|
| 1 | Dismantling and taking down ACSR conductor of any size complete all as specified and directed by Engineer-in-Charge. |
| 2 | Taking out/down unserviceable, defectiveany type/size HT cable including disconnecting/dismantling all the electrical connections all as required at site complete all as specified and directed. |
| 3 | Dismantling and taking down cross arm of MS channel or angle section, clamp etc complete all as specified and directed by Engineer-in-Charge. |
| 4 | Dismantling and taking down PCC Pole of any size in all cantt stacking to MES Yard by using own transportcomplete all as specified and directed by Engineer-in-Charge. |
| 5 | Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts earthed grade, of size 3 core 185 Sqmmcomplete all as specified and as directed. |
| 6 | Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts earthed grade, of size 3 core 120 Sqmm complete all as specified and as directed. |
| 7 | Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts earthed grade, of size 3 core 95 Sqmm complete all as specified and as directed. |
| 8 | Supply and fix cable jointing kit for 11KV grade cable for Indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 50 to 95 Sqmm complete all as specified and as directed. |
| 9 | Supply and fix cable jointing kit for 11KV grade cable for Indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 120 to 185 sqmm complete all as specified and as directed. |
| 10 | Supply and fix cable jointing kit for 11KV grade cable for Outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 50 to 95 sqmm complete all as specified and as directed. |
| 11 | Supply and fix cable jointing kit for 11KV grade cable for Outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 120 to 185 sqmm complete all as specified and as directed. |
| 12 | Supply and fix cable jointing kit for 11KV grade cable for straight through, cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 50 to 95 sqmm complete all as specified and as directed. |
| 13 | Supply and fix cable jointing kit for 11KV grade cable for straight through, cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 120 to 185 sqmm complete all as specified and as directed. |
| 14 | Supplying, laying, jointing and testing and commissioning 150 sqmm, 3.5 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor andPVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supplying, laying, jointing and testing and commissioning 120 sqmm, 3.5core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor andPVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supplying, laying, jointing and testing and commissioning 70 sqmm, 3.5core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor andPVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supplying, laying, jointing and testing and commissioning 25 sqmm, 4 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor andPVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supplying, laying, jointing and testing and commissioning16 sqmm, 4 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor andPVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supplying, laying, jointing and testing and commissioning10 sqmm, 4 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor andPVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. |
| 20 | Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m depth; or n. exc 10 Sqm on plan and n. exc 1.5 m in depth for foundations of poles, struts, stays etc. or layingunderground cable etc.in soft/loose soil,& getting out including taking out old brick or precast cable cover for reuse complete all as specified and as directed. |
| 21 | Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed. |
| 22 | Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level n. exc 1.5 m above the starting point complete all as specified and as directed. |
| 23 | M & L for sand cushioning with dry coarse sand to under ground cable around the cable after laying the cable complete all as specified and as directed.Note : Thickness after punning shall be considered for payment. |
| 24 | Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1 with flat, size 300 mm x 180mm x 40mm complete all as specified and as directed. |
| 25 | Supplying and laying un-reinforced precast concrete cable cover, class LV,type 1 with flat, size 250 mm x 150 mm x 40 mm complete all as specified and as directed. |
| 26 | Supply, Installation, Testing and Commissioning of Chemical Earthingbased on 3 meters long GI earth pipe C grade as a electrode50mm bore duly fixed with connector at top for connection of copper strip 32 x 6mm riveted/nut bolt after 12 mm boring. The Electrode is surrounded by mixture of TERRA GEL 20 kg and TERRA ECO 22Kg Chemicalcompund powder including providing of pit cover heavy duty plastic of suitable size all as per manufacturer specificationcomplete all as specified and directed..Note:(i) Rate included for Testing commissioning including checking of earth continuity and earth result complete all as specified and as directed.(ii) Venders are boundto get earthing result less than 1 ohm. If the result of earthing not achieved less than 1 ohm by one earthing then another additional earthing will be provided by the contractor as bi-pot including interconnecting with copper strip of same configuration at no extra cost to achieve test result as specified and all as directed by Engr-in -charge.(iii) Rates for copper earth strip of size 32x6 mm up to 7.5 RM will deemed to be included in quoted rates.Copper earth strip beyond 7.50 Mtr shall be measured and paid Separately under relavent items. |
| 27 | M & L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried in ground (earth pit not less than 2.25 Mtr deep below normal ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level, connecting to the Galvanised iron earth lead 4.0 mm size by means of bolts, nuts check nuts and washers earth lead protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4), type B1, using 20mm graded stone aggregate with 40mm thick cover of RCC (1:2:4), reinforced with XPM (wieght not less than 4 Kgs/Sqm) , GI light grade 20mm bore pipe for watering perforated at the bottom 7.5 meter long placed on top edge of earth plate common salt and charcoal filling test point , funnel, wire mesh and earth work in hard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Mtrs all as per electrical Plate No.3 of SSR Part I and connectingto earth test point all as specified or indicated including testing on completion |
| 28 | M&L copper strip of size 32x6mm buried in ground and connected one end to electrode terminal and other end to terminal box with suitable size of GI nut, bolt & washers complete all as specified and directed. |
| 29 | Supplying, installation, testing and commissioning of 11 KV 630 Amps having short circuit capacity 21 KA for 3 Sec Outdoor (IP55), RMU (Ring main unit) 2 – way comprising of 02 Nos. motorized operated load breaker switch and 02 Nos. 630 Amps fixed type motorized spring charging VCB electrolytic grade copper busbars all inside single, gas filled,welded stainless steel 304/441 or better IP 67 Degree of Protection tank with min thickness , 2 to 2.5 mm thick for load bearing member and 1 to 1.6 mm for non load bearing member, internal arc classification, 21 KA for 1 sec on site repairable with site replicable / coupling / mechanism,etc. The enclosure shall have pad lockabledoors as per OEM design, fully covering the front facia and cable boxesensure fail safe anti theft protection. The unit along with Bus connected, fixed type Auxiliary transformer shall include the following along with all necessary accessories and fittings are required at site. |
| 30 | (A)Incoming Load Break Module - 02 Nos each consisting of following accessories:(i)Each switching – unit is designed as a three position switch. This three function switch combines the function of switch – disconnector an earthing switch(ii) 11 KV, 630 A Load Breaker Switch with interlocking line -earthing scheme both short circuit current ,21 KA for 3 Sec Making capacity – 50 KAp- 01 No(iii) Auxiliary contacts – 1 NO + 1 NC- 01 No.(iv) Spring – assisted motorized mechanism with un-inhabited operating shaft for emergency manual operation with integrated earthing switch – 01 No(v) Cable terminals cable bushing situated upto 240 mm or as per ORM tested design from cable cover to allow ease of access for installation/ testing/ replacement purpose) with door arrangement for enhanced safety (IP54+IP3X) interlocked to prevent access of size upto 11 KV, 185 Sq mm, 3 Core, along withXLPE aluminium cable termination/ End Kits Each set of 04.(vi) Right angle boots (push on type) Each set of 04 (vii) Arc proof cable covers having cable entry from bottom, front with interlocking mechanism including earth switch – 01 No.(viii) Capacitive voltage indication fixed type system as per IEC 6123 with LED – 01 Set(ix) Fault passage indicator – It is to be provided for each incomer Load break unit, FPI with LED / digital display to be added to detection of cable fault – 01 No(x) ON, OFF, Earth mechanical indication on the front mimic of the panel – 01 NoCable cover standard - 01. |
| 31 | (B) 02 Nos., outgoing VCB module each consisting of following accessories: -(i) Each function – unit consists of a vacuum – circuit breaker in combination with a three position – switch. The three-position switch fulfils the operation of the disconnector – function and earthing function.(ii) 11 KV, 630 Amps Fixed type VCB module with series disconnector cum earthing switch of short circuit breaking current / withstand –, 21 KA for 3 Sec Making Capacity – 50 KAp- 01 No(iii) Auxiliary contacts – 1 No + 1 NC- 01 No.(iv) Stored – energy motorized high – endurance spring charging mechanism (M1+), with inbuilt spring charging lever and mechanically latched ON/OFF push -buttons to allow handle less and un-inhabited operation – 01 No.(v) Cable terminals cable bushing situated upto 240 mm or as per OEM tested design from cable cover to allow ease of access for installation/ testing/ replacement purpose) with door arrangement for enhanced safety (IP54+IP3X) interlocked to prevent access up to 11 KV, 185 Sq mm, 3 Core, along with XLPE aluminium cable termination Each set of 04. |
| 32 | (vi) Right angle boots (push on type Each set of 04 (vii) 3 O/C + 1 E/F self-powered numerical protection relay with low and high set for Over current and Earth Fault. Relay should have facilities to display the maximum loaded phase current also. Relay shall record minimum 5 fault records with time stamping. Relay shall be communicable with RS 485 Port on MODBUS Protocol. – 01No/ per VCB outgoing.(viii) Relay for OTI / WTI / B – relay protection – 01 No.(ix) Associated ring Core cast- resin insulated CT s 50/1 Amps, 2.5 VA, 10 P 10 Protection – Each set of 3(x) Arc proof cable covers having cable entry from bottom, front with interlocking mechanism including earth switch – 01 No.(xi) Capacitive voltage indication fixed type system as per IEC 6123 with LED – 01 Set(xii) ON, OFF, Earth mechanical indication on the front mimic of the panel – 01 No.(xiii) Emergency trip push button – 01 No |
| 33 | (C)01 No Bus – connected, fixed – type Auxiliary transformer with floor- mounted compartment of matching height and depth, positioned along – side RMU to provide required aux. supply for spring charging motor and metering consisting of following accessories:(i) 1-Ph (11 KV / rt3): 230 VAC, 500 VA Auxiliary transformer – 01 No(ii) 2X12 Volt DC battery – 01 Set(iii) Battery charger – 01 No, with indiacation of status of functioning.(iv) HRC fuse links for primary side isolation and AC/DC MCBs for secondary isolation – 01 Set(v) Voltmeter & RYB LED indications to confirm AC/DC supply availability – 01 Set(vi) Anti – condensation space – heater – 01 No(vii) CFL lamp for illumination and 3 pin socket with switch – 01 No |
| 34 | (D)Standard mano meter -01 for each tank, Operating handle - 02 , cable clamping provision(standard)-01 /for every cable enrty, Operation and maintance manual - 01, installation and commissioning manual - 01, Foundation as per OEM Recomendation (Earth Work and PCC works) for placing RMU on Plinth protection of the Equipment including Fencing with gate is deemed to be included in the cost quoted. Height of plinth should not be less than 0.45 mtrs from ground level.as per Electric Norms. Note :-The above moduleconsisting of Load break Switchs andVCBs shall be alligned appropriately and must have electrical and mechanical interlocking as per latest electrical safety norms including installation on plateform as recommended by OEM complete. |
| 35 | S&F Sheet metal enclosure HT Bus bar chamber of size 1000x1000x450 mm with angle iron stand of size 40x40x6 mm 600 mm long including HT 11 KV,3 phase Copper bus bar of size 100 Amp 3 way suitable for connecting HT cableas a junctionincluding connecting of existing cables with sizes95 to 185 sqmm 3 core complete all as specified & directed by Engineer-in-Charge. |
| 36 | S&F Hot Dip Galvanized octagonal pole (7 Mtr long) Top dia -70 mm , Bottom Dia -130 mm, Thick -3mm , base plate -220 mm x 220 mm x 12 mm with 1.5 mtr single Arm HDG OD-48.3 F.Bolt 4 Nos. 20x 600 mm. including foundation as per company standard specification and approved Drg including suitable three phase bus bar connection with 6 Ams MCB complete all as specified & directed by Engineer-in-Charge. Note : Drawing will be approved by GE. |
| 37 | S&F Hot Dip Galvanized octagonal pole (7 Mtr long) Top dia -70 mm , Bottom Dia -130 mm, Thick -3mm , base plate -220 mm x 220 mm x 12 mm with 1.5 mtr DoubleArm HDG OD-48.3 F.Bolt 4 Nos. 20x 600 mm. including foundation as per company standard specification and approved Drg including including suitable three phase bus bar connection with 6 Ams MCB complete all as specified & directed by Engineer-in-Charge.Note : Drawing will be approved by GE. |
| 38 | S & F in replacement, new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP67 roadway luminaire 60 watt with heat resistant clear toughened glass,better optics for uniform distribution street/Roadway luminaire, with driver complete fitting with all accessories and following specifications, complete all as specified and as directed :- (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt.(b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 10°C to Plus 50°C. (d) Power factor : Minimum 0.95. (e) THD : Max10%. (f) IP rating : Minimum IP66. (g) IK rating : Minimum IK07.(h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended).(l) CCT : 5700 K. (m) CRI : Morethan 70.(n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)Note :- Bracket for fixing and cable for connection shall be measured and paid separately. |
| 39 | Boring of holes under road/pavement/hard standing or any other situation by manual mean for passing GI pipe 80mm bore and making good both the ends complete all as specified and directed by Engineer-in-Charge.Note : Pipe and cable will be measured and paid separately |
| 40 | M & L forcutting road /plinth /hard standingfor laying of pipe forpassing cable through roadwithout damaging Road / Plinth /Floor including making good with bitumen ready mix material as per existing specifications complete all as specified and directed by Engineer-in-Charge. |
| 41 | Boring of holes under road/pavement/hard standing or any other situation by manual mean forpassing GI pipe 50mm bore and making good both the ends complete all as specified and directed by Engineer-in-Charge.Note : Pipe and cable will be measured and paid separately |
| 42 | M & L for PVCinsulated,PVC sheathed Copper conductorelectric cable 3 x 1.5 Sq mm 1100 volts gradefor pole box to street light fitting on poleall as specified and directed by Engineer-in-Charge. |
| 43 | Supply and fix of GI pipe 80 mm bore light grade for protection of cable including provision of clamps, nut, bolts etcrequired for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directred by Engineer-in-Charge. |
| 44 | Supply and fix of GI pipe 50 mm bore light grade for protection of cable including provision of clamps, nut, bolts etcrequired for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directred by Engineer-in-Charge. |
| 45 | S & F of Automatic Street Light Control Switch using Infrared Sensor based Nature Switch for automatic switching of street lights. Nature Switch operation should be based on Natural Lux Level. Required Illuminance level for switching On is <= 30 Lux and for switching OFF >=10 Lux. The Circuit should be suitable enough to take three phase load of 12 KW with 3 Nos Contactors, 3 Nos incoming MCBs & 3 Nos Outgoing MCBs of 40-63 Amps each & circuit wiring (Copper) of min 10 sqmm. complete all as specified and directed by Engineer-in-Charge. |
| 46 | M & L for 200 mm dia cable route indicator made of CI plate 8 mm thick with spike to angle iron 25 X 25 X 5mm, 40 cm long marked as LT/HT cable jointing on conductor coil plate complete including fixing and excavation in soft/loose/hard/dense soil, PVC embedded block size 300 X 300X 300 mm (1:3:6), type C-1, using 20 mm graded stone aggreggate complete all as specified and as directed. |
| 47 | M&L for PCC 1:3:6, type C2 (40 mm graded stone aggregate) as in foundation of pole, stay including frame work where required complete all as specified and directed. |
| 48 | M&L for PCC (1:2:4), type B-1 coping with 20 mm graded stone aggregate for grouting, finished even and smooth without using extra cement complete all as specified and directed. |
| 49 | M & L Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT, 25x20 cmsize complete all as specified and directed. |
| 50 | Supplying and laying synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 KV for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed. |
| 51 | M & Lfor repair of damange portions duringlaying of HT/ LT cable, including replant of existing arboriculture and repairs the same and making the gooddisturbed surfaces of wallin CM 1:3 with white wash or existing colour, complete all as specified anddirecedby the Engineer in charge. |
| 52 | M&L for fabrication of gates of angle/pipes or any other section with gusset plates, rails, braces etc, complete, drilling for fixing of sheel sheeting ot other covering etc to be preprepared for hanging or sliding with and including either hooks hinges or steel hanging door fitting also fastening and foixing complete including painting with two coats of approved colour over a coat of red oxide primer. |
| 53 | M&L for chain link MS galvanised fancing of any size and type including lines wires, straining bolts and binding wires etc complete all as directed by Engr-in-charge. |
| 54 | M&L for galvasiedmild steel channel, angle section etc for post of chain link fencingincluding notching for wire etc confirming to Fe 290, grade E-165 complete,embedded in PCC. Note : PCC shall be measured and paid seperately under respective item of BOQ. |
