|
| 1 | Material and labour for cleaning of RCC underground/semi underground watersupply sump, static water tank of capacity 30000GLNS to 50000GLNS by dewatring and taking out all scales,dirts, mud. algae etc from inside the tank and from mouth of circulating pipes including and taking out sludge with help of diesel driven sludge pump of suitable capacity including washing of tank wall with bleaching powder solution and then with water and draining out sludge, water complete all as specified and as directed. |
| 2 | Description all as per item No 1.00 above but of capacity 51,000 GLNS to 1,00,000 GLNS |
| 3 | Description all as per item No 1.00 above but of capacity 1,50,000 GLNS to 2,00,000 GLNSNote Applicable to item No 1.00 to 3.00 : (i) Cleaning should be done by scraper and removing dirt with brush and washing with bleaching powder all as directed by Engr-in-Charge.(ii) The inlet and outlet / over flow pipe of sump should be cleaned properly and care should be taken to prevent entry of sludge into pipe line by blocking mouth of pipe.Any blockage of the inlet / outlet / overflow pipe line shall be cleaned by contractor at no extra cost.(iii) Date of cleaning \"CLEANED ON ___________ NEXT due DATE ______________\" should be painted with black and white paint as per Existing size.(iv) Tank / Sump capaciting \"CAPACITY ________ GLNS\" should be painted on tank as per existing size. |
| 4 | Material and labour for attending complaint for repair/replacement of rusted/broken pipe line, above ground level, removing leakage ofwater pipe lines of size 250 to 350 mm bore pipe of any description such as CI/DI/GIpipe line at any location under AGE E/M-II including necessary cutting, jointing, welding work, dewatering, including repairs with suitable flanges,rubber packing, lead wool or any other packing material complete all as specified and as directed by Engr-in-Charge at site |
| 5 | Description allas per Item No 4.00 above but for pipe lines of size 100 to 200mm bore . |
| 6 | Description all as per Item No 4.00 above but for pipe lines of size 40 to 80mm bore GI Pipe |
| 7 | Material and labour for attending complaint for repair/replacment of rusted/broken pipe line, in trench / under PCC flooring / under stone road, removing leakage ofwater pipe lines of size 250 to 350 mm Bore pipe of any description such as CI/DIpipe line at any location under AGE E/M-II including necessary welding work, excavation, earth work, dewatering, including repairs with suitable flanges, rubber packing,lead wool or any other packing material complete all as specified and as directed. |
| 8 | Description allas per Item No 7.00 above but for pipe lines of size 100 to 200mm bore. |
| 9 | Description all as per Item No 7.00 above but for pipe lines of size 40 to 80mm bore GI Pipe.Note for item No.4.00 to 9.00 :-i) Complaint will be notified to contractor on mobile phone at any time between 0800 hrs to 2200 hrs and will be rectified within 12 hours after notification, failing which Rs 500/- per day per complaint will be recovered ii)Cost for Excavation upto required depth, PCC demolition, earth work, PCC work if needed shall be carried out at site on priority with the required machinaries andmesured and paid under relavant items of schedule.Contractor should arrange manpower and machinaries on priority as per the direction of Engr-in-Charge at site.iii)Cost of Pipe, valves, GI Fittings and mechanical joints if needed shall be mesured and paid under relavant items of schedule. |
| 10 | Material and labour for ductile Iron pipes 350mm bore, class K-9 spigot and socket end suitable for and including push on rubber gasket joints & jointing material and pipe fittings as per site requirement incl taking down old pipeall as specified and directed at site by Engr-in-Charge. Make of Pipes :- Tata / Jindal /Electrosteel / Jai Balaji |
| 11 | Description all as per item ser No 10.00 above but pipes of size 300mm bore. |
| 12 | Description all as per item ser No 10.00 above but pipes of size 250mm bore. |
| 13 | Description all as per item ser No 10.00 above but pipes of size 200mm bore. |
| 14 | Description all as per item ser No 10.00 above but pipes of size 150mm bore. |
| 15 | Description all as per item ser No 10.00 above but pipes of size 100mm bore. |
| 16 | Material and labour for supply, laying,jointing and testing in replacement of MS ERW Pipes of 80mm dia including all fittings / specials in any lengths & welding, cutting , bending etc completelaid in trenches/in duct/along wall/floorincluding taking down old pipe completeall as specified and directed by Engr-in-Chage.Make of Pipes :- Tata/ Jindal/Surya / BST |
| 17 | Description all as per item ser No 16.00 above but pipes of size 100mm bore. |
| 18 | Description all as per item ser No 16.00 above but pipes of size 150mm bore. |
| 19 | Description all as per item ser No 16.00 above but pipes of size 200mm bore. |
| 20 | Description all as per item ser No 16.00 above but pipes of size 250mm bore. |
| 21 | Description all as per item ser No 16.00 above but pipes of size 300mm bore. |
| 22 | Material and labour for supply, laying, jointing and testing Cast iron pipes with spigot and socket ends centrifugally cast, class B, in anysituation, in trenches, along floor, under PCC of size 80mm bore incl rubber / run lead joint material, including taking down old pipe complete all as specified and directed by Engr-in-Charge.Make of Pipes :- Electrosteel/ Kejriwal / Kesoram / Kapilansh / Kalinga |
| 23 | Description all as per Item No 22 above but pipes of size 100mm dia. |
| 24 | Description all as per Item No 22 above but pipes of size 150mm dia. |
| 25 | Description all as per Item No 22 above but pipes of size 200mm dia. |
| 26 | Description all as per Item No 22 above but pipes of size 300mm dia. |
| 27 | Description all as per Item No 22 above but pipes of size 350mm dia -ditto- Note for Item No 10.00 to 27.00:-(i)Cost for Excavation upto required depth, PCC demolition, earth work, PCC work if needed shall be mesured and paid under relavant items of schedule.(ii)Contractor should arrange machinaries as per the direction of Engr-in-Charge at site without extra cost.(iii)Necessary cutting, grinding, welding work required at site will be included in the quoted rate. |
| 28 | Material and labour for excavation in trenches not exceding 1.5 m wide not exceding 1.5 m in depth and getting out in Hard/dense soil complete all as specified and as directed. |
| 29 | Material and labour for returning filling in, including spreading, levelling watering well ramming in layer n.exc 1.5 cm thick in soft/loose soil all as specified and as directed. |
| 30 | Material and labour for Removal of excavated materialto a distance n.exc 50m & deposited where directed and at a leval n.exc 1.5m above the starting point all as specified and as directed. |
| 31 | Dismantling of stone sett paving laid bedded and pointed in cement mortar of any description or thickness / depth complete all as specified and directed by Engr-in-Charge. |
| 32 | Demolition of cement concrete in ground floors and paving any type n exc 15 cm thickness ( below or above ground level) all as specified and directed. |
| 33 | Material and labour for cement concrete 1:4:8 type D-2 ( using 40 mm graded agg) as in sub base for stone sett paving complete all as specified and directed 100 mm thick, finished even and fair all as specified and directed. |
| 34 | Material and labourfor stone sett flooring with stone setts of size 200 to 150 mm long ,150 to 200 mm wide and 150 mm deep and sides dressed, bedded in cement mortar 1:3 joints 20 mm thick ; grouted in cement mortar 1:2complete all as specified and directed by Engr-in-Charge.Note: Setting of stone shall be done as per the existing pattern and shouldmatch with the existing finishes. |
| 35 | Description all as item no 34.00 above but except stone complete all as specified and directed by Engr-in-Charge. |
| 36 | Material and labour for flush pointing 20mm thick to stone sett paving any decription in cement mortar 1:3 with an admixture of metallic floor harder 5% by weight of cement all as specified an directed . |
| 37 | Removal of debris ( concrete, broken stone etc.) to location as directed (distance exceeding 1.5 KM but n. exc 5KM from the site ) and depositing where directed. |
| 38 | Supply and fix cast iron specials, bends any type, reducer and angle tapers, straight bends double socket etc , Tee pipes single branch all socketed and spigot CI upto 350mm dia including dismantling of old one. |
| 39 | Supply and laying tubes medium grade galvanised iron in trenches/wall /floor with all fittings such as tees, bends, unions, elbow, reducers, clamps, etcof size 50mm bore including taking down old pipe complete all as specified and as directed by Engr-in-Charge.MAKE :- Tata / Jindal / BSTNOTE :- Excavation, refilling, removing if required shall be carried out by the contractor and will be paid separately under respective item of sch. |
| 40 | Description all as per Item No 39.00 above but of size 40mm bore. |
| 41 | Description all as per Item No 39.00 above but of size 25mm bore. |
| 42 | Description all as per Item No-39.00 above but of size 20mm bore. |
| 43 | Description all as per Item No-39.00 above but of size 15mm bore. |
| 44 | Supply and fixingof gun metal gate valve, cast copper alloy, screwed down, high pressure with iron wheel handle, screwed both ends for iron pipe or unions of size 50mm dia incl taking down old gate valve any type all as specified and as directedMAKE :- Leader/BIR/Zoloto/Kirloskar/KartarNOTE :- (i) Cost included for any addition /alteration /adjustment of pipe for fitting of valve as required at site. |
| 45 | Description all as per Item No-44.00 above but of size 40mm bore. |
| 46 | Description all as per Item No-44.00 above but of size 25mm bore. |
| 47 | Description all as per Item No-44.00 above but of size 20mm bore. |
| 48 | Description all as per Item No-44.00 above but of size 15mm bore. |
| 49 | Supply and fixingof bib tap standard of PTMT any colour high pressure screwed for iron pipe of size 15mm dia incl taking down old tapcomplete all as specified and as directed.MAKE :- Jaypee / Jaguar / PrayagNOTE :- (i) Cost included for any addition /alteration /adjustment of pipe for fitting of tap as required at site. |
| 50 | Description all as per Item No. 49.00 above but of size 20mm bore. |
| 51 | Supply and fixingof ball brass valves, high pressure, with polythene float and flynut with screwed iron pipe of size 15mm dia incl taking down old valve complete all as specified and as directed.MAKE :- Jaypee / Jaguar / Prayag NOTE :- (i) Cost included for any addition /alteration /adjustment of pipe for fitting of valve as required at site. |
| 52 | Description all as per Item No.51.00 above but of size 20mm bore. |
| 53 | Supply and laying along wall/floor/ceiling 3-layer PP-R (P o l y p r o p y l e n e random copolymer) pipes (PN16) UV stabilized suitable for hot & cold water supply including all PP-R plain & p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. of dia 25mm (OD) including taking down old pipes all as directed by Engr-in-Charge at site. MAKE :- Prince pipe fittings Ltd/Finolex / Supreme |
| 54 | Description all as per item No 53.00 above but dia 40mm (OD) |
| 55 | Description all as per item No 53.00 above but dia 50mm (OD) |
| 56 | Supply and fix cast iron non return valve suitable for 150 mm bore pipe with bypass arrengementDouble flanged swing type as per IS-5312 (Part I) of pressure rating PN 1.6, incl ofgasket , nutbolts and washer etc & removal of Unsv NRV complete all as specified and directed. MAKE :- Leader / Kirloskar / L&T |
| 57 | Supply and fix cast iron sluice valve of size 300mm dia with flanged ends drilled of class PN 1.6 with SS spindle complete with rubber gasket 6mm thick ,nuts bolts and washers etc complete including taking out old unserviceable sluice valve complete all as specified and as directed by Engr-in-Charge. Make of Valves :- Kirloskar / BIR/ Kartar/ L&T |
| 58 | Description all as per item No 57.00 above but size 200mm dia |
| 59 | Description allas per item No 57.00 above but size 150mm dia |
| 60 | Description allas per item No 57.00 above but size 100mm dia |
| 61 | Description allas per item No 57.00 above but size 80mm diaNote for Item No 57.00 to 61.00 :-(i)Rates include for necessary repair of valve chamber which got damaged during the fittings of valve. (ii)Cost included for any addition /alteration /adjustment of pipe/ valvefor fitting of valve as required at site. |
| 62 | Supply and fix cast iron foot valve of size 200 mm dia with flanged end including rubber gaskits , nut bolts,and washers etc complete including taking out old unserviceable foot valveall as specified and as directed.MAKE :-Upadhyay / Kirloskar / Leader |
| 63 | Description all as per item No 62.00 above but size 150mm dia |
| 64 | Supply and fix cast iron air valve of size 50/80 mm dia with flanged end including rubber gaskits , nut bolts,and washers etc complete including taking out old unserviceable air valve all as specified and as directed.MAKE :- Kirloskar / Leader / BIR/ L&T |
| 65 | Material and labour for replacement of Mechanicaljoint coller coupling long sleeve with rubber washer, mild steel screw bolts (machine made) with both ends screwed of dia as per flange hole and required lengtheach screwed end to be fitted with washers and hexagonal nut suitable for 100mm CI/DI/MS pipe inclunding taking down old joint complete all as directed. |
| 66 | Description all as per item No 65.00 above but of size 150mm bore |
| 67 | Description all as per item No 65.00 above but of size 200mm bore |
| 68 | Description all as per item No 65.00 above but of size 250mm bore |
| 69 | Description all as per item No 65.00 above but of size 300mm bore |
| 70 | Description all as per item No 65.00 above but of size 350mm bore |
| 71 | Supply, installation, commissioning and testing of water level indicator for water sump and over head tanks at various locations under AGE E/M-II as per following specification:-(a) Level monitoring display unit, LED indication display for level of tank for 25%, 50%, 75% and 100 % filling of tank, after 100% level hooter alarm sound for 15 seconds all as specified and as directed. (b) Contact free sensors for water level sensing in sump or tank, connected with display board with wire complete. (c) Sensor mounting assembly in sump or tank.NOTE :- (i) Rates include for dismantling of old unsv level indicator any type and any addition/alteration required for installation of new level indicator. |
| 72 | Material and labour for firing in repairs of mild steel brackets, frames , supports channel and stands of type as required made out of angle iron, channel, flat or strip of grade Fe-410-S of any size as per site requirement etc complete with painting two coat with synthetic enemel paint over a coat of red oxide all as specified and as directed by Engr-in-charge . |
| 73 | Material and labourfor cement concrete work in foundation, filling, mass concreteby using 40 mm graded aggregate type B2 of ratio 1;2;4for fixing MS channels for support CI/MS water pipes at any sloping area all as directed by Engr-in- Charge. NOTE : - Any excavation/returning and filling/removal work of soil is to be paid under relevant items. |
