|
| 1 | Civil work |
| 2 | foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out theexcavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 manufactured sand derived from Recycled concrete aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled aggregate (RA) |
| 5 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1cement : 2 coarse sand(zone-III) derived from natural sources: 4 graded stone aggregate20mm nominal size derived from natural sources). |
| 6 | Stone masonary work in 1:6 cm in F& P comp. |
| 7 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | Carriage of stone (quarry bolder) upto 1 kM |
| 9 | Breaking of stone boulder |
| 10 | Fly ash flat soling |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases andspiral staircases above plinth level up to floor five level excluding the cost of centering,shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand includingmanufactured sand derived from Recycled concrete aggregate (RCA) upto 20%: 3graded stone aggregate 20 mm nominal size Recycled concrete aggregate (RCA) upto20%) |
| 12 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore |
| 13 | Pro and laying 25 mm PS flooring 1:2:4 |
| 14 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 15 | P/F 2 mm MS sheet |
| 16 | P/F 1 mm MS window |
| 17 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade :One or more coats on old work |
| 19 | White washing with lime to give an even shade :.1 Old work (two or more coats) |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers |
| 21 | Total impact of GST for the purpose of CTC |
