Tender For Repair Replacement Of Internal Wiring Electrical Fittings Fixtures Renewal Of Bldg Earthing Ceiling Fans Exhaust Fans Geysers Split Window Type Air Conditioners Water Coolers Deep Freezer And Allied Works In Ro Otm Md Accn Dgqa Area Und
Tender Value
39 Lakhs
Estimated cost
Bid Submission
03 Oct 2024
0 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bangalore → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Replacement Of Internal Wiring Electrical Fittings Fixtures Renewal Of Bldg Earthing Ceiling Fans Exhaust Fans Geysers Split Window Type Air Conditioners Water Coolers Deep Freezer And Allied Works In Ro Otm Md Accn Dgqa Area Unde
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Sep-2024 | 8499Corrigendum | BOQ | 26-Sep-2024 |
| 2 | 26-Sep-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-Oct-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, call bell socket or power circuits) completeand making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Point wiring complete concealed with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories concelaed type wiringincl GI/ MS brandedsunken boxes suitable for normal/modular concealedon walls including plastic/heylam laminated sheet top cover 3 mm thick/modular frame and cover of suitable modulefixed with cadmium plated iron screws for housing modular/normal typeswitches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following :-One light point controlled by one switch |
| 3 | All as per item No. 2 above but forOne fan point controlled by one switch/regulator |
| 4 | All as per item No. 2 above but forOne light point controlled by 2 way switch |
| 5 | All as per item No. 2 above but forOne 3 pin socket out let 5 Amps on independent board |
| 6 | All as per item No. 2 above but forOne bell / buzzer point controlled by bell push |
| 7 | All as per item No. 2 above but forOne 3 pin socket out let 5 A on same board |
| 8 | All as per item No 2 but concealed wiring drawn through existing PVC conduit.One light point controlled by one switch |
| 9 | All as per item No. 8 above but forOne fan/Exhaust point controlled by one switch/regulator |
| 10 | All as per item No. 8 above but forOne light point controlled by 2 way switch |
| 11 | All as per item No. 8 above but forOne 3 pin socket out let 5 Amps on independent board |
| 12 | All as per item No. 8 above but forOne bell/buzzer point controlled by bell push |
| 13 | All as per item No. 8 above but forOne 3 pin socket out let 5 A on same board |
| 14 | Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through non-metalic existing PVC conduit medium density ISI markedincl accessories surface type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick GI/MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. |
| 15 | Point wiring completewith 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl PVC Casing & CapingISI marked incl accessories surface type wiringincl 1.6 mm thick GI/MS sunken boxes concealedon walls includinglaminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following One light point controlled by one switch |
| 16 | All as per item No. 15 above but forOne fan point controlled by one switch/regulator |
| 17 | All as per item No. 15 above but forOne light point controlled by 2 way switch |
| 18 | All as per item No. 15 above but forOne 3 pin socket out let 5 Amps on independent board |
| 19 | All as per item No. 15 above but forOne bell/buzzer point controlled by bell push |
| 20 | All as per item No. 15 above but forOne 3 pin socket out let 5 A on same board |
| 21 | Point wiringcomplete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic PVC conduit medium density ISI markedincl accessories concealedtype run on walls/ ceiling incl GI/MS terminal boxes fabricated with 1.6 mm thick MS sheetconcealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. |
| 22 | Point wiring completewith 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl PVC casing capingISI marked incl incl accessories surface type wiring run on walls/ ceiling incl GI/MS terminal boxes fabricated with 1.6 mm thick MS sheetconcealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.Note for Item No 2 to 7 :-(i) The earth wire for the points in the same circuit can be looped from point to point.(ii) Earth wire shall be taken inside the conduit.(iii)Cost of terminal box is deemed to be included in the item rate quoted for point wiring.(iv) Cost of a circuit ofany length of cablefrom DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls, in case of recessed or concealed conduit wiring will be paid separately in other items. |
| 23 | M&L for groove cutting in wall/floor and making good of distrubed wall/floor, painting of existing colour all as specified and directed by Engineer -in-Charge. |
| 24 | S&F in repair LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminiumhousing & integrated LED channelcomplete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No. BCLAB20 W LED P or equivalent Makes & model |
| 25 | S&F in repair LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel with white arcylic covercomplete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No.BCLSB 10W WH or equivalent Makes &model |
| 26 | S&F in repair 2\" x 2\" RecessmountedLED Luminaire36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking out old fittings as specified and directed. Make: Bajaj, Cat No : BZRSQL 36L LED WH GX MT or equivalent Makes & model |
| 27 | S&F in repair 2\" x 2\" Surface mountedLED Luminaire36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking out old fittings as specified and directed. Make: Bajaj, Cat No : BZRSQL 36L LED GX CW or equivalent Makes & model |
| 28 | Supply and fix in repair Slim surface mounted round LED down lighterof 12wattaluminium die cast body with premium diffuser to ensure glare free & even distribution of light.Make & Model No:BGSLO SLEEK SURFACE 18 W WH RD LED of BAJAJor equivalent |
| 29 | Supply and Fix in repair Modular switch 1 way 6A,1 module |
| 30 | Supply and fix in repair Modular switch 1 way 16A, 1 module |
| 31 | Supply and fix in repair Modular switch 2 way 6A,1 module |
| 32 | Supply and Fix in repair Modular Bell push 6A 1 module |
| 33 | Supply and fix in repair modular Socket, 6A - 2/3 pin combined 2 module |
| 34 | Supply and fix in repair modular Socket 6A/16A - 2/3 pin combined 2 module, |
| 35 | Supply and fix in repair modular type Fan step regulator, 120W - 2 module |
| 36 | S&Fin repair of of Switch piano flush button single pole two way 5 Amps all as specified and as directed. |
| 37 | S&F in repair of Angle holder PVC / polycarbonate type all as specified and as directed |
| 38 | S&Fin repair of switch piano flush type single pole one way 5 Amps |
| 39 | S&Fin repair of switch socket combination5 pin2 in 1, 5 A Flush typeall as specified and asdirected |
| 40 | S&F in repair of switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal all as specified and asdirected |
| 41 | S&F in repair of bell push flush type 5A all as specified and as directed . |
| 42 | S&Fin repair ofMCB SPN 240 volts 32/40 Amps complete all as specified and as directed |
| 43 | S&F in repair of MCB single pole 240 volts 10/16/20/32 Amps complete all as specified and as directed |
| 44 | S&F in repair ofMCB TPN 415 volts, 10KA \"C\" curve 63 Amps complete all as specified and as directed |
| 45 | S&F in repair ofMCB TPN 415 volts, 10KA \"C\" curve100 Amps complete all as specified and as directed |
| 46 | S&Fin repair of MCB DB SPN 4 way double door type 240 volts with 200 Amps rated busbaras specified and as directed. |
| 47 | S&F in repair of MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbaras specified and as directed. |
| 48 | S&Fin repair ofMCB DB TPN 4 way with double door type415 volts with 200 Amps rated busbar for housing MCBs as specified and as directed. |
| 49 | S&F in repair ofceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed |
| 50 | S&Fin repair of stepped type electronic fan regulator flush Switch/socket type all as specified and as directed |
| 51 | S&Fin repair ofDing Dong bellAC 230 volts single pole. |
| 52 | Removing of old existingand provision of new sub main wiring1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulatedsingle core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit all as specified and as directed |
| 53 | Removing of oldexistingand provision of new sub main wiring1100 volts grade multistranded FRLS copper conductors, two runs of single core 4 Sqmm along with 4 Sqm PVC insulatedsingle core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit all as specified and as directed |
| 54 | Removing of oldexistingand provision of new sub main wiring1100 volts grade multistranded FRLS copper conductors, two runs of single core 2.5 Sqmm along with 2.5 Sqm PVC insulatedsingle core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit all as specified and as directed |
| 55 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed including dismantaling and taking down old Earthing plates. |
| 56 | Supply and fixing in repair 30 WLED bldg securitylight fittingwith pressure die cast housing along with prismatic polycarbonate difuser with IP 66protection including taking out old fittings. Make:- Bajaj, Cat No.:- ENXT P 30L WH PO PC SD or Equivalent Makes & model |
| 57 | S&Fin repair of Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paintover a coat of red oxide primer including removing the old existing GIbracket from bldg complete all as specified and directed. |
| 58 | M & L excavation in trenches in hard/dense soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables on trenchs etc complete all as specified and as directed. |
| 59 | M & L for returning, filling in trenches incl spreading leveling watering and well ramming in layers with hard/dense soil not exc 25 cm thick in each layer complete as specified and as directed |
| 60 | M & L for removing excavated soil to a distance not exc 1.5 mtr above the starting point complete all as specified and as directed |
| 61 | M & L for sand cushioning with a layer of river sand 23 cm thick under and above the cable complete all as specified and as directed |
| 62 | S & L sub class burnt bricks for cable protection complete as specified as directed |
| 63 | S&L cable XLPE insulated screened PVC bedded galvanised steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor connected with suitable legs including neccessary roadcrossing if applicable and taking out the existing unserviceable cable for following size :-4 C x 16 Sqmm |
| 64 | All as per item No. 63 above but for4 C x 25 Sqmm |
| 65 | M&L for GI tubing light grade 40mm dia with all accessories for cable protection fixed on poles / bldgs / road and laid in trenches incl necessary MS clamps, bolts and nuts etc all as specified and as directed. |
| 66 | S&Fin repair Bulk Head Fittingsuitable for indoor application of 10 watt,including electrical connecion from ceiling rose with 3 core 1.5 sqmm sheathed wire all as directed. Make & Model No: Bajaj Cat part No: BIBWP 10W LED |
| 67 | S&Fin repair Decorative wall lightfixture made up of polycabonate suitable for indoor application of 9 watt LED lamp B22 base,including electrical connecion from ceiling rose with 3 core 1.5 sqmm sheathed wire all as directed. Make & Model No: Havells &Model : Globe |
| 68 | S&Fin repair LED Bulbsuitable for indoor application of 9 watt,to fit in Angle Holder or Decorative wall light fixture all as directed. Make & Model No: Havells Cat part No: ADORE LED PLUS 9 W |
| 69 | Taking down ceiling fan 1200mm/1400mm and wall mounted fan 300/450 mm sweep from position by duly disconnecting electric lines, preparing the surfaces, filling cavities with filler, after cleaning all dust, spray painting with one finishing coat of synthetic enamel paint including writing MES NO and replacing the split pin,rubber pully etc., includingrefixingand connecting the same complete all as specified and as directed. |
| 70 | Inspection, disconnecting electric connecting and dismantling of ceiling fan/exhaust/wall mounted fan of any type/size, cleaning including oiling and greasing the bearing, tighting of nuts and bolts and refixing on the old place complete after necessary repair/replacement of old parts all as specified & as directed. Note : Replacement of old parts shall be measured & paid separately. |
| 71 | Supply only ball bearing of various sizes / make as required for ceiling fans / wall mounting / exhaust fan includinggreasing complete all as specified and as directed. |
| 72 | Supply only Gun metal bush of any size / make suitable for ceiling fans all as specified and as directed. |
| 73 | Supply only capacitor 2.5 Mfd suitable for ceiling / exhaust / wall mounting fans complete all as specified and as directed. |
| 74 | Supply only capacitor 4.0 Mfd suitable for ceiling / exhaust / wall mounting fans complete all as specified and as directed. |
| 75 | PVC flexible cable twin twisted core of 23/0.0076 size multi stranded copper conductor suitable for connecting ceiling fans / exhaust /wall mounting fans complete all as specified and as directed. |
| 76 | Rubber bush with MS bolts, nuts & washers with \"U\" clamps for ceiling fans complete all as specified and as directed. |
| 77 | Dismantling /opening the ceiling fan of 1200 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling/re-fixing in its p complete all as specified and as directed. |
| 78 | Dismantling /opening the ceiling fan of 1400 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed. |
| 79 | Dismantling /opening the wall mounted fan of 300 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed. |
| 80 | Taking down exhaust fans 230 mm/300mm / 450mm sweep from position by duly disconnecting electric lines,preparing the surfaces,filling cavities with filler, after cleaning all dust, spray painting with one finishing coat of synthetic enamel paint including writing MES NO and replacing the split pin,rubber pully etc., includingrefixingand connecting the same complete all as specified and as directed. |
| 81 | Dismantling /opening the exhaust fan of 230 mm/300 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed. |
| 82 | M&L extension of down rod for ceiling fanupto 1.5 mtr including nut, bolts , washers complete accessories all as specified and as directed. |
| 83 | Supply and fix refrigerators, electric driven (single phase), capacity more than 310 Litres. BEE 5 star rated. Make : LG/Whilpool/IFB. |
| 84 | Supply and fix voltage stabilizer suitable for Split/window type AC 1.5/2 Ton capacity complete all as specified and as directed. Make : V Guard/Everest/ Sinotech1 KVA |
| 85 | All as per item No. 84 above but for2/3 KVA |
| 86 | All as per item No. 84 above but for5 KVA |
| 87 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TON completeall as specified and as directed. Make - Blue Star/Voltas/LG. |
| 88 | S&F ceiling fans complete with complete accessories, 230V, SP 1200 mm Sweep with BEE rating complete with all accessories and fixing the fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and as directed Make :- Havells/CG/ Bajaj. |
| 89 | S&F Exhaust fansAC single phase 230/ 240 V of size 300 mm sweep with louvers fixed outside with all accessories and fixing the exhaust fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as directed. Make :Bajaj cat No : 70046, MAXX AIR 300 mm or eqv in Make Havells/CGs/ Orient |
| 90 | S&F in replacement PVC Fresh air fan of 200mm sweep 1200/1400 RPM with louver. Make CG/Usha/ Orient/Phillips/Bajaj. |
| 91 | S&F in replacement PVC Fresh air fan of 150 mm sweep 1200/1400 RPM with louver. Make CG/Usha/ Orient/Phillips/Bajaj. |
| 92 | S&F in replacement of Single pole & neutral enclosure 20 Amps & 240 V with two pin and earth plug and socket complete with one single pole MCB 20 Amps. |
AI Tender Summary
Tender Timeline
Sep 26, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 26, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 03, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 03, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 10, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender