|
| 1 | Cat (A) -Items to be supply and installation |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out. |
| 3 | Cement concrete in foundation, filling and mass concrete Type D2 1:4:8 (40 mm graded aggregate) m&l. |
| 4 | Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area m&l. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 6 | Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 100mm thick for subbase. S & F |
| 7 | RCC in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete M & L (including 25 mm thick DPC course in plinth beams with Water proofing compond as per manufacturer\"s instruction). |
| 8 | RCC in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs type B1(1;2:4) 20mm graded Aggregate M & L (including Water proofing compond in 15 mm thick (1:4) mortar over slab as per manufacturer\"s instruction). |
| 9 | Acrylic Sheat /Toughned Glass 6 mm thick for sky light S & F |
| 10 | RCC in Beams type B1 (1:2:4) 20mm graded aggregate M & L |
| 11 | RCC in Columns type B1 (1:2:4) 20mm graded aggregate M & L |
| 12 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia Fe-410 grade-250 M & L |
| 13 | Mild steel bars 8mm dia, in stirrups, cut to length, bent to shape required, including, cranking, bending spirally including mild steel wire Fe-410 grade-250 M & L |
| 14 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams for fair finished surface of concrete M & L |
| 15 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface of concrete M & L |
| 16 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal) M & L |
| 17 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (sloping) M & L |
| 18 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. M & L |
| 19 | Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in ( 1:6) with cement mortar M & L |
| 20 | Brickwork with sub- class ‘B’ bricks straight or curved on plan in half brick thickbuilt in ( 1:4) with cement mortar M & L |
| 21 | Rendering 15mm thick on fair faces of brick work or concrete surfaces with cement plaster in (1:4) M & L including Water proofing compond on outer surfaces as per manufacturer\"s instruction). |
| 22 | Rendering 12mm thick on fair faces of brick work or concrete surfaces with cement plaster in (1:6) on inner surfaces M & L |
| 23 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified S & F 1 RM= 0.55 kg m&l. |
| 24 | Anodised aluminium door shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (3 no.) suitable handle (2 no.)and aluminum tower bolts complete all as specified S & F |
| 25 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified S&F. |
| 26 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing S & F |
| 27 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 28 | Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane 3mm thick glass S & F |
| 29 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 S & F |
| 30 | Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples S & F |
| 31 | Mortice lock, vertical type, size 100 mm Brass 4 levers S & F |
| 32 | Aluminium handles, cast type, anodised 125mm size S & F |
| 33 | Aluminium anodised, barrel tower bolts 150 mm length of ex truded section and fixed m&l. |
| 34 | Butt hinges, mediumweight, cold rolled mildsteel, and fixed 100 mm size m&l. |
| 35 | Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed S&F. |
| 36 | Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150 mm length m&l. |
| 37 | Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar (1:6) M & L |
| 38 | Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) 50mm thick for subbase m&l. |
| 39 | Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade M & L |
| 40 | Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match M & L |
| 41 | Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match M & L |
| 42 | Machine cutkota stone slab flooring 20-25mm thick over cement screedbase laid and jointed with grey cement slurry mixewith pigment to match the shade of the slab including rubbing and polishing complete with Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes M & L |
| 43 | Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete. S and F |
| 44 | Surface dressing n exc 15 cm deep |
| 45 | Site Clearance |
| 46 | Rough excavation not exceeding 1.5 m deep and getting out |
| 47 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 48 | Walling of random rubble, uncoursed well bonded, bedded solidly hearted built in cement mortar 1:6 m&l. |
| 49 | Walling of random rubble, uncoursed well bonded, bedded solidly hearted built in cement mortar 1:6 except stone. |
