|
| 1 | DESCRIPTION OF ITEMS |
| 2 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 3 | Demolition of reinforced cement concrete in any positionnot exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 5 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame)n.exc 1.50 sqmeach. |
| 6 | M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular) {400 MM X 400 MM} as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and incl screed bed 15mm thick in CM 1:6 anddismantling of existing tiles complete all as specified and directed. |
| 7 | M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and incl screed bed 15mm thick in CM 1:6 and dismantling of existing tiles complete all as specified and directed. |
| 8 | M&L Glazed coloured ceramic tiles 450 x 300 x 7 mm to 8 mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 10mm thick in CM (1:4) on brick or concrete surfaces offinished rough to receive the glazed tiles . including dismantling of exixting tiles of any description or thickness in walls all as specified and directed by engg-in-charge |
| 9 | M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed. |
| 10 | M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4 finished the plaster surfaces fair and even complete all as specified and directed. |
| 11 | M&L for 5 mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection etc complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatment using mechincal device and applyingtwo coat exterior emulsion paint (weather coatof Berger or equivelent ) on old plastered wall with airless electric sprayers after prepearing old surface applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.. |
| 13 | M&L for applyingtwo coat exterior emulsion paint (weather coatof Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.. |
| 14 | M&L for applyingtwo coat OBD on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed. |
| 15 | M&L for complete removal of existing treatment using mechincal device and applying oftwo coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed |
| 16 | M&L for applyingtwo coat OBD on newly plastered ceillingwith airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed. |
| 17 | M&L for complete removal of existing treatment using mechincal device and applying oftwo coat OBD on ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed |
| 18 | S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs,hinges ( 125mm long-12 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fastetc., including Frames shall be filled with PCC 1:3:6., type C-0 (12.5 mm graded stone aggregate)complete all as specified and directed. |
| 19 | S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs,hinges ( 125 mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fastetc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate)complete all as specified and directed. |
| 20 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed. |
| 21 | Supply & Fix 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 22 | S & F wiremash door pvc providing 30mm thick factory made wire mesh solid pvc door shutter consisting of frame made out of M.S. Tubes of 19 gauge thickness and size of 19mm X 19mm for stiles and 15mm X 15mmfor top , lock and bottom rails. M.S. Frame shall have a coat of metal primer of approved make and manufacturer 19mm X 19m M.S. square tubes shall be covered with heat moulded plain sheet \" C\" channel made from 5mm thick PVC sheet manufactureed by an ISO-9001-2008 certified company , of size 30mm thickness and 90 mm width out of which 75mm shall be flat and 15mm shall be bent in 90 degree angle on either side forming stiles, one of the 90 degree bend edge is cut from stiles as well as rails to nails from inner side of door to hide wire mesh fixing steel screws. 5mm thick 115m wide PVC sheet out of which 100 mm shall be flat and 15 mm shall be bent in 90 degree on the inner side to form top and bottom rail and 130 mm wide pvc sheet out of which 100 mm shall be flat and 15mm shall be bent in 90 degree on both side to form lock rail . An additional 5mm thick pvc strip of 20 mm width is to be stuck on the interior side of the \"C\" channel using pvc solvent cement adhesive. panel will be of SS wire mesh of 24 gauge and 1.4 mm aperture to be fitted inside area of stiles and rails. The wire mesh in top , bottom, and lock rail is sealed with 15mm X 15mm tube with steel screw of size 13/6 mm. 10mm thick (5mmX2nos) thick pvc strip of 25 mm width is to be stuck & nails on Both side of G.I. wire mesh interior at the top , bottom &lock rail. 10 mm thick (5mmX2nos), 20mm wide cross PVC sheet as gap insert for top rail & bottom rail door to be fixed to frame with 3nos. M.s powder coated butt hinges size 100 mm X 25mm X 2mm and 32 mm long steel screws drilled suitable to pass throug both the walls of the M.S. tube other hardwares should be fixed with 19X6mm size steel screws etc. complete all as specified and directed. |
| 23 | S&F in repairs factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer\"s specification and drawing. |
| 24 | S&F in repairsPVC boards 19/20 mm thick any colour as in cabinets incl sshelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer\"s instructions including piano hinges, magnet catcher, handles etc. |
| 25 | S&F mild steel barrel tower bolt stove enameled black 200 mm size with bright bolt complete all as specified and directed. |
| 26 | S&F mild steel pressed handle oval type150 mm size, stove enameled black complete all as specified and as directed . |
| 27 | Supply & Fix 300mm longMild steel sliding door bolt , plate type stove enamelled black with bright not less than 16mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed. |
| 28 | S&F MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed . |
| 29 | M&L, preparing of new wooden surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 30 | M&L, preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on old decorated woodensurfaces, complete all as specified and directed. |
| 31 | S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 32 | S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt, complete with out glazing bars, dovetailed or welded complete all as specified and directed. |
| 33 | S&F Steel ventilators, top hung, with glazing bars with hinges and peg stay etcincluding taking down old ventilator complete all as specified and directed. |
| 34 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed . |
| 35 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 36 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 37 | M&L, preparing of new steel surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 38 | M&L, preparation old previously treatedsteel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on thesteel surfaces, complete all as specified and directed. |
| 39 | S&F, factory made solid panel PVC doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 40 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specificationcomplete all as specified and directed |
| 41 | S&F, aluminium, anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed. |
| 42 | S&F , butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,complete all as specified and directed. |
| 43 | S&F,aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 44 | M&L for rubber moulded chequered cement concrete coloured tiles20 mm thick ,area exc 0.06 sqm but n.exc 0.16 sqm with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 15mm thick screed bed in CM 1:6complete all as specified and as directed. |
| 45 | M & L for non skid tiles, exterior grade, pattern of size 300x300mm, 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and including 15mm thick cement screed bed in CM 1:4 and dismantling of existing tiles complete all as specified and as directed. |
| 46 | M&L for cement concrete 75mm thick typeD-2 (1:4:8) using 40 mm graded agg as in sub base to flooring complete all as specified. |
| 47 | M&L for RCC 1:1.5:3 type A-1 as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 48 | Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed. |
| 49 | M&L for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed. |
| 50 | M&L for 18 to 20 mm thick Green Marble work(table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platformand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding exposed edgesand including dismantling existing tiles/stones complete all as specified and as directed. |
| 51 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 52 | M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed. |
| 53 | M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 54 | Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thicknessincluding cover fillets complete all as specified and directed. |
| 55 | Supply & Fix GI powder coated snap grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixedto walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length complete all as specified and as directed :- (i) main tee of size -32mmx24mmx0.3mm (ii) cross tee of size -26mmx24mmx0.3mm(iii) wall angle - 24mmx24mmx0.3mm |
| 56 | S & F 4 mm thick E-Board classic for, 595 x 595 mm size fixed with staples on snap grid as in ceilingcomplete all as specified and as directed. |
| 57 | S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed. |
| 58 | All as per item No 56 above but except material complete all as specified and as directed. |
| 59 | Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 60 | M & Lcement concrete type D-2 1:4:8(40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed . |
| 61 | M & Lcement concrete type C2 1:3:6(40mm graded stone aggregate) in surface channels and drain complete all as specified and directed . |
| 62 | M & L, forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stoppedends etc. complete all as specified and directed. |
| 63 | S&F in repairs bib taps cast copper alloychromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe. |
| 64 | S&F in repairs Stop valves/ Angle valves cast copper alloychromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe. |
| 65 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. |
| 66 | Supply & Fix in repair vitreous china counter top wash basin oval shape, size 550 x 400 mm includingPVC waste pipe and waste coupling fixed complete all as specified and directed. |
| 67 | Supply & Fix in repair 600 mm long PVC Connection 15mm size with PTMT nutscomplete all as specified and directed. |
| 68 | Supply & Fix in repair15 mm diapillar tap (long nose)cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered \"Hot or Cold\" with long swan neck swivel typescrewed for iron pipe and fixed complete all as specified and directed. |
| 69 | Supply & Fix in repair 15 mm bore Stop valves cast copper alloychromim plated fancy type with long shank and cup (concealed type) screwed down , high pressure , screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 70 | Supply & Fix in repair Brass chromium plated shower rose 125mm size with or with out swivel joint fixing to steel pipe or for unions complete all as specified and directed. |
| 71 | S & F(in repairs) vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed. |
| 72 | S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed |
| 73 | S&F in repair towel rail 600mm long of chromium plated with and incl chromium plated brass screw and wooden /plastic cleats. |
| 74 | S&F in repairchromium plated brass Peg set of Six fixed withbrass screw and wooden /plastic cleats. |
| 75 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling complete all as specified and directed |
| 76 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 77 | Refixing old serviceable 15 mm GItubing and connection in new or old position (concealed in Wall, ceiling &floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed |
| 78 | S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laidconcealed in floors incl cutting chases where required incl taking down 15 mm bore steel tubing and connections complete complete all as specified and directed |
| 79 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 80 | Refixing old serviceable 20 mm GItubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed |
| 81 | S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required incl taking down 20 mm bore steel tubing and connections complete complete all as specified and directed |
| 82 | S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed. |
| 83 | Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clampscomplete all as specified and directed. |
| 84 | S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed. |
| 85 | S&F in repairs,125/110mm bore PVC (SWR) \"P’ trap complete all as specified and directed. |
| 86 | S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 87 | S &F in repairPVC (SWR) 75 mm dia vent cowl |
| 88 | S&F in repairs, 110mm bore PVC(SWR)bends any radius,complete all as specified and directed. |
| 89 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 90 | M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protectionfinisheed even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction. |
| 91 | Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortarcomplete all as specified and directed. |
| 92 | M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6(20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed . |
| 93 | M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed. |
| 94 | M&L for machine cut kota stone slab flooring 18-20 mm thick with white marble all arond 150mm wideover and including 15mm thick cement screed bed in CM 1:6 laidand jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshedpolishing and including dismantling existing kota/tile work complete all as specified. |
| 95 | M&L for machine cut kota stone slab, 18-20 mm thick in riser and thired single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing and including dismantling existing kota/tile work complete all as specified and directed. |
| 96 | S & F in repair1800mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 97 | Supply only water proofing compound ,complete all as specified and as directed |
| 98 | M&L for repair to existing chajjas of any thickness not exc100mm thick and including necessary form work ,reinforcement ,RCC (Nominal mix) (1:1.5:3),rendering in CM 1:4 complete all as specified. |
| 99 | Taking/removing existing tar felt treatment of any description from RCC roof slab, terrace etc by means of MS scrapper patty or any other suitable tools and removing to a distance 500 mtr from the starting point and depositing as directed. |
| 100 | M&L for 15 mm thick rendering on fair faces of concrete surfaces of roof as water proofing treatment in CM 1:4, including finishing the surfaces even and smooth, complete all as specified and directed. |
| 101 | M & L for water proofing treatment to roofs surfaces including a coat of applied bituminous shalitex primer @ 0.30 lit per sqm evenly on roof surface and a coat of hot bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3 kg/sqm) unrolled and bonded completly to the substrate with side overlap of 75 mm and end overlap of 100 mm and then sealed/fused by flame or bitumenand a coat of hot blown bitumen grade 85/25 @ 1.2 kg/sqm shall be applied on top ofAPP modified polymeric membrane as per manufacturer instruction and finally it will be finished with a coat of aluminium paint @ 0.20 kg/sqm ,complete all as specified and as directed . |
| 102 | S&F plain aluminium sheeting 0.56mm thick , alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing ( length and girth as fixed) includingdismantling sheet complete all as specified anddirected. |
| 103 | M & L for GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc. in walls , ceilings, stanchions, beams, etc. including all laps , cutting and waste complete all as specified anddirected. |
| 104 | S&F in repair decorative curtain rod made of MS pipe covered with coloured PVC layer dia of rod 25 mm with decorative ends complete all as specified and as directed. |
| 105 | Dismantling structural steel work including door , gatesbut excluding framed truss etc. |
| 106 | Demolition of Brickwork or stone/ boulder masonry, built in CMincluding all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 107 | M & L for providing precast cement concrete bonders (for stone walling)type B1 (1:2:4) using 20 mm graded stone aggregate, set in cm 1:6 complete all as specified and directed. |
| 108 | M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 109 | M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed |
| 110 | S&F 75mm bore PVC(SWR) pipes single socketed for weep holes , in any length as in weep holes complete all as specified and directed. |
| 111 | Taking down carefully Copper/Aluminiumpoint wiring (Light ,fan, socket or power) complete,(fittings such as switches, ceiling roses, pendants, regulators, sockets etc) removing unserviceable or serviceablematerials from siteand making good the disturbed surface of walls, floors etc, complete all as specified and directed. |
| 112 | M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings andincluding continuous earth wire ofPVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :-(a) One light point/Fan point controlled by one, one way switch of 5/6 Amps. |
| 113 | (c) One 3/5 pin socket outlet 5/6Amp on same board with other switch of 5/6 Amp. |
| 114 | (d) One 3/5 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board. |
| 115 | (e)All as per item 2 herein above but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete. |
| 116 | S & F Modular Switch flush type, whitefinish,5/6 amps, single pole, one way all as specified and directed. |
| 117 | S&F Modular Switch, whitefinish,15/16 amps, single pole, one way,complete all as specified and directed. |
| 118 | S&FModular Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps with shutter,complete all as specified and directed. |
| 119 | S&F Modular Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), with shutters,complete all as specified and directed. |
| 120 | S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed. |
| 121 | S&F electronic modularfan regulator any type on the existing phenolic laminated sheet AC, SP 230 volts complete as all specified and directed. |
| 122 | S&F white cover plate with frame modular type of 02 module complte all as specified and directed. |
| 123 | S&F white cover plate with frame modular type of 03 module complte all as specified and directed. |
| 124 | S&F white cover plate with frame modular type of 04 module complte all as specified and directed. |
| 125 | S&F white cover plate with frame modular type of 06 module complte all as specified and directed. |
| 126 | S&F white cover plate with frame modular type of 08 module complte all as specified and directed. |
| 127 | S&F white cover plate with frame modular type of 12 module complte all as specified and directed. |
| 128 | S&F metal flush box modular type of 02 module complte all as specified and directed. |
| 129 | S&F metal flush box modular type of 03 module complte all as specified and directed. |
| 130 | S&F metal flush box modular type of 04 module complte all as specified and directed. |
| 131 | S&F metal flush box modular type of 06 module complte all as specified and directed. |
| 132 | S&F metal flush box modular typeof 08 module complte all as specified and directed. |
| 133 | S&F metal flush boxmodular type of 12 module complte all as specified and directed. |
| 134 | Supply and fixing in repair LEDIntegrated Batten T5box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twistedcopper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed. |
| 135 | Supply and fixing in repair LEDIntegrated Batten T5box type surface mouted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twistedcopper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed. |
| 136 | S & F in repair1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed. |
| 137 | S&F Sub main wiring with two single run of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductordrawn through with & including conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface/concealed type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly,including taking down complete all as specified and directed. |
| 138 | Material and Labour for earthing in repair complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed. |
| 139 | Supply and fixing Water heater storage type, electric,capacity 25 litres.BEE 5 star rated with grouting with four nuts and bolts,heating element 2.0 kw adjustable temperature setting knob for temp setting between 20 C to 75 C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation with all accessories such as safety valve, thermostate,NRVcomplete with chromium plated flexible two number pipe connection for hot / cold water supply. |
| 140 | Supply and fixing PVC fresh air fan, single phase 230/240 V OF size 250 mm sweep 1400 RPM withsuitable louvers and making connections with twisted copper flexible wire complete all as specified and directed. |
| 141 | M & L for cutting, opening circular/ Rectangular in shape hole on wall of fixing of exhaust fan of size 300/200/450 mm sweep including plastering and making good the disturbed surface and surrounding complete all as specified and directed. |
| 142 | S&F in repair sheet metal enclosure withsocket plug top and MCB with a two pin earth plug and socket complete withone single pole MCB 20 Amp complete all as specified and directed. |
| 143 | Supply and Fixing in repair MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 415 volts, made out of 16 guage sheet steel double door including grautingsuitable for housing MCB\"s and isolators, complete all as specified and directed. |
| 144 | S&F in repair MCB DB sheet metal enclosure for DB, SPN, 8 way having protectionwith 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB\"s and isolators,concealed in wallcomplete all as specified and directed. |
| 145 | Supply and Fix for in repair of MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed. |
| 146 | Supply and Fix in repairMCB single pole & Neutral 240 volts, 40 amps,of 10 KA complete all as specified and directed. |
| 147 | S&F in repair MCB Triplepole & Neutral 415 volts, 63 amps,of 10 KA complete all as specified and directed. |
