Tender For Construction Of Cable Landing Station In Bangaram Under Kli Submarine Cable Project Sw: Providing Attached Toilet Facilities For Both Suites In Second Floor Including Connected Miscellaneous Civil Works.
Tender Value
9.57 Lakhs
Estimated cost
Bid Submission
11 Sep 2024
0 days left
EMD
19148
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kavaratti → Lakshadweep
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction of Cable Landing Station in BANGARAM under KLI Submarine Cable Project SW: Providing attached toilet facilities for both suites in second floor including connected miscellaneous civil works.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing / spreading of surplus excavated soil as directed, within a lead of 50m / within compound : |
| 2 | All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 4 | 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels / slabs not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) : 3 graded stone aggregate 20 mm nominal size). |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 7 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 10 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with Is, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 11 | Providing and fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 12 | 300x10 mm |
| 13 | 150x10 mm |
| 14 | Providing and fixing aluminium handles ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 15 | 100 mm |
| 16 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge |
| 17 | Extruded section profile size 48x40 mm |
| 18 | Providing and fixing to existing door frames. |
| 19 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanized/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanized M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanized M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanized M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 20 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 21 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 22 | Providingandlayingwaterproofingtreatmenttoverticalandhorizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compoundconformingtoIS2645inrecommendedproportionsincluding rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv)IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm). |
| 23 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
| 24 | Extra for grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing instead of grouting the joints with white cement and matching pigment complete as per direction of Engineer-in-charge. |
| 25 | Size of 300 x 300mm |
| 26 | 12 mm cement plaster of mix : |
| 27 | 1:6 (1 cement: 6 fine sand) |
| 28 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 29 | 1:6 (1 cement: 6 fine sand) |
| 30 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand). |
| 31 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade |
| 32 | New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 33 | Providing and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 34 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 35 | One coat |
| 36 | Two coats. |
| 37 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 38 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 39 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : |
| 40 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 41 | DismantlingWash basinof all sizesand refixing the same at suitable location with available C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 42 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 43 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 44 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 45 | In cement mortar |
| 46 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stacking within 50 metres lead |
| 47 | Of area 3 sq. metres and below |
| 48 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 49 | For thickness of tiles 10 mm to 25 mm |
| 50 | Credit the value of the dismantled serviceablematerial to the contractor. |
| 51 | DismantledPVC door0.75x2.00m |
| 52 | Dismantled Aluminiumglazed window with frame ofopening size upto1.50x1.50m |
| 53 | DismantledPVC window with frame of openingsize upto0.60mx1.50m |
| 54 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 55 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 56 | W.C. pan with ISI marked white solid plastic seat and lid |
| 57 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 58 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 59 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 60 | Flexible pipe - 40 mm dia |
| 61 | Providing and fixing PVC floor trap of approved quality and make, with PVC screwed down or hinged grating, with or without vent arm couple, of self cleansing design of 150 X 150mm size and locking with PVC, half round strainer with provision of 1 to 3 waste inlets & outlets of range 75 to 40mm dia. for different appliances , all complete including cost of cutting and making good the walls and floors etc. |
| 62 | 100mm inlet and 75mm outlet |
| 63 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 64 | Rectangular shape 453x357 mm |
| 65 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 66 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 67 | Providing and fixing toilet paper holder : |
| 68 | C.P. brass |
| 69 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 70 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete. |
| 71 | Providing and fixing 15 mm dia C.P brass health faucet including CP brass connection pipe of required length, holding clamp etc. of best quality and make as approved by Engineer - in - charge. |
| 72 | Jaguar Brass Health Faucet with Long Cap Flexible Tube (Chrome Finish, 15 mm) |
| 73 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 74 | 20 mm nominal outer dia. Pipes. |
| 75 | 25 mm nominal outer dia .Pipes. |
| 76 | 32 mm nominal outer dia. Pipes. |
| 77 | Providing and fixing Chlorinated Polyvinyl thermal stability for hot & cold water supply, including all CPVC plain &Chloride (CPVC) pipes, having brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 78 | 20 mm nominal outer dia Pipes |
| 79 | 25 mm nominal outer dia .Pipes. |
| 80 | Providing and fixing Chlorinated Polyvinyl having thermal stability for hot & cold water supply including all CPVC Chloride (CPVC) pipes, plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge External work |
| 81 | 50 mm nominal outer dia Pipes |
| 82 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. Complete |
| 83 | 25 to 40 mm nominal bore |
| 84 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 85 | 25 mm nominal bore. |
| 86 | 20 mm nominal bore |
| 87 | 32 mm nominal bore. |
| 88 | Providing and fixing unplasticised PVC connection pipe with brass unions : |
| 89 | 45 cm length - 15 mm nominal bore |
| 90 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 91 | 15 mm nominal bore |
| 92 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 93 | 15 mm nominal bore. |
| 94 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 95 | 15mm nominal bore |
| 96 | Providing and fixing PTMT grating of approved quality and colour. |
| 97 | Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 98 | Providing and fixing C P brass soap Dish Holder of approved shape and size |
| 99 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter |
| 100 | Providing and fixing PTMT swiveling shower, 15 mm nominal bore, weighing not less than 40 gms |
| 101 | Providing and fixing unplasticized rigid polyvinyl chloride soil, waste and vent pipe with socket (conforming to IS 4985-1988) of pressure class of 4Kg/Sq.cm. Including jointing the pipe with solvent cement |
| 102 | 75mm diameter |
| 103 | 110mm diameter |
| 104 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 105 | Single tee with door - 75X75X75mm |
| 106 | Single tee with door - 110X110X110mm |
| 107 | Single tee without door - 75X75X75mm |
| 108 | Single tee without door - 110X110X110mm |
| 109 | 75mm bend |
| 110 | 110 mm bend |
| 111 | Vent cowl with wire mesh - 75mm |
| 112 | Vent cowl with wire mesh - 110 mm |
| 113 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 114 | For pipes 100 to 250 mm diameter |
| 115 | Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 116 | Inside size 90x80 cm and 45 cm deep including C.I. coverwith frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) : |
| 117 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : |
| 118 | For fixed portion Anodized aluminium (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 119 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodized aluminium (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 120 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 121 | With float glass panes of 4.0 mm thickness |
| 122 | Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. |
| 123 | 255 x 19 mm |
| 124 | Providing and fixing anodized aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 125 | Providing and fixing sun control film of thickness 1.5mil of approved make, colour and with self adhesive to glazed windows, doors and partitions as approved and as per the directions of the Engineer-in-charge. |
| 126 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x32 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x27 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x27 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge |
| 127 | GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 128 | Supplying Magic Home Bathroom Door Mats Anti Slip Water Soak of Size 40cmX60cm made of Microfiber beige colour of high pile of weave type tuftedor equivalentas per the manufacturer\"s specification all complete and as per the directions of the Engineer -in-Charge. |
| 129 | Providing, making and fixing offabriccurtainfor window openings of size up to 1.50 metres x 1.50 metresofapproved manufacturerwithsuspended from stainless steel pipeof diameter up to 40mmwith end capsfitted towallwithdisa necessary fasteners and spacers approvedbrand with approved coloured, quality and make fabric including necessary hardware etc. completeas directed by Engineer In charge. |
| 130 | Supplying and Providing Elegante Ritz Stainless Steel Cutlery Set for Dining Table with Stand - 24 Pcs. (Contains: 6 Dinner Spoons, 6 Dinner Forks, 6 Dinner Knives & 6 Tea Spoons + 1 Stand) (Black) or equivalentcompleteas per directions of Engineer-in-charge |
| 131 | Supplying and Providing Cello Opal ware Dazzle Series Tropical Lagoon Dinner Set, 18 Units | Opal Glass Dinner Set for 6 | Light-Weight, Daily Use Crockery Set for Dining | White Plate and Bowl Setor equivalentcompleteas per directions of Engineer-in-charge |
| 132 | Providing and fixing factory made solid Foam uPVC profile for kitchencabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposededges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardant with necessary screw holdingcapacity. Frame shall be fixed to wall using Expendable Fastenerwith necessary stainless steel screws, all complete as per directionof Engineer-in-charge. |
| 133 | Providing and fixing factory made Kitchen Cabinet Shutter/Partition20 mm nominal thickness of approved shade, quality and make,made from rigid foam sheets (Single extruded) having density 600Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edgebeading of same shade and colour. The shutter shall be fire retardant having necessary screw holding capacity. Shutter shall be fixed toframe using approved hinges with necessary stainless steel screws,all complete as per direction of Engineer-in-charge. |
| 134 | Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete : |
| 135 | Supplying and Providing Aqua guard Sure Delight NXT RO+UV+UF Water Purifier with 5 Stage Purification with 6L Storage and Suitable for Bore well, Tanker & Municipal Wateror equivalent completeas per directions of Engineer-in-charge |
AI Tender Summary
Tender Timeline
Sep 04, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 13, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender