Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-09-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-09-2024 |
| Sl. No. | Item Description |
| 1 | M & L for Cleaning of over head tanksstaging 19 to 21 metre height, capacity 1.0 Lakh gallon in New Cantt Prayagraj including painting of tank with onecoat of synthetic enamel paint after cleaning ofsteel surface andpipes to match with existing shade and applying one coat of cement base paint on plastered / unplastered surface of walls, pillars, complete dome and ceiling of RCC OH tank on external surface including preparation of surfaces, and writing of date of cleaning, capacity of tankwith paint after painting of tank with suitable size letter, with & including replacement of wirenet/mesh of stainless steel wire 1.4 mm dia fixed with tacks of ventilation of tank, complete all as specified and directed. The tank cleaning shall be comprising of operations as follow:-(a) In the first step dewatering of the tank shall be carried out by opening drain out valve(b) In the second step, removal of left over dirty water and sludge with suitable sludge removal pump shall be carried out. (c) In the third step, cleaning of internal walls, floors, ceiling of tank shall be carried out by using high jet pressure machine, pressure of water shall not be less than 80-120 bar and ensured that no dirt, sludge or moss remain on surface of tank.(d) In the fourth step, the remaining sludge shall be removed from the floor with the help of industrial vacuum cleaner. (e) In the fifth step, tank shall be sterilized by spraying anti-bacterial agent using same high-pressure machine.This agent shall be of tank cleaning or equivalent as approved by GE. Dosage of this agent must be as per OCED guidelines 423 adopted on 17 Dec 2001 (i.e. 1 litre of concentrated agent mixed with 40 ltrs water to produce mixture; 1 litre of this mixture shall be used to disinfect 10000 ltrs capacity tanks and higher capacity tanks in position.) |
| 2 | (f) In the last step, treatment of inside of tank by exploring UV radiation to kill further suspended or floating bacteria.This is to be done by glowing UV lamp inside tank as per NSF standard 55-1991(i.e. 16000 µW-sec/Sq.cm or in other words 3-5 minutes according to capacity of tank)Note:-(i) The work shall be got executed through reputed specialized water tank cleaner and the same shall be approved by GE before commencement of work. (ii) After completion of work, a certificate regarding bacteria free surface from specialized firm, shall be submitted to Deptt by the contractor duly signed by Engineer-in-Charge. (iii) Coloured photographic evidence of stage wise cleaning of OHT shall be submitted in duplicate to the Deptt. (iv) Date of cleaning and capacity of tank shall be written on OHT with paint with letters or figures (Block, Roman) 5cm high complete all as directed. (vi) The cost for above requirement shall deemed to be included in the unit rate quotedand neither extra payment shall be made on this account, nor any claim entertained at later stage on this purpose. [Location Pump House Nos.3] |
| 3 | All as per Sl. item No. 01 above, but capacity 50000 Gallon (Location Pump House No. 4 & 11, 16,10, 12,14 & 19) complete all as specified & directed. |
| 4 | All as per Sl. item No. 01 above, but capacity 35000 Gallon[Location Pump House Nos. 2, 6, 5, 7 complete all as specified & directed. |
| 5 | All as per Sl. item No. 01 above, but capacity 30000 Gallon [Location Pump House Nos. 9, 13, 17, 18 complete all as specified & directed. |
| 6 | Comprehensive maintenance of granular chlorination plant including dozing pump, with high pressure single head motored adjustable dozing pump type agitator pump, dozingsystem complete including replacement of all unserviceable worn out spare parts required for smooth functioning of plant (supply of these parts shall be measured and paid separately, under respective items of this schedule) including testing of plant for satisfactorywater tests complete all as specified and directed in following locations at New Cantt, Prayagraj. Total Pump House 16 Nos. Note :- (i) Contractor shall carryout chlorine test at all installation daily andmaintain chlorine test report& submit to Engineer-in-Chargeall as specified & directed.The unit rate quoted shall be deemed to include all the necessary test equipment/kit and charges for testing.(ii) In case contractor does not maintain the installation a sum of Rs.250.00 per day per installation shall be recovered from contractor\"s due. |
| 7 | Repair/Servicing of heavy duty chemical dosing system plunger type suitable to inject solution up to 10 LPH working pressure 6 Kg/Cm2 complete all as specified & directed. Note: (i) Servicing to be carried out by authorised distributor or manufacturer of the said dosing system. A certificate to be produced in original form distributor /manufacturer after completion of specified work. (ii) Items/Spares required to make the system functional will be measured and paid separately as supply only under respective item here-in-before. |
| 8 | Supply only PVC Dosing head assembly with Suction and delivery adopter with NRV for above mentioned plant complete all as specified & directed. |
| 9 | Supply only PVC NRV with glass ball for suction and delivery adopter for above mentioned plant complete all as specified & directed. |
| 10 | Supply only PVC adopter for suction and delivery without NRV for above mentioned plantcomplete all as specified & directed. |
| 11 | Supply only PVC stainer washer type heavy duty or Y type strainer for suction for above mentioned plant complete all as specified & directed. |
| 12 | Supply only Teflon gland square type 3 mm for above mentioned plant complete all as specified & directed. |
| 13 | Supply only chemical Oil seal with cap for above mentioned plant complete all as specified & directed. |
| 14 | Supply only Plunger assembly without PVC dosing head 10 LPHcomplete all as specified & directed. |
| 15 | Supply only Heavy duty FRP tank of capacity 175 litre for above complete all as specified & directed. |
| 16 | Servicing of dosing agitator gear box by unscrewing foundation nuts & bolts, Strip opening of gear box & supply and replacing the worn out spares as given below and re-assembling the same after servicing/repair and fixing at site and testing on completing complete all as specified and directed :-(i)Chemical Oil Seal(ii)\"O\" ring(iii)Gear shifter(iv)Servicing of gears(v)Replacement of gear oil NO 460(vi)Servicing of dozer shifterNote: Servicing to be carried out by authorised distributor or manufacturer of the said dosing system. A certificate to be produced in original from distributor / manufacturer after satisfactorily completion of specified works. |
| 17 | Dismantling of unserviceable induction motor from the top on the chlorine tank and transporting it to authorised workshop for repair of capacity 0.5 to 1 HP, 3 phase, 415 V, 1440 RPM from pump Houses at various location/Yard in Cantt area and carrying out necessary repairs/renewal of parts of motor and refixing the same after repairs including testing complete all as specified and as directed. Note:- Required accessories & parts shall be paid separately under respective item. |
| 18 | Cutting of existing burn/unserviceable winding, cleaning of slot, and re-winding of induction motor of any make with same size of super enamelled copper winding wire, varnishing , backing complete all as specified and directed. |
| 19 | Supply only water seal and packing complete all as specified anddirected. |
| 20 | Supply only driven end bearing of pump shaft complete all as specified anddirected. |
| 21 | Supply only Non driven end bearing of pump shaft complete all as specified anddirected. |
| 22 | Supply only cooling fan complete all as specified anddirected. |
| 23 | Supply only cooling fan cover complete all as specified anddirected. |
| 24 | Supply only connection plate complete all as specified anddirected. |
| 25 | S&F unplasticized PVC pipe of pressure rating 10kg/Sq.cm fixed to wall/ceiling or in floors etc, of size 15 mm bore complete all as specified anddirected. |
| 26 | S & F ball brass valves, high pressure, with polyethene float and fly nut complete screwed for iron pipe of size 15 mm bore dia complete all as specified and directed. |
| 27 | Collecting sample of water in sample bottlesin different pockets of New Cantt area Prayagraj and testing of water sample in respect of the following parameters, to get it tested from State Public health laboratory or NABL Accredited Lab, complete all as specified and directed .Note : The parameter to be tested as per IS :10500-2012 : shall be Colour, Odour, turbidity, Ph value, Total dissolved solids, Aluminium, Ammonia, detergents, Barium, Boron, Calcium, Chloramines, Chloride, Copper Fluoride, Free Residual chlorine, Iron , Magnesium, Manganese , Mineral Oil, Nitrates, Silver, Sulphate, Sulphide. |
| 28 | Supply only selector switch for Volt meter and ammeter, complete for chlorine dosing plant, complete all as specified and directed |
| 29 | Supply only chlorine testkit with coloured ample, testing tube and OT solution with Rexene finish box, complete all as specified and directed. Make : T &C /Purichlor/Aquapura |
| 30 | Supply only OT solution for testing of water sample complete all as specified and directed. MakeT &C /Purichlor/Aquapura |
| 31 | Supply only liquid chlorine sodium hypochlorite (Grade-I) drinking water with 9% chlorine contents by volume conforming to IS-11673 in sealed non-chemical reacting/ oxidation LDPE containers of 6 kg PVC tanks, as required on monthly basis with manufacturer\"s chlorine test certificate and manufacturer\"s date marked not more than 02 week old , complete all as specified and directed.NOTES:- (i) Approval of chemical (sodium hypochlorite) shall be given after verification of test certificates of chemical of various manufactures and other factors like chemical and safety and health hazard aspects of usage of chlorination(ii) The brand/make of the chlorination of chemical must be stated before procurement and certified by govt laboratory that it is free from the technical strength stability health safety and operation point of view this product is used for drinking water applications for consumption by humans and the brand /make of calcium hypochlorite is suitable for drinking water chlorination and its sample has been tested by Govt Laboratory. |
| 32 | Disconnection of submersible pump set of any capacity from existing bore well system, disconnection of water supply & electric connection and taking out the unserviceable pump set from bore well with connected lowering pipe line of any size with manual or suitable electric driven with chain pulley block upto 210 feet deep & re-assembling after necessary repair and re-lowering the pump set in same bore well & re-connection of electric & water connection for entire satisfaction of Engineer-in-Charge complete as directed.Note:(i) Repair/ rewinding of pump set will be paid separately.ii) All type of tool required to complete thejob will be arranged by contractor.iii) Job will be done round O-Clock continued as per site requirement as directed by Engineer-in-Charge.iv) Delay in job will be charged on the basis of Rs. 100/- per hour after completion of 12 Hrs from its initiation.v)Items required for motor connection such as PVC insulation tape, Vulcanised rubber / puncture tube etc will be provided by the contractor to complete the work and rate as deemed to be quoted in unit rate no extra payment will be paid to the contractor. |
| 33 | M & L for cutting out the existing winding of submersible motor & stator of capacity 30/33 HP any make and re-winding with the same size of copper winding wire as per existing gauge and number of turns (Coils) and necessary filling of varnish of best quality for proper insulation with entire satisfaction of Engineer-in-Charge. Note:- Winding work shall be doneat contractor\"s workshops & the cost of transportation of pump from site to workshop & back shall be included in quoted rate .(ii)Necessary parts & connected repairing / servicing shall be measured & paid separately under respective Srlitem Nos from 34 to 57 here-in-after. |
| 34 | Labour only for Straightening of the slots (any number) of stator of submersible motor of any make complete all as specified and directed. |
| 35 | Supply onlythrust bearing block complete for submersible motor of any make complete all as specified and directed. |
| 36 | Supply only gun metal bushes for submersible motor as per manufacturer\"s design and specification of required size as directed by Engineer-in-charge. |
| 37 | Supply only sand guard of submersible motor to match the existing size & capacity to prevent the sand protector of pump of same size & type as directed. |
| 38 | Supply only sleeves of end plates of submersible motor to match the existing shape & size complete all as specified and directed. |
| 39 | Supply only cable grommet to match the existing size complete all as specified and directed. |
| 40 | Supply only water seal to prevent leakage of water complete all as specified and directed. |
| 41 | Supply only studs with nuts of required length & dia complete all as specified and directed. |
| 42 | Supply & fixing shaft of submersible motor and filling or re-metalling of metal on shaft of motor, turning or grinding in lathe machine to bring it to original size and shape and polishing & fixing shaft on submersible motor complete all as specified and directed. |
| 43 | Supply & fixing coupling of submersible motor and pump with key complete as specified & directed. |
| 44 | M&L for welding [Gas] of broken shaft and jointing of broken motor shaft with new piece, making key slot, grinding to make coupling size and balancing the rotor complete as specified & directed. |
| 45 | M&L for complete over hauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs tobowl assembly, re-threading of worn out studs holes and providing suitable size studs with nuts complete as specified & directed by Engineer-in-Charge |
| 46 | Supply only bowl bushes to match the same size & type for smooth functioning complete as specified & directed. |
| 47 | Supply only neck ring of same size & type complete as specified & directed. |
| 48 | Supply only steel distance pieces & key complete as specified & directed. |
| 49 | Supply only impellor stainless steel / gun metal as per existing size & shape complete |
| 50 | Supply only cast iron bowl for submersible pump to match the existing size & type complete as specified & directed. |
| 51 | Supply only cast iron non return valve of 100 mm bore pipe complete as specified & directed. |
| 52 | Supply only stainless steel pump shaft of submersible pump complete as specified & directed. |
| 53 | Supply only cast iron Head Extension complete as specified & directed. |
| 54 | Supply only cast Iron Inlet body of pump complete as specified & directed. |
| 55 | Supply only wedges of slots to match the existing slots complete as specified & directed. |
| 56 | Material & Labour for cable jointing of 3 core cable of any size by using puncture compound roll & tape / Sealing compound complete as specified & directed. |
| 57 | Material & Labour two coat painting of Motor and pump with synthetic enamel paint (Hammer tone finish)with spray machine complete as specified & directed. |
| 58 | Material & Labour for cutting out the existing winding of submersible motor & stator of capacity 40/41 HP any make and re-winding with the same size of copper winding wire as per existing gauge and number of turns (Coils) and necessary filling of varnish of best quality for proper insulation with entire satisfaction complete all as specified &directed. Note:- Winding work shall be doneat contractor\"s workshops & the cost of transportation of pump from site to workshop & back shall be included in quoted rate .(ii)Necessary parts & connected repairing/ servicing shall be measured & paid separately under respective Srlitem Nos from59 to 82 here-in- after. |
| 59 | Labour only for Straightening of the slots (any number) of stator of submersible motor of any make complete all as specified &directed. |
| 60 | Supply only thrust bearing block complete for submersible motor of any make as directedby Engineer-in-charge. |
| 61 | Supply onlygun metal bushes for submersible motor as per manufacturer\"s design and specification of required size complete all as specified &directed. |
| 62 | Supply only sand guard of submersible motor to match the existing size & capacity to prevent the sand protector of pump of same size & type complete all as specified &directed. |
| 63 | Supply only sleeves of end plates of submersible motor to match the complete all as specified &directed. |
| 64 | Supply only cable grommet to match the existing size complete all as specified &directed. |
| 65 | Supply only water seal to prevent leakage of water complete all as specified &directed |
| 66 | Supply only studs with nuts of required length & dia complete all as specified &directed. |
| 67 | Material & Labour for shaft of submersible motor and filling or re-metalling of metal on shaft of motor, turning or grinding in lathe machine to bring it to original size and shape and polishing & fixing shaft on submersible motor complete as directed to entire satisfaction of Engineer-in-Charge. |
| 68 | Supply & fixing coupling of submersible motor and pump with key complete all as specified &directed.. |
| 69 | M&L for gas welding [Gas] of broken shaft and jointing of broken motor shaft with new piece, making key slot, grinding to make coupling size and balancing the rotor complete as specified & directed by Engineer-in-Charge. |
| 70 | Complete over hauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs tobowl assembly, re-threading of worn out studs holes and proving suitable size studs with nuts complete as specified & directed by Engineer-in-Charge. |
| 71 | Supply only bowl bushes to match the same size & type for smooth functioning completeall as specified &directed. |
| 72 | Supply only neck ring of same size & type complete all as specified &directed. |
| 73 | Supply only steel distance pieces & key complete all as specified &directed. |
| 74 | Supply only impeller stainless steel / gun metal as per existing size & shape complete all as specified &directed. |
| 75 | Supply only cast iron bowl for submersible pump to match the existing size & type complete all as specified &directed. |
| 76 | Supply & fixing in repair of cast iron non return valve of 150 mm bore pipe complete all as specified &directed. |
| 77 | Supply only stainless steel pump shaft of submersible pump complete all as specified &directed. |
| 78 | Supply only cast iron Head Extension complete all as specified &directed. |
| 79 | Supply only cast Iron Inlet body of pump complete all as specified &directed. |
| 80 | Supply only wedges of slots to match the existing slots complete all as specified &directed. |
| 81 | Material & Labour for cable jointing of 3 core cable of any size by using puncture compound roll & tape / Sealing compound complete all as specified &directed. |
| 82 | Material & Labour two coat painting of Motor and pump with synthetic enamel paint (Hammor tone finish)with spray machine completeall as specified &directed. |
| 83 | Material & Labour for cutting out the existing winding of submersible motor & stator of capacity 1 to 3 HP any make and re-winding with the same size of copper winding wire as per existing gauge and number of turns (Coils) and necessary filling of varnish of best quality for proper insulation with entire satisfaction of Engineer-in-Charge complete all as specified &directed. Note:- (i) Contractor shall be done winding work at their workshops the cost of transportation of pump from site to workshop & back shall be included in quoted rate) as specified &directed by Engineer-in-Charge. (ii) Necessary parts & connected repairing / servicing shall be measured & paid separately under respective Srlitem Nos from 84 to 107 here-in- after. |
| 84 | Labour only for Straightening of the slots (any number) of stator of submersible motor of any make complete all as specified &directed. |
| 85 | Supply only thrust bearing block complete for submersible motor of any make complete all as specified &directed. |
| 86 | Supply only gun metal bushes for submersible motor as per manufacturer\"s design and specification of required size complete all as specified &directed. |
| 87 | Supply only sand guard of submersible motor to match the existing size & capacity to prevent the sand protector of pump of same size & type complete all as specified &directed. |
| 88 | Supply only sleeves of end plates of submersible motor to match the existing shape & size complete all as specified &directed. |
| 89 | Supply only cable grommet to match the existing size complete all as specified &directed. |
| 90 | Supply only water seal to prevent leakage of water complete all as specified &directed. |
| 91 | Supply only studs with nuts of required length & dia complete all as specified &directed. |
| 92 | Material & Labour for shaft of submersible motor and filling or re-metalling of metal on shaft of motor, turning or grinding in lathe machine to bring it to original size and shape and polishing & fixing shaft on submersible motor complete as directed to entire satisfaction of Engineer-in-Charge. |
| 93 | Supply & fixing coupling of submersible motor and pump with key complete all as specified &directed. |
| 94 | Welding [Gas] of broken shaft and jointing of broken motor shaft with new piece, making key slot, grinding to make coupling size and balancing the rotor complete as specified & directed. |
| 95 | Complete over hauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs tobowl assembly, re-threading of worn out studs holes and proving suitable size studs with nuts complete as specified & directed. |
| 96 | Supply only bowl bushes to match the same size & type for smooth functioning complete all as specified &directed. |
| 97 | Supply only neck ring of same size & type complete all as specified &directed. |
| 98 | Supply only steel distance pieces & key complete all as specified &directed. |
| 99 | Supply only impeller stainless steel / gun metal as per existing size & shape complete all as specified &directed. |
| 100 | Supply only cast iron bowl for submersible pump to match the existing size & type complete all as specified &directed. |
| 101 | Supply only cast iron non return valve of 80 mm bore pipe complete as specified & directed. |
| 102 | Supply only stainless steel pump shaft of submersible pump complete all as specified &directed. |
| 103 | Supply only cast iron Head extension complete all as specified &directed. |
| 104 | Supply only cast Iron Inlet body of pump complete all as specified &directed. |
| 105 | Supply only wedges of slots to match the existing slots complete all as specified &directed. |
| 106 | Material & Labour for cable jointing of 3 core cable of any size by using puncture compound roll & tape / Sealing compound complete as directed by Engineer-in-Charge. |
| 107 | Material & Labour two coat painting of Motor and pump with synthetic enamel paint (Hammer tone finish)with spray machine complete to entire satisfaction of Engineer-in-Charge. |
| 108 | S&F in replacement of pressure pump boost water pressureand also improves flow rate of capacity 0.5 to 1 HP single phase 230 volt complete all as specified and directed. |
| 109 | S&F in replacement of3 to 5 HPhorizontal open well submersible pump with motor 2800 RPM single phase 230 volt complete all as specified and directed.Make: KSB/ CG. |
| 110 | S&F in replacement ofmonoblock pump of capacity 5 to 7.5 HPwith motor 2400 RPM three phase 230 volt complete all as specified and directed.Make: KSB/ CG. |
| 111 | M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to GI earth wire 4mm dia (7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed. |
| 112 | Supply & Fixing in repairsingle phase preventor to prevent against single phasing, reverse phasing with wiring & testing complete all as specified & directed.Make :Minilec / Electromed / L&T) |
| 113 | Material & Labour in repair faulty analog type ammeter from LT panel and removing from site Supply & Fixing three phase power ammeter Analogtype suitable for 0-100 Amps range, with suitable CT\"s ratio of size 96mm x 96mm size including necessary control wire connection and testing complete as specified & directed. Make : AE / Legrand / L&T / HPL |
| 114 | Material & Labour in repair faulty analog type Volt Meter from LT panel and removing from site Supply & Fixing three phase Volt Meter Analog type suitable for 0-500 Volt range of size 96mm x 96mm size including necessary control wire connection and testing complete as specified & directed. Make : AE / Legrand / L&T / HPL |
| 115 | Supply & Fixing in repair LED Indicator (RYB) colour with necessary wiring complete as specified & directed. |
| 116 | S&Fsubmersible pump of capacity 40/41 HP with electric driven motors of suitable capacity as per design 3 Phase 415 Volt with head 80 Mtr and discharge 1400 LPM complete installation and making electrical connection and testing complete to entire satisfaction of Engineer in charge |
| 117 | Repair & maintenance of diesel engine driven fire pump horizontal end suction with complete servicing/overhauling and complete replacement of centrifugalCI casing, bronze impeller & stainless steel shaft suitable for delivering 2850 LPM 70 mtr head complete all as specified and directed by Engr-in-Charge. Note:- Contractor shall submit requisite purchase voucher for replacement of such parts to Engr-in-charge. |
| 118 | Repair & maintenance of fire fighting coupled pump electrical drivenfire pump of capacity 55KW/75 HP and complete servicing/overhauling and complete replacement of centrifugalCI casing, bronze impeller & stainless steel shaft suitable for delivering 2850 LPM 70 mtr head and 2900 RPM complete all as specified and directed by Engr-in-Charge. Note:- Contractor shall submit requisite purchase voucher for replacement of such parts to Engr-in-charge |
| 119 | Repair and replacement of worn-out partsafter taking out from installation shifting to civil workshop rewinding motor cleaning greasing and refitting at installation to electric driven jockey motor withpumps delivering 180 LPM upto 70 mtr head and capacity 7.5HP complete all as specified and directed by Engr-in-Charge. |
| 120 | Supply & Fixing in repair PVC Insulated & sheathed heavy duty submersible cable flat, fully water proof multi-stranded copper conductor cable 16 Sqmm 3 core, 1100 volts grade,ISI Marked complete all as specified & directed. |
| 121 | Supply & Fixing in repair MCCB 4 pole 63 Amp breaking capacity 25 KA in sheet metal enclosure including connecting to existing cable complete all as specified & directed. |
| 122 | Supply & Fixing in repair MCCB 4 pole 100 Amp breaking capacity 25 KA in sheet metal enclosure including connecting to existing cable complete all as specified & directed |
| 123 | Supply & fixing in repair contactor ML-2, 3 pole, 415 Volt, 16-25 Amps rating Cat No. SS90701 Make L&T or equivalent make as approved by GE. |
| 124 | Supply & fixing in repair contactor ML-3, 3 pole, 415 Volt, 25-40 Amps rating Cat No. SS90721 Make L&T or equivalent make as approved by GE. |
| 125 | Supply & fixing in repair contactor ML-4, 3 pole, 415 Volt, 70 Amps rating Cat No. SS90722 Make L&T or equivalent make as approved by GE. |
| 126 | Supply & fixing mild steel nut bolts & washers hexagonal or square half or full threaded 10-12 mm dia and 75-100 mm long complete all as specified & directed. |
| 127 | Supply & fixing in repair rubber gasket3 mm thick packing ring suitable for 100-150 bore flange pipe cut type complete all as specified & directed. |
| 128 | Supply & fixing in repair 100 mm bore MS column pipe in three metre length having wall thickness 5.4 mm with both ends flanged and drilled 6 to 8 holes with flange packing nut bolts & washers of suitable size complete all as specified & directed. |
| 129 | Supply & fixing in repair 150 mm bore MS column pipe in three metre length having wall thickness 5.4 mm with both ends flanged and drilled 6 to 8 holes with flange packing nut bolts & washers of suitable size complete all as specified & directed. |
| 130 | S&F in replacement of submersible pump of capacity 30/33 HP with electric driven motors of suitable capacity as per design 3 Phase 415 Volt with head 80 Mtr and discharge 1000 LPM to 2800 LPM complete installation and making electrical connection and testing complete to entire satisfaction of Engineer in charge |
| 131 | Supply & fixing in repair commissioning & testing complete of DIGITAL WATER LEVEL INDICATION DEVICE, operating on single phase supply direct display in 19 mm size digital system in meter or cm of water over head tank ensuring alarm while water fall or rise over pre-determined limit with the following description : the entire unit must operate through a compact electronic circuit, which must ensure reliable operation at 230 Volt + 5% with reliable in digit display and alarm at low and high level or over head tank complete as directed by Engineer-in-Charge.Make : SECO type DDS-2 / Surya / Akash / Phototron. |
| 132 | S&F in replacement of Aviation Obstruction light with LED Lamp with all accessories complete all as specified and directed. Make Bajaj/Havells/Crompton/Phillps |
| 133 | M&L for two core 1.5 sqmm copper conductor cable for connecting up aviation light to main switch complete all as specified and directed. |
| 134 | Supply & Fixing in repair PVC Insulated FR PVC round sheathed copper conductor multi-stranded round flexible cable 1100 volts with bright annealed electrolytic base copper conductor size 0.5 Sqmm 4 core confirming to IS : 694-1990 making necessary electric connection to water level indicator complete all as specified & directed. |
| 135 | Supply, installation, testing and commissioning in replacement of indoor type cubical panel board suitable for 3 phase, 4 wire, 415V, 50 Hz and CPRI approved manufacturerfactory fabricated with CRCA sheet not less than 3 mm thick having modern fabrication process powder coating in approved shade provided with suitable gasket to make it dust and vermin proof and general constructions conforming to IS : 8623/93. The LT panel shall be front and back openable and duly compartmentalized for each control gears. The panel should have suitable size of aluminium Bus -bar three phase 4 wire system having current carrying capacity 400 Amps of the incomer MCCB. The panel should have the following incoming and out going controls duly fixed with the panel by means of suitable link plates complete all as specified and as directed by Engineer -in-charge. (PCC platform of suitable size for mounting the LT Panel is deemed to be included in the quoted rate) |
| 136 | (i) MCCB 4, pole 35 KA with adjustable thermal setting, 415V, 160 Amp- 01 No. (ii) MCCB 4, pole 35 KA with adjustable thermal setting, 415V, 100 Amp- 01 No(iii)Star delta starter comprising suitable size of 3 pole contactors for 40 HP submersible pump with thermal over load relay complete - 01 No(iv) Motor protection relay for single phase, over load, over voltage (v)Digital Volt meter 0-500 volts(vi)Ammeter 0-500 amps with suitable size of Cts(vii) All connections to be done through suitable size PVC insulated copper cables(viii) LED RYB indicator - 01 Set(ix)MCB\" TP 32 Amps 10 KA - 01 No (X)MCB SPN 32 Amps 10 KA - 01 No(xi) Single phase preventer - 01 NoMake of MCCB, MCB & Contactor:L&T (MNX Series), Hagger, Siemens, |
| 137 | Provision for bacteriological test and sample collection from STP New Cantt in sterilized bottle and testing shall be done from Government lab/ lab approved by UP Pollution Control Board, on monthly basis as per the environment (Protection) Rule-1985 in Sch-1, complete all as specified and as directed. The following shall be the permissible limits for reuse of water effluent from sewage treatment as for use in inland surface :-(a) Suspended solids (max) <50 mg/litre(b) pH value (6.5 to 9.0)(c) Bio chemical oxygen demand (B.O.D) (5 days at 20 ºC (max)) <30.(d) C.O.D. (chemical oxygen demand) upto 250mg/litre(e) Faecal coliform (FC) in the form of probable No per 100 millimeter (MPN/100ml)<1000. |
| 138 | S & Fin replacement , connecting, testing and commissioning Direct Online Starter with three phase protection relay range 11-18 Amp suitable for upto7.5 HP, 3 Phase, 415 volts, 50 HZ, having all standard accessories complete all as specified and directed. MAKE: Shneider/ L&T/ Legrand/ Standard. |
| 139 | M&L for painting of panel boardwith one coat of synthetic enamel paint including preparation of the existing surface including scratching of old paintwherever required , rubbing & cleaning of the greasy spotby means of kerosene oil or other suitable chemicalwith safety precaution& all disconnectedelectrical connections are connected and before painting shut down complete all as specified & directed. |
| 140 | M&L for preparation of old painted surfaces of steel surfaces such assheets,filters, compressor, pipelines, mild steel ladders, Column pipes any size of STP, over 10cm width or girth and applying onecoat of synthetic enamel paintcomplete all as specified and directed. |
| 141 | S&F High pressure single head chemical dosing system. power input 230V, 50Hz, 40 SPM, 1/30 fractional horse power, pressure 5kg/Sqcm, max output 6.5 ltr with accessories like lead tubing, connecting ferrule, check valve : preparation tank model AQUA1005 of net capacity 170 ltrs FRP dosing tank dia 650 x net height 375+ conical 300 mm, gross height with standard 1000mm consisting of water inlet line, outlet strainer, drain, overflow, conical bottom of sludge deposition, pot hole with cover, Agitator 120 watt 900 RPM single phase flange mounted motor with plastic shaft and impeller complete. Note - Provide one service tank of capacity -100 Ltr , and mixing tank capacity of170 Ltr both tank with aviator motorcomplete all as directed , and making electric connection and testing complete to entire satisfaction of Engr-in-charge |
| 142 | S&Fsubmersible pump of capacity 20/25 HP with electric driven motors of suitable capacity as per design 3 Phase 415 Volt with head 80 Mtr and discharge 800 LPM complete installation and making electrical connection and testing complete to entire satisfaction of Engineer in charge |
| 143 | M&L in replacement of directly operated thermal overload relay range 16-32 Amp.Make: L&T , Schnider, Havells |
| 144 | S&F of sluice valve heavy duty both ends flanged and drilled type nominal pressured rating PN-1.6, conformed to IS 780 of 1980 complete with cast iron body bonnet wedge stuffing box galvanised thrust plate, spindle made of high tensile stainless steel cast iron hand operated wheel with cap top nuts, bolts. washers wedge nut body seal ring and wedge facing run lead tin braise, compressed fibre bolts and nuts, gland packing of superior quality including 6mm thick rubber gasket jointincluding taking down and complete of following sizes:-. |
| 145 | 80mm bore |
| 146 | 100mm bore |
| 147 | 150mm bore |
| 148 | 250 mm bore |
| 149 | Supply, laying, jointing & testing for 80 mm bore galvanizedsteel water tubes, \"medium grade\", galvanized with new fittings & accessories such as Tee,elbow,bend,socket,reducer etc ,laid in trenches including taking out old/ unserviceable existing pipecomplete all asspecified & directed.NOTE :Excavation and earth work shall be measured and paid separately under respective items of BoQ. |
| 150 | Supply, laying only, jointing & testing for 50 mm bore galvanizedsteel water tubes, \"medium grade\", galvanized taking out old/ unserviceable existing pipecomplete all asspecified & directed. NOTE : Excavation and earth work shall be measured and paid separately under respective items of BoQ. |
| 151 | Supply, laying only, jointing & testing for 40 mm bore galvanizedsteel water tubes, \"medium grade\", galvanized with new fittings & accessories such as Tee, elbow, bend, socket, reducer etc, laid in trenches including taking out old/ unserviceable existing pipecomplete all asspecified & directed. NOTE :Excavation and earth work shall be measured and paid separately under respective items of BoQ. |
| 152 | Supply, laying only, jointing & testing for 25 mm bore galvanizedsteel water tubes, \"medium grade\", galvanized with new fittings & accessories such as Tee, elbow, bend, socket, reducer etc, laid in trenches including taking out old/ unserviceable existing pipecomplete all asspecified & directed. NOTE :Excavation and earth work shall be measured and paid separately under respective items of BoQ. |
| 153 | Supply, laying, jointing & testing for 20 mm bore of galvanizedsteel water tubes, \"medium grade\", ISI marked, galvanized with fittings & accessories such as Tee, elbow, bend, socket, reducer etc, laid in trenches including taking out old/ unserviceable existing pipecomplete all asspecified & directed.NOTE:Excavation and earth work shall be measured and paid separately under respective items of BoQ. |
| 154 | Supply, laying, jointing & testing for 15 mm bore of galvanizedsteel water tubes, \"medium grade\", ISI marked, galvanized with fittings & accessories such as Tee, elbow, bend, socket, reducer etc, laid in trenches including taking out old/ unserviceable existing pipecomplete all asspecified & directed.NOTE:Excavation and earth work shall be measured and paid separately under respective items of BoQ. |
| 155 | Supply and fixing in replacement Gun-metal gate valve with iron wheel head, screwed both ends for iron pipe of size 15mm bore complete all asspecified & directed.. |
| 156 | Supply and fixing in replacement Gun-metal gate valve with iron wheel head, screwed both ends for iron pipe of size 20mm bore complete all asspecified & directed.. |
| 157 | Supply and fixing in replacement Gun-metal gate valve with iron wheel head, screwed both ends for iron pipe of size 25mm bore complete all asspecified & directed.. |
| 158 | Supply and fixing in replacement Gun-metal gate valve with iron wheel head, screwed both ends for iron pipe of size 40mm bore complete all asspecified & directed. |
| 159 | Supply and fix in replacement Gun-metal gate valve with iron wheel head, screwed both ends for iron pipe of size 50mm bore complete all asspecified & directed. . |
| 160 | Supply and fix sign boards of size 130x60x25cm back opening type made out .71mm thick aluminium sheet and 3mm thick acrylic sheet in front side including writing name of installation and providing 1x20 W tube light fitting with tube rod-02 Nos and necessary electrical connection from main and connecting to switch and fixing sign board at the entrance out side on existing pipe with necessary mild steel support claim of suitable size including dismantling the old unserviceable sign board all as directed by the EIC. |
| 161 | Supply fabricated and fixing display board made out of 3mm thick white acrylic transparent sheet of size 90x60cm fixed on wooden board 1mx1.5m indicating pump house layout showing motor/pump suction delivery line including valves, LT panel board etc and fix on wall including dismantling the old unserviceable boards all as directed by the EIC. |
| 162 | Excavation in trenches, not exceeding1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or laying of cables/pipes etc. and getting out in soft/loose soil complete all as specified and directed. |
| 163 | Cutting of road (bituminous/concrete) in trenches, not exceeding1.5 m wide and not exceeding 1.5 m in depth for shafts, valve pits, wells, cesspits, manholes, pier holes, laying of cables/pipes etc. not exceeding 1.5 m in depth and getting out in road cutting soil complete all as specified and directed. |
| 164 | Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed. |
| 165 | Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 166 | Schedule of Credit (MINUS) Rs. 121372.00 B/F from Serial Page No.[Note : Detailsof items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
