Tender For Additional / Alternator To Certain Smq At Af Stn Bhisiana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Sep 2024
0 days left
EMD
87651
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhisiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Additional / Alternator To Certain Smq At Af Stn Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster of any description and any thickness on brick ,concrete or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engineer in Charge. |
| 2 | M&L for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and fair etc. complete all as specified and directed by Engineer in Charge. |
| 3 | M&L for rendering 12 mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair etc, complete all as specified and directed by Engineer in Charge. |
| 4 | M&L for rendering 5 mm thick cement plaster in CM(1:3) on fair faces ofconcrete surfaces in ceiling, complete all as specified and directed by Engineer in Charge. |
| 5 | M&L for rough cast plaster on brick wall consisting under coat of cement and sand mortar (1:4) not less than 10mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even, complete all as specified and directed by Engineer in Charge. |
| 6 | M&L for complete removal of existing treatment from walls, pillars, cornices upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plasteredsurfaces finally rubbed and smooth with sand paper and applying two coat of premium quality exterior emulsion paint over priming coat of exterior primer complete all as specified and directed by Engineer in Charge. |
| 7 | M&L for applying Two coats of premium quality exterior emulsion paint over new plastered/rough cast plastered surfaces of walls, pillars, cornices including priming coat of exterior primer complete all as specified and directed by Engineer in Charge. |
| 8 | M&L for prepration of new plastered surfaces of Ceiling and applying three coats of white wash on Ceiling ,complete all as specified and directed by Engineer in Charge. |
| 9 | M&L for Complete removal of existing treatmentand preparation of old plastered /unplastered surfaces of Ceiling and applying two coats of white wash on Ceiling , complete all as specified and directed by Engineer in Charge. |
| 10 | M&L for prepration of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed by Engineer in Charge. |
| 11 | M&L for Complete removal of existing treatmentand preparation of old plastered /unplastered surfaces of walls and applying two coats of white wash, complete all as specified and directed by Engineer in Charge. |
| 12 | M&L for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper acrylic, white or tinted over a coat ofprimer of same make complete all as specified and directed by Engineer in Charge. |
| 13 | M&L for Complete removal of existing treatment andpreparation of old plastered surfaces of walls and applying two coats of Oil bound distemper acrylic, white or tinted over a priming coat of same make on wall surfacesall as specified and directed by Engineer-in-Charge. |
| 14 | M&L applying 1-2 mm thick wall care putty (JK/Birla/berger) on walls, including making surface even and smooth using sand paper before applying Priming coat, complete all as specified and directed by Engineer in Charge. |
| 15 | Demolition of reinforced cement concrete of any description and in any position, cut as required to facilitate demolition, complete all as specified and directed by Engineer in Charge. |
| 16 | M&L for reinforced cement concrete Type-B-1, 1:2:4 ) 20mm graded aggregate as in roofs, floors, kitchen platform, beams,lintels, Columns, shelves, staircase, landing,parapets and railings and with similar suspanded works including necessary form work required at site and applying a coat of cement slurry over old surfaces of concrete to make perfect binding, complete all as specified and directed by Engineer in Charge. |
| 17 | Material and labour for providing precast cement concrete cover slabs using cement concrete Type B1 (1:2:4), 20 mm graded aggregate, (for manholes etc) and simillar works, complete all as specified and directed by Engineer in Charge. |
| 18 | Formwork to chullah hoods, shelves, chajjas, troughs and similar items in flats including edges complete all as specified and directed by Engineer in Charge. |
| 19 | M&L for mild steel TMTbars 8 to 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer in Charge. |
| 20 | All as per srl iten no 19 above but 6 to 8 mm dia complete all as specified and directed by Engineer in Charge. |
| 21 | S&F chicken wire mesh / hard drawn wire fabric of weight not exc 4 kg per sqm, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm sia complete all as specified and directed by Engineer in Charge. |
| 22 | Demolition of cement concrete unreinforcedof any description in any position not exceeding 150 mm thick (below or above ground level), complete all as specified and as directed by Engineer-in-charge. |
| 23 | Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protectionfinishing cement concrete surface even and fair without using extra cement, including making construction joint at a interval not exceeding 3.00 m and at each corner and filled with sealing compound with grade A(normal) in 25/30, complete all as specified and directed by Engineer in Charge. |
| 24 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer in Charge. |
| 25 | Material and labour for 25 mm thick cement concrete Type B1(1:2:4) (20 mm graded stone aggregate), as in sub base of floor , complete all as specified and directed by Engineer in Charge. |
| 26 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. including 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer in Charge. |
| 27 | M&L for Non skid coloured ceramic tiles/Rectified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified and directed by Engineer in Charge. |
| 28 | M&L for Non skid coloured ceramic tiles/Rectified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:3 to receive vertical tiles complete all as specified and directed by Engineer in Charge. |
| 29 | M&L for Glazed ceramic coloured tiles in vertical surface 350x250x7 mm / 450x350x7mm thick including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engineer in Charge. |
| 30 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed by Engineer in Charge. |
| 31 | Material and labour for Granite (of any Type) worktable rubbed and polished 18-20 mm thick machine cut,in steps, jams,pillars,window cills,cooking platforms and like laid and bedded over 15 mm thick cement mortar in CM(1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to macth with shade of granite, complete all as specified and directed by Engineer in Charge. |
| 32 | Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other simmilar situation , complete all as specified and directed by Engineer in Charge. |
| 33 | M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick screed bed of CM1:4 including rubbing and polishing complete all as specified and directed by Engineer in Charge. |
| 34 | M&L machine cut kota stone slab20-25mm thick in riser of steps ,skirting, dado and pillar laid over cement screed and cement slurry including 10mm thick cement plaster 1:3 CM to receive kota stone and jointedrubbing and polishing complete all as specified and directed by Engineer in Charge. |
| 35 | Demolition of cement concrete (unreinforced) exc 15 cm thickness but above ground floor, sunkan floor,complete all as specified and directed by Engineer in Charge. |
| 36 | M&L for 15 mm thick rendering in cement mortar (1:3) as in sunken portion walls and floor,mixed with water proofing compound 3%by weightof cement, finishing surfaces even & smooth without using extra cement complete all as specified and as directed. (Note :- water proofing compound shall be measured and paid under appropriate item of this Sch ‘A’) |
| 37 | Supplying only integral water proofing compoung, mixed as per instruction given over it (as per manufactures direction) , complete all as specified and directed by Engineer in Charge. |
| 38 | M&L for bitumen hot blown any grade, applied hot,intwo coats to concrete surfaces at the rate of 1.5 Kg per Sqm per coat, including cleaning of surfaces, complete all as specified and directed by Engineer in Charge. |
| 39 | Material and labour for laying 50 micron polythelene film, black in floors of sunkan, complete all as specified and directed by Engineer in Charge. |
| 40 | M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in fillingof sunken floorand mass concrete complete all as specified and directed by Engineer in Charge. |
| 41 | M&L for 50 mm diaGI spought pipefixed in sunken floors by means of cutting holes in wall/ taaking down old u/s pipe, fixed andbeded in cement mortor/PCC (1:2:4)and making good the disturbed portion of wall, complete all as specified and directed by Engineer in Charge. |
| 42 | Supply and fixed in repair PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cementcomplete all as specified and directed by Engineer in Charge. |
| 43 | supply and fixed in repair stack clamp for 75 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round round iron stay including bolt and nuts and securing ends of stay to walls or roof , complete all as specified and directed by Engineer in Charge. |
| 44 | supply and fixed in repair stack clamp for 100 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round round iron stay.including bolt and nuts and securing ends of stay to walls or roof , complete all as specified and directed by Engineer in Charge. |
| 45 | Dismantling of drain pipes including all fittings (AC/PVC)fixed wall/trenches upto 110mm dia complete all as specified and directed by Engineer in Charge. |
| 46 | S & F 110 mm bore PVC (SWR) pipes (Medium duty) single socketed in any length with rubber ring joints fixed to walls/floor with and including clamps, nut bolts including dismantling of old outlet pipe etc. complete all as specified and directed by Engineer in Charge. |
| 47 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer in Charge. |
| 48 | S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engineer in Charge. |
| 49 | S & F 75 mm bore PVC (SWR) pipes (Medium duty) single socketed in any length with rubber ring joints fixed to walls/floor with and including clamps, nut bolts including dismantling of old outlet pipe etc. complete all as specified and directed by Engineer in Charge. |
| 50 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer in Charge. |
| 51 | S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engineer in Charge. |
| 52 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 53 | Material and labour 15 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors , complete all as specified and directed. |
| 54 | Fixing only 15 mm dia steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required complete all as specified and directed by Engineer in Charge. |
| 55 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer in Charge. |
| 56 | Material and labour 20 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer in Charge. |
| 57 | Fixing only 20 mm dia steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required , complete all as specified and directed by Engineer in Charge. |
| 58 | Cutting chases, pining in making good to facing where required and pointing incement mortar 1:3 for concealed water tubing , cutting not exc 10 cm girth , complete all as specified and directed by Engineer in Charge. |
| 59 | Dismantling PVCwater tanksExc 250 Ltr and n exc 500 Ltr and removing to store, complete all as specified and directed by Engineer in Charge. |
| 60 | Material and labour, for three layered white colourRotational moulded polyethylene water storage tanks of 500 ltrCapacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed by Engineer in Charge. |
| 61 | Material and labour, 20mm Ballvalves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed as in repairs, complete all as specified and directed by Engineer in Charge. |
| 62 | Material and labour for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed Screwed both ends for iron pipes or for union and fixed in repairto 20mm dia of pipe,complete all as specified and directed by Engineer in Charge. |
| 63 | M&L Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed Screwed both ends for iron pipes or for union and fixed in repair to 15 mm dia of pipe, complete all as specified and directed by Engineer in Charge. |
| 64 | Material and labour Vitreous china squatting pan, \"Orissa\" pattern, size 580 x 440 mm white , with integral foot rests complete including provision of lime concrete bedding fixed as in repairs, complete all as specified and directed by Engineer in Charge. |
| 65 | Supply only PVC (SWR) \"P’ trap 100 mm bore, complete all as specified and directed by Engineer in Charge.(Note : Rate for fixing deemed to be included in the Quoted Unit Rate of item No 64) |
| 66 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass corner shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer in Charge. |
| 67 | Supply only PVC valveless , syphonic action type , flushing cistern, low level ,white, with inlet, ball valve, float and handle,completewith flush pipe of polythelene of low or high density or PVC 32 mm dia , including brackets / fastening assesoriesof 10 litres capacity ,fixed in repair,complete all as specified and as directed. (Note : Rate for fixing deemed to be included in the Quoted Unit Rate of item No 64) |
| 68 | S&F in repair for mirror cabinet ofmin size 430x330 mm with openable door shutteras approved by GE,, ccomplete all as specified and directed by Engineer in Charge. |
| 69 | S&F Vitreous China wash basin, white , flat back,size 550x400mm fixed onbrackets or stands, including 32 mm waste coupling of PTMT (half or full threaded)/ CP Brass and corrugated waste pipe with adopter of 900 mm long, fixed in repair, complete all as specified and directed by Engineer in Charge. |
| 70 | Supply and Fixed in repair wash hand basinBrass CP mixture 15mm bore for mixing hot and cold water screwed down for 15 mm iron pipe and fixed , complete all as specified and directed by Engineer in Charge. |
| 71 | Supply and Fixed in repair 15 mm dia bore CP angular stop cock/angle cock with wall flange cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union completeall as specified and as directed by Engineer-in-charge. |
| 72 | Supply and Fixed in repair15 mm dia bore CP concealed stop cock/angle cockcast copper alloy chromium plated with long sahnk , fancy type,screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union completeall as specified and as directed by Engineer-in-charge. |
| 73 | S&F Aqua guard nozzle tea valve fixing with 15mm bore GI pipe complete all as specified and directed by Engineer in Charge. |
| 74 | Supply and Fixed in repair PVC connections 15 mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engineer in Charge. |
| 75 | Supply and Fixed in repair PVC connections 15 mm size with PTMT nuts of length 600 mm,complete all as specified and directed by Engineer in Charge. |
| 76 | Supply and Fixed in repair, 15 mm diaBib taps ,fancy type Chromium plated, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer in Charge. |
| 77 | Supply and Fixed in repair, brass CP Wall mixer, 15 mm bore, for mixing hot and cold water , screwed down for iron pipe and fixed ,. complete all as specified and directed by Engineer in Charge. |
| 78 | Supply and Fixed in repair, wall mounted goose neck sink mixer( Hot and Cold)with provision of swivel arm , connecting legs and wall flanges, complete all as specified and directed by Engineer in Charge. |
| 79 | Supply and Fixed in repair, Brass Chromium plated shower rose 125 mm size with or without swivel joints,including fixing to steel pipe or union ,complete all as specified and directed by Engineer in Charge. |
| 80 | Supply and Fixed in repair, stainless steel soap dish ,complete all as specified and directed by Engineer in Charge. |
| 81 | Supply and Fixed in repair, Brass CP tubular towel rail of 20 mm dia, D type ,60 CM long between flange ,complete all as specified and directed by Engineer in Charge. |
| 82 | Supply and Fixed in repair, sinks made of stainless steel 1mm thick kitchen or labo-ratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm , including 40 mm bore dia CP waste coupling (half/full threaded with 900 mm and PVC waste pipe min 900 mm long complete all as specified and directed by Engineer in Charge. |
| 83 | Supply and fixing in repair Kitchen Plate rack withof size 750x600x250mm of stainless steel, complete all as specified and directed by Engineer in Charge. |
| 84 | Suply and Fixing coat hooks of six pegs made out of stainless steel 45 cm long (as per sample) , complete all as specified and directed by Engineer in Charge. |
| 85 | Dismentling of boarding in any position and in any description fixed with nail , complete all as specified and directed by Engineer in Charge. |
| 86 | Supply & Fixing of 18 mm thick PVC ply of Plain color fixed with screws, solvent cement/ adhesive to make cupboards, kitchen cabinet sides top and bottom and shelves inside the cabinets/cupboards complete as perspecifications and as directed by the engineer‐in‐charge. |
| 87 | Supply & Fixing of 18 mm thick PVC ply of one side Prelam/Rigidlam and other side balancing laminate colour to make cupbaord, kitchen cabinet Shutter/ drawer Front sides complete as per specifications and as directed by the engineer‐in‐charge. |
| 88 | Supply & Fixing of 5 mm thick PVC ply of plain white colour fixed with screws, solvent cement/ adhesive to make cupbaords, kitchen cabinet back covering and pull out drawer base complete as per specifications and as directed by the Engineer‐in‐charge. |
| 89 | Supply & Fixing for 20mm wide & 1mm thick PVC EDGE BEDDING of PVC pested on edges with suitable adhesive, complete all as specified and directed by Engineer in Charge. |
| 90 | Supply & Fixing of Ball bearing runners 45 mm Telescopic Channel ( 20 Inch ) full extension load capacity 50 kgs, complete all as specified and directed by Engineer in Charge. |
| 91 | Supply & Fixing of stainless steel handles 100 mm size for kitchen cabinet shutters, complete all as specified and directed by Engineer in Charge. |
| 92 | M&L Continous piano hingesstainless steel ,bright finish width of flaps when open 40 mm complete all as specified and directed by Engr-in-charge. |
| 93 | Supply and fixing Hasp and staple safety type aluminium powder coated with mild steel pin inculding bolt to hinge plate and fix with screws 150 mm size of hasps and staples complete all as specified and directed by Engineer in Charge . |
| 94 | Supply and fixing Magnetic catcherfor cupboards complete as all specified and directed by Engineer in Charge complete all as specified and directed by Engineer in Charge. |
| 95 | Supply and Fixed in repairMS powder coated Curtain Rods 18 to20 mm boreover doors and windows , with fixing MS powder coated brackets,including screws,rawal plug ,and PVC powder coated fineals / fency type end bulbs at each end of curtains rod, any colour etc complete all as specified and directed by Engineer in Charge. |
| 96 | Taking down Chowkhats or frames/ steel windows/ventilators, not exc 1.5 Sqm each(without taking off shutters from the frames) complete all as specified and directed by Engineer in Charge. |
| 97 | Taking down shutter of area exc 1 sqm but n exc 2 sqm each complete all as specified and directed by Engineer in Charge. |
| 98 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed by Engineer in Charge. |
| 99 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed by Engineer in Charge. |
| 100 | S&F 100 mm size stainless steel butt hinges complete all as specified and as directed by Engineer in Charge. |
| 101 | S&F 125 mm size stainless steel alloy handles, fabricated type, complete all as specified and as directed. |
| 102 | S&F 150 mm size stainless steel tower bolt, fabricated type, complete all as specified and as directed. |
| 103 | S&F steel window/ventilator of box section having 1.25 mm thick CRC sheetframe with double shutterinside gauged shutter and outsideglazed shutterwith one nos steel handle in each shutter,one nospeg stay in each shutter, complete with glazing bars and 08 Nos of 10 mm square guard bars in equal spacing, devoited or welded as per sample shown by Engr-in-Charge. (The rates includes 4 mm thick plain sheet glass and galvanized mild steelwire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and 2 coat of synthetic enamel paint over a red oxide primer) Note : The design of window to be facilitated by cooler fixing provision where ever reqd), complete all as specified and directed. |
| 104 | Taking down chowkats & shutters without taking offshutters from the frame, size of openingexc. 1.50 sqm but not exc 4 sqmeach. complete all as specified and directed by Engineer in Charge. |
| 105 | S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc complete all as specified and directedof size 125 X 60mm. . complete all as specified and directed by Engineer in Charge. |
| 106 | S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc complete all as specified and directedof size 105 X 60mm complete all as specified and directed by Engineer in Charge. |
| 107 | M&L for PCC (1:3:6) type C-1 using 20 mm graded agg as in back of pressed steel chowkhats etc complete all as specified and directed by Engineer in Charge. |
| 108 | M&L for PCC (1:2:4) type B2 using 20 mm graded agg as in hold fast of steel chowkhat/ frames etc complete all as specified and directed. |
| 109 | Supply and fixing, Factory made, 35mm thick plain framed panelled shutters (two panel) with lock rail and panelof 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces using 2nd class HW as in rail and style. The size of rail and style as per IS-1003 (part – I), kiln seasoned and chemically pressure treated,complete all as specified and directed by Engineer in Charge. |
| 110 | Supply and fixed 35mm thick glazed and skelton shutter IInd class hard wood ,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR part-1 , section 8 , clause 8.24(a) . complete all as specified and directed by Engineer in Charge. |
| 111 | Taking down shutter of any description exc 1.00 sqm but not exc 2.0 sqm each and refixing in same opening after easing and adjusting (Chowkat/frame changed) etccomplete all as specified and directed by Engineer in Charge. |
| 112 | S&F in repair 100 mm Butt hinges medium weight, cold rolled mild steel, complete all as specified and directed by Engineer in Charge. |
| 113 | S&F 150 Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer in Charge. |
| 114 | S&F 150 Aluminium anodised barrel tower bolts of extruded section and fixed in repair tower bolt complete all as specified and directed by Engineer in Charge. |
| 115 | S&F 300 mm aluminium ally, anodised , sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed ,complete all as specified and directed by Engineer in Charge. |
| 116 | S&F 300 mm aluminium ally, anodised , sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed in repair, complete all as specified and directed by Engineer in Charge. |
| 117 | S&F 150 mm extruded Aluminium alloy handles, fabricated typeanodised, complete all as specified and directed by Engineer in Charge. |
| 118 | S&F 150 mm extruded Aluminium alloy handles, fabricated typeanodised, fixed in repair handles complete all as specified and directed by Engineer in Charge. |
| 119 | S&F floor door stopper of size 140 mmof aluminium ally body and tongue, anodised, with hard drawn steel spring fixed in floors complete all as specified and directed by Engineer in Charge. |
| 120 | S&F mild steel300mm ordinary rat tail rod pattern springs, including roller and roller plate fixed in repairs complete all as specified and directed by Engineer in Charge. |
| 121 | S&F in repair of Aluminium body door cill upto 1mtr length at bottom part of door to stop entry of insect inside the room complete all as specified and directed by Engineer in Charge. |
| 122 | Supply and fixing Stainless steelwire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple complete all as specified and directed by Engineer in Charge. |
| 123 | Supply and fix in repair Stainless steelwire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple omplete all as specified and directed by Engineer in Charge. |
| 124 | M&L applying Two coats of Synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth |
| 125 | M&L Preparation of old wooden surface and applying one coat of synthetic enamel paint complete, all as specified and directed. |
| 126 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 |
| 127 | Material and labour for preparation of new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces complete all as specified and as directed |
| 128 | Material and labour for preparation of old steel surfaces of any description not otherwise described over 10cm width or grith and applying one coats of synthetic enamel paint overcomplete all as specified and as directed. |
| 129 | Taking down existing cement plaster/roof treatment including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 130 | M&l for providing cement concrete type BO (1:2:4) 12.5 mm graded stone aggregate for providing slope, maintain level, roof kerbs or mud stops rounded or chamfered edges all as directed by Engr-in charge. |
| 131 | M&L for 10mm thick Screed bed or bedding layer in cement mortar 1:4, laid on roof, mixed with water proofing compound when concrete is green, as per manufacturere instructions complete all as specified.(Note -Water proofing compound shall be measured and paid separately). |
| 132 | Supplying only integral water proofing compound, ISI marked complete all as specified and as directed. |
| 133 | M&L for APP based polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with forced application over roof surface with a coat of hot blown bitumen conforming to IS-3384-1965 of grade 85/25 @ 1.2 kg/Sqm at bottom of the membrane as bonding material, complete all as per manufacturer\"s instructions all as specified and directed by Engineer-in-Charge. |
| 134 | M&L for providing precast cement concrete louvres and jallies 25mm thick type B0 (1:2:4 using 12.5mm graded aggregate), (measured solid), including all mouldings etc complete all as specified and ditrcted. |
| 135 | Demolition of Brickwork or stone/ boulder masonary, built in cement mortar or cement lime mortar.complete all as specified and directed. |
| 136 | Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6 m mean radius , buit in cement mortar (1:6), complete all as specified and directed. |
| 137 | Material and labour for brick work with subclass B bricks, straight or curved on plan to anybradius in half brick thick wall, buit in cement mortar (1:4), complete all as specified and directed. |
| 138 | Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power, ceiling rose, pendent holders etc) completeincluding all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified & as directed by Engineer in Charge. |
| 139 | Taking down carefully UNSV main switch and DB\"s including MCBs of of any size make, type and capacity and depositing at site as directed by Engineer in Charge. |
| 140 | M&L for Concealed point wiringwith single core PVC insulated Multi Stranded copper conductor unsheathed 1100 volt grade cable of size 1.5 Sq mm (Nominal area) including non metallic rigid PVC conduit medium grade minimum 19mm dia , fixed on wall, ceiling/ roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.6mm MS Sheet with PVC top cover plate for mounting of fittings such as switches, sockets outlet, regulators etc and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with Multi stranded coper conductor of size 1.0 Sq mm (Nominal area) connected to common earth dolly complete all as specified and as directed by the Engineer in Charge for One light/fan controlled by one switch 6am one way:-.NOTE:- After rewiring cutting chasing portion should be matched with existing finishes of wall.s |
| 141 | All as per Item No 140 but forOne 3 pin switch socket combination 6 amp on the independent board. |
| 142 | All as per Item No 140 but for One 3 pin switch socket combination on same board with other switches. |
| 143 | All as per Item No 140 but for one Bell point controlled by 1 way switch 6 amp one way on same board with other switches or independent boardone way. |
| 144 | All as per Item No 140 but for One Light point controlled by Two-2way switches. |
| 145 | All as per Item No 140 but for point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board. |
| 146 | S&F modular white cover plate with frame, 1 module/ 2 module, complete all as specified and as directed by Engineer in Charge. |
| 147 | S&F modular white cover plate with frame, 3 module, complete all as specified and as directed by Engineer in Charge. |
| 148 | S&F modular white cover plate with frame, 6 module, complete all as specified and as directed by Engineer in Charge. |
| 149 | S&F modular white cover plate with frame, 8 module, complete all as specified and as directed by Engineer in Charge. |
| 150 | S&F Metal Flush boxes 1/2 module, complete all as specified and as directed by Engineer in Charge. |
| 151 | S&F Metal Flush boxes 3 module, complete all as specified and as directed by Engineer in Charge. |
| 152 | S&F Metal Flush boxes 6 module, complete all as specified and as directed by Engineer in Charge. |
| 153 | S&F Metal Flush boxes 8 module, complete all as specified and as directed by Engineer in Charge. |
| 154 | M&L modular switch 1 way 6 A, 1 module, complete all as specified and as directed by Engineer in Charge. |
| 155 | M&L modular bell push switch, 6 A, 1 module, complete all as specified and as directed by Engineer in Charge. |
| 156 | M&L modular socket, 6A- 3 pin combined, 2 module, complete all as specified and as directed by Engineer in Charge. |
| 157 | M&L modular switch16 Amps, 1 module with indicator, complete all as specified and as directed by Engineer in Charge. |
| 158 | M&L modular socket6 Amps & 16 Amps, 6 pin, 2 module, complete all as specified and as directed by Engineer in Charge. |
| 159 | S & F stepped Modulartype electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd, complete all as specified and as directed by Engineer in Charge. |
| 160 | M&L modular switch 2 way 6 A, 1 module, complete all as specified and as directed by Engineer in Charge. |
| 161 | S&F Bell Ding dong AC 230Volts single pole, complete al as specified and directed by Engineer in Charge. |
| 162 | S&F in repairs Ceiling rose 65x17mm three terminals PVC/ Poly carbonate isolated body, complete al as specified and directed by Engineer in Charge. |
| 163 | S&F 1X18 watt incl taking down wall mounted, new generation LED T-8 Retro fit for multipurpose application with LED Rod, made from exturded aluminium housing, polycarbonate diffuser including all fixing accessories & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge. |
| 164 | Taking down carefully copper / Aluminium wiring andremoving materials from site, complete al as specified and directed by Engineer in Charge. |
| 165 | S&F 1x10 watt incl taking down wall mounted, new generation LED batten for multipurpose application, made from exturded aluminium housing, polycarbonate diffuser including all fixing accessories & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge. |
| 166 | M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 6 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 6 sqmm cable alongwith one run of 6 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length, complete all as specified and directed by Engineer in Charge. |
| 167 | M&L for Hanging/ Fixing Ceiling fan of any sweep to same site after repair/ servicing including flexible cables from ceiling rose to fan, complete all as specified and directed by Engineer in Charge. |
| 168 | Fixing Exhaust fan of any size to same site after repair/ servicing including flexible cable from ceiling rose to fan, complete all as specified and directed by Engineer in Charge. |
| 169 | S&F Exhaust fan AC single phase metallic body 230V of size 300mm sweep including of making hole etc complete all as specified and directed by Engineer in Chartge. |
| 170 | S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp conceled in wall , complete all as specified and directed by Engineer in Charge. |
| 171 | S&F MCB DB TPN 4 Way vertical type factory made IP 43 protection class metal double door with Shrouded Neutral Bar & Pan assembly with connecting link complete including provision for fixing one MCCB upto 125A, complete all as specified and directed by Engineer in Charge. Note: MCB shall be measured and paid paid seperately under seperate item. |
| 172 | S&F MCB DB SPN 8 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed by Engineer in Charge. |
| 173 | Disconnecting electric and water conection and taking down carefully Geyser and deposited to AGE E/M store yard and refixing the geyser at same location, complete all as specified and directed by Engineer in Charge. |
| 174 | S&F MCCB 100 Amp 3P 16 Ka for fixing in DB complete all as specified and as directed by Engineer in Charge. |
| 175 | M&L for Meter Box of size 0.75mx0.60m of 0.30m width of MS Sheet of 3mm thickness and a clamping or supporting sheet inside for supporting of 4 Nos Meter and door with 1 Nos of transparent glass of 5mm thickness suitable for visibility of 4 Nos meter fixed on door with suitable arrangements. There should be 8 Nos hole for entering of 25mm dia pipe meter box shall be fixed in wall and necessary chiseling and make good of wall to be included in quoted cost. Drawing of meter box shall be approved by GE. Make: Universal/ SMS Panel/ PS&C. |
| 176 | S&F MCBs 240/415 Volts 10 KA finger proof terminal, B curve bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB .Make :- Legrand / Havells / Standard DB will be measured and paid separately complete all as specified and directed by Engineer in Charge. :- |
| 177 | (a) MCB C curve SPN 40Amps. |
| 178 | (b) MCB C curve SP 6 to 32 Amp. |
| 179 | M&L in repair earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand includinggalvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means ofnuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dollyall as shown in electrical plate No 3 of MES SSR part I and testing on completion includingnecessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed by Engineer in Charge. |
| 180 | M&L for Painting of ceiling fans complete with two coat of white synthetic enamel paintsincluding filling cavities with filliers and marked MES no by black permanent marker complete all as specified and directed by Engineer in Charge. |
| 181 | M&L for Painting of Exhaust fans complete with two coat of white synthetic enamel paintsby spraying including filling cavities with filliers and marked MES no by black permanent marker complete all as specified and directed by Engineer in Charge. |
| 182 | Disconnecting electric and water conection and taking down carefully Energy Meter and deposited to AGE E/M store yard and refixing the energy meter in meter box with Qtr No written on meter by Black permanent marker, complete all as specified and directed by Engineer in Charge. |
| 183 | S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium (extruded section body) and fixed complete all as specified and directed by Engineer in Charge. |
AI Tender Summary
Tender Timeline
Sep 02, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 27, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender