|
| 1 | Taking down shutters of any description not exceeding 1 Sq. M each complete all as specified and as irected |
| 2 | Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and as irected |
| 3 | Taking down Chowkats or frames with shutters not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and as irected |
| 4 | Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and as irected. |
| 5 | Taking down Chowkats or frames exceeding 1.5 Sq. M and not exceeding 4 Sq. M each complete all as specified nd as directed |
| 6 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each complete all as pecified and as directed |
| 7 | Taking down, easing, adjusting and refixing in the same opening shutters of any description not exceeding 1 Sq. Meach and refixing builders hardware as required including renewal of unserviceable screws etc. complete. |
| 8 | Taking down, easing, adjusting and refixing in the same opening shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and refixing builders hardware as required including renewal of unserviceable screws etc. complete. |
| 9 | S & F Pressed steel frames size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed |
| 10 | S & F Pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed |
| 11 | Providing cement concrete type B0, 1:2:4 (12.5 mm graded aggregate) fillingconcreteinpressed steelframeand windows frames, any size, single or double rebate and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates etc complete all as specified and as directed by Engr-in- Charge. |
| 12 | S & F40 mm thick Flush shutters, solid core construction, with block board core and plywood panels, andboth faces covered with decorative veneer with lipping/frame to match complete all as specified and as directed |
| 13 | S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified. |
| 14 | S&F 2nd class hard wood, 35 mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.20 (a); supplied & fitted to Chowkatsall as specified. |
| 15 | S & F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced withMS squaretube, |
| 16 | S&F solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification |
| 17 | S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (b) |
| 18 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 exceeding Half brick wall and not exceeding one brick wall. |
| 19 | S & F in repairs Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg including taking down the existing fitting. |
| 20 | S & Fin repair65 mm long, 4 Levers,Mild Steel Mortice Lock, vertical Type complete all as specified and as directed |
| 21 | S & F 300 mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 22 | S & F in repair 300 mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate comp lete. |
| 23 | S&F 25X3mm flat iron for hold fasts. |
| 24 | S&Fin repairs 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws in timber frame as in cup board, cup board shelves complete all as specified and as directed. |
| 25 | S&F butt hinges, extruded brass , with mild steel hinge pin, bright polished and fixed type B12of size 75 mm. |
| 26 | S & F 75 mm long Brass handles cast type, polished bright complete all as specified and as directed |
| 27 | S & F 40 mm dia., cup board knobs fixed with nut, screw and washer ofmild steel bright finished fixed in repairs |
| 28 | S & F Hasp and Staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 100 mm size |
| 29 | S&F butt hinges,medium weight cold rolled mild steel of 100 mm. |
| 30 | S&F butt hinges,medium weight cold rolled mild steel of 75 mm. |
| 31 | S&F in repairs butt hinges,medium weight cold rolled mild steel of 75 mm. |
| 32 | S&F Aluminium handles, cast type, anodised of size 150 mm |
| 33 | S&F Aluminium handles, cast type, anodised of size 125 mm |
| 34 | S&F in repairs Aluminium handles, cast type, anodised of size 125 mm |
| 35 | S&F Aluminium anodiser barrel tower bolts of extruded sections of size 150 mm. |
| 36 | S&F Aluminium anodiser barrel tower bolts of extruded sections of size 125mm |
| 37 | S&F in repairs Aluminium anodised barrel tower bolts of extruded sections of size 125mm |
| 38 | S&F Aluminium anodised barrel tower bolts of extruded sections of size 100mm |
| 39 | S&F in repairs Aluminium anodised barrel tower bolts of extruded sections of size 100mm |
| 40 | S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of length . |
| 41 | S&Fin repair Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of length . |
| 42 | S & F Aluminium plate type II Gate and shutter, hook & eye 150 mm sizein fix in repairs |
| 43 | S & F 3 mm thick Sheet glass, ordinary quality and glazingin squares not exceeding 0.5 Sq. M in each pane |
| 44 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. |
| 45 | S & F 4.8 to 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane |
| 46 | S&F Stainless steel wire cloth, 0.36mm dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, and including II nd class hard wood beads straight (any size) for lazed or gauged joinery renewed incl mitrtrd etc. and painting exposed surfaces of beads with two coats of synthetic enamel paintcomplete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F in repairs Stainless steel wire cloth, 0.36mm dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, and including II nd class hard wood beads straight (any size) for lazed or gauged joinery renewed incl mitrtrd etc. and painting exposed surfaces of beads with two coats of synthetic enamel paintcomplete all as specified and directed by Engineer-in-Charge. |
| 48 | M & L for preparing new steel surfaces of any description over 10 cm girth and width and applying two coat of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified. |
| 49 | M&L preparation of new wooden surfaces any applying two coats of synthetic enamel paint over a coat of pink pirmer. |
| 50 | M&L preparation of old painted wooden surfaces any applying a coats of synthetic enamel paint |
| 51 | Taking down cement plaster and the like from brick or stone walland concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc., complete all as specified. |
| 52 | M&L for rendering 10mm thick on fair faces ofbrick or concrete surfaces in cement mortar 1:6, including finishing even and smooth without using extra cement, complete all as specified. |
| 53 | M&L for preparation of new plaster surface and applying two coats of distemper oil emultion on new wall surfaces and including treating with 1mm thick wall care putty and a coat of primer, white or tinted complete all as specified and directed |
| 54 | Preparing newly plastered surfaces of walls and applying three coats of white wash. |
| 55 | S & F Plain Aluminium sheeting 0.56 mm thick in straight flashing fixed in repair complete all as specified and as directed |
| 56 | S & F in repair Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150 mm long fixed in repairs |
| 57 | S & F Mild steel work in framed work such as grills, Framed guard bars, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165. |
| 58 | Taking down hood covers of rolling shutters loose brackets plates or guide properly greasing helical spring, shafts, and guide channel for proper functioning of rolling shutter of the following size and refixing covers in position after repairs complete (i) upto 10 Sqm area of shutter |
| 59 | Taking down rolling shutter any type including top covers for carrying out repairs/ replacement of worn out parts such as brackets guide shafting pulleys, gear wheels gear boxes and straightning partition side parts press button rails, tightening end clips, cleaning and greasing the parts to in good condition and refixing of the following sections :- Note :-(i) Spare parts required for replacement shall be measured and paid separately.(ii)The rate quoted shall be deemed to include for fixing of spare parts replaced.(a) Shutter area n.exc 10 Sqm |
| 60 | (b)Shutter area exc 15 Sqm |
| 61 | Supply only the following items :-(a) Heavy duty springup to 35 cm long |
| 62 | (b) Heavy duty spring 35 to 45 CMlong |
| 63 | (c)Gear box set |
| 64 | (d) Gear wheel (Steel/CI) |
| 65 | (e) Gear warm |
| 66 | (f)Shaft wheel with bearing |
| 67 | (g)Gear boxhandle |
| 68 | (h)Press button rail unit |
| 69 | (j) Side guide (12 guage) |
| 70 | (k)25 mm dia & 150 mm long shaft with 25 mm inner dia bearing (2 Nos) for steel sliding door |
| 71 | (l)End clips |
| 72 | (m)Safety lever lock MS |
| 73 | (n) Partition patties 75 mm wide (mild steel strip) |
| 74 | (o) Heavy shafting pipe mild steel of 40 mm dia |
| 75 | (p) Heavy shafting pipe mild steel of 50 mm dia |
| 76 | (q) Top Cover (18 gauge) |
| 77 | (r) Mild steel work of any type and any size |
| 78 | S & Fin repairs25 mm stainless steel curtain rodall as specified and as directed. |
| 79 | S & F inrepairs 25 mmdecorative Brackets for curtain rod all as specified and as directed |
| 80 | S& F in repair aluminium powder coated door seal with brush fixed by screw at bottom of door all as speified and as directed |
| 81 | S & F Anodised Aluminium frame for doors, windows, ventilators, fixed partitions etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified. |
| 82 | S&F anodised powder coated of any colour (thickness of powder coating not less than 50 micron) aluminium window/ventilator shutters of sliding type without sash , aluminium sections weighting0.55 kg/m including necessary joining cleats, glazing clips, rubber paking , anodised aluminium snap beading screws, rollers, holding and also with locking (arrengements complete all as specified and directed.Note 4.8 mm thick glass or stainless steel wire cloth shall be measured and paid separately. |
| 83 | S & F Anodised Aluminium window and ventilator shutters, fixed type without sash bar with powder coating of any colour of minimum 50 micron thick,, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc., complete all as specified. Note 4.8 mm thick glass or stainless steel wire cloth shall be measured and paid separately. |
| 84 | S&F anodised powder coated of any colour (thickness of powder coating not less than 50 micron) aluminium window/ventilator shutterspin head of side hung type without sash , aluminium sections weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking , anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long (1 Nos) in shelton shutter, stainless steel butt hinges type B-21 75 mm long (02 Nos) friction hinges 300mm (01 pair) in glazed shutter suitable handle 1No and 100 mm powder coated aluminium tower bolt (02 Nos) with aluminium flat and screws complete all as specified and directed.Note 4.8 mm thick glass or stainless steel wire cloth shall be measured and paid separately. |
| 85 | S & F powder coated aluminiumdeco grill with apperture of size 60 x 45 mm securing with suitable aluminium channel to frame complete all as specified and as directed Make: Jindal or equivalent section from Hindalco/Inddalco/MS Ajit Ind Pvt Ltd |
| 86 | S & F Anodised aluminium door shutters any colour (thickness ofpowder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprenepacking, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 87 | S & F Prelaminated particle board 9 mm thick, interior grade, prelaminated both side with decorative choice lamination ISI Marked IS-12823) fixed as panels in aluminiumjoinery etccomplete all as specified and as directd |
| 88 | S & F in repairs providing & Fixing false ceilingwith semi perforated 12mm thick micro tegular edged GRG false ceiling tiles.at all height with GRG ( Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99 % NRCO. 50 to 0.75 as per IS 8225-1987, nonombustible as per BS 476 (part-4)-1970 and light reflectance of 85 % (miinimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15x32 mm of length 3000mm cross-T of size 15x32mm of length 1200mm and secondary intermediate cross -T of size 15 x32 mm of length 600mm to form gris dodule of size 500 x 600 mm suspended from ceiling using galvanised mild steel items (galvanized @ 80 grams per sqm) i.e 50 mm long 8mm outer diameter M S dash fasteners 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40 mm of length3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws.The work shall be carried out as per specificationsand as per directions of the Engineer-in- Charge. |
