Tender For Execution Of Civil Work Including Electrical Fittings Under Repair And Upgradation Of Booking Counter At Purana Qila, New Delhi
Tender Value
45.71 Lakhs
Estimated cost
Bid Submission
12 Sep 2024
0 days left
EMD
91422
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
purana → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Execution Of Civil Work Including Electrical Fittings Under Repair And Upgradation Of Booking Counter At Purana Qila, New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Conservation Work |
| 2 | Removing of tensile fabric SIOEN725 GSM PVDF shed with100x100 MS column and 3.50 m height for from turnstile machine at entry and exit gate. |
| 3 | Providing & Fixing fabric SIOEN725 GSM PVDF sheet at a height of approx 2.70 mtr over turnstile machine at entry and exit gate |
| 4 | \"Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal WorkExposed on wall \" |
| 5 | \"Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil \" |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 8 | Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 10 | Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
| 11 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer\"s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 |
| 12 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 25 mm up to 40 mm |
| 13 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood |
| 14 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture |
| 15 | Provision for providing and fixing 8mm Float glass at publicaton counter |
| 16 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead |
| 17 | Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on cement board as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 2116 26.43.1 Cement Fiber Board 8 mm thick as per IS 14862:2000 of type B (High pressure Steam Cured) |
| 18 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 19 | \"Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer\" |
| 20 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.80 mm (+0.08%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerincharge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 21 | Provision for fixing of screen / Jalie of ACP sheet 5mm thick of req design to curtain the drinking water kiosk from front side including all tranes and fabric as per requirement and design approved by the engineer incharge |
| 22 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 23 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 24 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 25 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent) |
| 26 | Removal of 12 mm thick toughened including frame all complete as per direction of Engineer-in-charge |
| 27 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 28 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete |
| 29 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.80 mm (+0.08 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 -600mm) |
| 30 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - Exposed face machine cut and table rubbed with rough backing. 30 mm thick |
| 31 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of SUB HEAD : 14- REPAIRS TO BUILDING 1140 Engineer-incharge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 32 | Providing & fixing electrical item required for booking counter(a) Switch 5Amp (Roma/havells or equivelent) |
| 33 | Power Switch and socket 15amp (Anchor/Havells or equivalent) |
| 34 | Fall ceiling light 2x2 (Syska/Philipsor equivalent) 36W |
| 35 | Ceiling light 12W (Syska/Philipsor equivalent) |
| 36 | Fan ( Bajaj/crompton or equivalent)1200 mm |
| 37 | fan Regulator 5steps High Speed ( Havells/crompton or equivalent) |
| 38 | Socket 10Amp (Roma/havells or equivelent) |
| 39 | combined 16Amp |
| 40 | 2.5mm wire (Phinolex or equivelent) |
| 41 | tape |
| 42 | C clamp |
| 43 | screew 1.5\" |
| 44 | MCB 32 amp Havells or equivalent |
| 45 | MCB 16 amp Havells or equivalent |
| 46 | MCB 63 amp Havells or equivalent |
| 47 | Providing & Fixing 2.0 Ton Air Conditioner Inverter Ceiling Cassette Ceiling-mount DC Inverter AC (HITACHI/Misbbishi or equivalent) with 1year warranty with complete fitting |
| 48 | Provision for repair and maintenance of Ceiling Cassette Ceiling-mount DC Inverter AC installed at booking counter, Interpetation center and interpetation office(a)Filling Gas |
| 49 | (b) Repair and service |
| 50 | Provision for purchsing essential articles for booking counter (a) Toughned Glass door withhandle |
| 51 | door lock with fitting charges |
| 52 | Office Net chair |
| 53 | wooden rack with shelfs as per design by ASI |
| 54 | Electriduct Stainless Steel Wire Guard Surface Raceway Metal Cord Cover(5ft) |
| 55 | LED TV \"(32 inch) HD Ready LED Smart Android TV with Built-in Google Assistant (2020 model) (LG/One plus/sony or equivelent )LED TV \"(32 inch) HD Ready LED Smart Android TV with Built-in Google Assistant (2020 model) (LG/One plus/sony or equivelent ) |
| 56 | Provision for providing & fixing CCTV camera at different locations to watch the activities insideand outside booking counter on LED TV including all fittings & fixtures with labour etc complete (a) Wire cat 6 (100 mtr)(Finolex, kalinga or equivalent) |
| 57 | 4MP CCTV camera (bullet) (CP Plus and Hikvision or equivalent) |
| 58 | 4MP CCTV Camera 360 degree camera (CP Plus and Hikvision or equivelent) |
| 59 | N.V.R of required 8 ports(Hikvision or equivalent) |
| 60 | Accessrories & fittings And service charges |
| 61 | Providing & fixing first class teak wood frames signage’s including brass signag’s for including board its size 7x18 inch including brass engraved plates fill black colour in engraved area than grinding, buffing polishing & finally lacquering and fir upto wood in-frame with help of adhesive and finally sprit polish as per approved sample in direction of engineer in incharge |
| 62 | Providing & Fixing stainless steel 1.62 mm thickness nameplate of mate finish with engraved letter both in Hindi and English including black paint in engraved letter including grinding, buffing, polishing and finally lacquering coating as per approved sample and as per direction of engineer incharge |
| 63 | Providing & Fixing retro vmyl printing in a flexible plastic sheet and fixing an a aluminized composed it panel its thickness 3 mm including designing shaping cutting pasting and finally laminated with plastic sheet as per approved sample in |
| 64 | Provision for drawings / Mapping and photography with documentation plan elevation section Architecture drawing and structure drawing proper documentation etc complete as desired by ASI |
| 65 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Preaminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : 8.26.1 12 mm thick. |
AI Tender Summary
Tender Timeline
Sep 06, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 13, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender