (A) \"P\" Trap(iii) 100 mm |
| 27 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(ii)470 mm X 280 mm X 340 mm |
| 28 | upplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.(a) With \"P\" trap (with vent) |
| 29 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 30 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 31 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(i) 450 mm X 300 mm size |
| 32 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(ii)450 mm long |
| 33 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iii) 900 mm long |
| 34 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. |
| 35 | Supplying, fitting and fixing shower of approved brand and make.(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). |
| 36 | (ii) Chromium plated round shower with revolving joint (Equivalent to Code No. 541(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 37 | Supplying, fitting and fixing towel rail with two brackets.(b) Aluminium(ii)25 mm dia. and 600 mm long |
| 38 | Supplying, fitting and fixing liquid soap container.(b) PTMT(Prayag or equivalent) |
| 39 | Supplying, fitting and fixing soap holder.(a) PTMT (Prayag or equivalent |
| 40 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 41 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar |
| 42 | (ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 43 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed WorkPVC Pipes20 mm |
| 44 | 25 mm |
| 45 | 50 mm |
| 46 | 100mm |
| 47 | supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/ 2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).(a) With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth.(ii)100 mm dia. (internal) |
| 48 | Supplying, fitting & fixing Cast iron single branch equal with door conforming to I.S. 1729/2002 including joining and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (ii)100 mm dia |
| 49 | upplying, fitting & fixing H.C.I. bend with door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (a) With valamoid joints including sealing the top with cement mortar (4:1)(ii)100 mm dia. |
| 50 | Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Paymentof Painting will however bepaid seperately). (i) 100 mm dia. |
| 51 | Additional |
| 52 | GST for Sl. No. 1 To 50as applicable @ 18% |
| 53 | LABOUR CESS @ 1% |
AI Tender Summary
Tender Timeline
Sep 07, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 18, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender