|
| 1 | Demolition of cement concreteunreinforced in ground floors, kota stone, granite flooring, tiles flooring andpavingsnot exceeding15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed. |
| 2 | Demolition of cement concreteunreinforced in ground floors, kota stone, granite flooring, tiles flooring andpavingsnot exceeding15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed. |
| 3 | Demolition ofbrickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed. |
| 4 | M&L brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed. |
| 5 | M&Lwalling of random rubble, un-courses, well bonded bedded & solidly hearted built in cement mortar 1:6, complete all as specified and directed. |
| 6 | All as per item No. 5 above but except stone. |
| 7 | Dismantling oldplain or corrugated rusted steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 8 | S&F 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook boltsand washers in roofs,walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 9 | All as per item No. 8 here-in-above but except sheeting any thickness complete all as specified and directed. |
| 10 | S&F 0.80 mm thick plain, galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275complete all as specified & directed. |
| 11 | Dismantling of wall & ceiling boards (fiber, pulp, insulation etc) or insulation boards /slabs /blanketsany thickness, including cover fillets complete all as specified and directed. |
| 12 | S&F for 4mm thick non-asbestos fibre cement board, ISI marked, fixed to timber frame works as in ceiling, flat or sloppy, as per manufacture\"s instructions, complete all as specified and directed. |
| 13 | M & L second class soft-wood plain fillets square, rectangular or triangular in section, clean sawn area exc. 3 sq.cm but not exc. 6 sq.cm secured with nails or brads complete all as specified & directed. |
| 14 | S&F 4mm thick E-board (Classic) false ceiling of size 610mm x 610mm fixed with GI snap grid frame work of same size as GI tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick GI tee as cross runner and GI angle of size 25x25x1.25mm at the perimeter, including 4mm GI adjustable suspender of required length, inlcuding dismantling of old ceiling, complete all as specified and directed. |
| 15 | S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GInipple for inlet, outlet, washout and overflow etc,including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling of tank complete all as specified and directed. |
| 16 | S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GInipple for inlet, outlet, washout and overflow etc,including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling complete all as specified and directed. |
| 17 | Disconnecting existing tanks of capacity 250/500/1000 ltrssetting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt,etc,from tanks and from moulds of circulating pipe,etc complete all as specified and directed. |
| 18 | S&F in repairs ball brass valves, high pressure,with polythene float and fly nut complete, screwed for 15 mm bore iron pipe or brass ferrule complete all as specified & directed. |
| 19 | S&F in repairs ball brass valves, high pressure,with polythene float and fly nut complete, screwed for 20 mm bore iron pipe or brass ferrule complete all as specified & directed. |
| 20 | S&F in repairs 20mm bore gun-metal, globe or gate valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 21 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed. |
| 22 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50Sqm and not exceeding 4 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed. |
| 23 | Taking down door shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. |
| 24 | S&Fpressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed. |
| 25 | S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer, complete all as specified and directed. |
| 26 | M&L PCC 1:2:4 type B-1 set in CM 1:4 (using 20mm thick crushed stone aggregate) as in copings, bed plates, bed blocks etc for hold fasts including filling of chowkhats etc. complete all as specified and directed. |
| 27 | S&F 35mm thick factory made 2nd class hard wood rail and styleplain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board withcommercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 28 | S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 29 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed. |
| 30 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails.M.S. frame shall be covered with heat molded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed. |
| 31 | S&F 30mm thick flush shutters, covered with decorative face veneer both faces, solid core construction, with block board core, commercial type complete all as specified and directed. |
| 32 | S&F 18/19mm thick prelaminated particle board/MDF board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete as directed. |
| 33 | M&L 6mm thick external teak wood lipping to block board or veneered particle board 18/19mm thick fixed with nails complete as specified and directed by Engineer-in-charge. |
| 34 | S&F in repairs 50 mm long magnetic catchers fixed with brass screws and catch plateson shutterscomplete all as specified and directed. |
| 35 | S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 36 | S&F 75mm size, hasp and staple safety type aluminium anodised with mild steel, hinge pin including bolt to hinge plate and fixed with screws all as directed by Engineer-in-charge. |
| 37 | S&F mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 30mm,complete all as specified and directed. |
| 38 | S&F anodised aluminium frame for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 39 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beadaing for glazing/paneling, C.P brass/stainless steel screws, complete all as specified and directed. |
| 40 | S&F 4mm thick sheet glass, ordinary quality and glazing in aluminium frame in square n exc. 0.5 sq.m in each pane complete all as specified and as directed. |
| 41 | S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 ,complete all as specified. |
| 42 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames,metal frames including punching or drilling out old glazing pins/spring clips , or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 43 | S&F 3mm thick transparent sheet glass, ordinary quality as in glazing n exc. 0.5 sq.m in each pane fixed in wood steel frames with oil putty or wooden beads or self tapping screw complete all as specified and as directed. |
| 44 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixedwith tinned tacks or galvanised wire staples,complete all as specified and directed. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 46 | M&LNon-skid,coloured ceramic tiles 7 to 8mm thick (Square/rectangular)area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed. |
| 47 | M&L light shade, vitrified tiles, 10mmthick(minimum), (square/ rectangular polished, area of each tiles exceeding 0.06 Sqmbut not exc 0.11 Sqm,cut to size as required in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tilesover and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 48 | M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry,pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coatin CM 1:4 to receive tiles,complete all as specified and directed. |
| 49 | M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified. |
| 50 | M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10 mm thickbacking coat in CM 1:4 complete all as specified. |
| 51 | S&F aluminium handles, cast type, anodised of size 150 mm long,complete all as specified and directed. |
| 52 | S&F 200 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 53 | S&F 100 mm sizebutt hinges, medium weight, cold rolled mild steelcomplete all as specified and directed. |
| 54 | S&F 250mm long mild steel sliding door bolts, ordinary type, stove enamelled black, with bright bolt not less than 16mm dia with and including a miminum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 55 | S&F PVC coated mild steel conduit pipe 25mm dia (Drapery rod) including with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod complete all as specified & directed. |
| 56 | Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specifed and directed. |
| 57 | Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from sitecomplete all as specified and directed. |
| 58 | S&F steel water tubing, 15 mm bore, galvanised , \"medium grade\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 59 | S&F steel water tubing, 20 mm bore, galvanised , \"medium grade\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 60 | Fixing only GI steel tubing 15mm bore with all fittings complete all as specified and directed. |
| 61 | Fixing only GI steel tubing 15mm bore with all fittings complete all as specified and directed. |
| 62 | M&L 10 litres capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle andfixing arrangement, 32mm dia PVC flushing pipe and 15mm dia, 600mm long PVC connection with CP brass coupling nuts and PVC washer at both ends (fixed in repair),complete all as specified and directed. |
| 63 | S&F vitreous chinaware squatting pan, \"Orissa pattern\" size 580mm x 440mm, with cast iron \"P\" or \"S\" trap, front or back inlet, integral foot rest with provision of PCC M-15, type B-1 using 20mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe etc and making good to floors to match existing, in repair, complete all as specified and directed. |
| 64 | S&Fin repair vitreous china coloured wash down water closet pan (Padestal Pattern), including connection to flush pipe, \"P\" or \"S\" trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device(excluding flushing cistern and flush pipe) with SWR gully trap, complete all as specified and directed. |
| 65 | S&F CP jet spray (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mm long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 66 | S&F in repairs plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked complete all as specified and directed. |
| 67 | S&F stop valve/angle valve, fancy type, cast copper alloy, chromiun plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed. |
| 68 | S&F brass chromium plated shower rose 125mm size, with or without swivel joints, including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, fixing to steel pipe or unioncomplete all as specified and directed. |
| 69 | S&F in repairs, fancy type, chromium plated, bib tap,cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed. |
| 70 | S&F stainless steel kitchen plate rack of size 600x750x250mm (nearest higher size) hoisted & fixed in position with drills, PVC rawals plugs & chromium plated screws all as per manufacturer\"s instruction complete all as specified and directed. |
| 71 | S&F stainless steel sink with drain board, 1mm thick for kitchen or laboratory with plug, waste pipe washers including contilever cast iron brackets, connecting union, coupling etc overall size 915x460mm with bowl size 410x330x160mm complete all as specified and directed. |
| 72 | S&F in repairs 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 73 | S&F in repairs, fancy type, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" & \"Cold\" with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed. |
| 74 | M&L 15mm thick (average) screed bed/plaster in cement mortar 1:3 in order to maintain proper slope and base over existing roof surface for laying of APP based polymeric membrane, mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.(Note:- WPC and polymeric memebrane shall be measured and paid separately) |
| 75 | S&F High performance two component brushable elastomeric poly urea waterproofing coating cold applied brush applied ultraseal BA or approved equivalent (in sunken portion of WC & floor trap) liquid membrane with white in colour with a elongination of 500% and tensile strength of 5 N/sq mm @ DFT 1mm as per ASTM D 2370.73 % solid content, shore A hardness of min 70. The system include final base preparation, epoxy primer application @200-250 gms/sqmt depending upon the surface porosity and applying home shild ultraseal BA or approved equivalent in two coats at 1.5 kg sqm providing 1.2 mm DFT etc, complete as per manufacture specification. |
| 76 | M&L PCC M-10 nominal mix (using 20mmthick crushed stone aggregate) as in filling under sunken floors complete all as specified and directed. |
| 77 | S&F vitreous China wash basin, white, oval type, size 580 x 450mm including union, brackets and incl waste pipe, chain and plug and porcelain stopper complete all as specified and directed. |
| 78 | S&F in repairsPVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed. |
| 79 | S&F in repair 32mm PVC waste pipe for WHB, sink etc. complete all as specified and directed. |
| 80 | S&F in repairs 600mm x 450mm bevellededge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. |
| 81 | Taking down cement plaster including tiles of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 82 | Rendering 15mm thick plaster on fair faces of brick work/stone masonry, concrete surface in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 83 | Rendering 15mm thick plaster on fair faces of brick work/stone masonry, concrete surface in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 84 | Rendering 5mm thick plaster on fair faces of concrete surfaces as in facia or ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed. |
| 85 | Preparation of newly plastered or unplastered surfaces of wallsand applying two coats of Oil bound distemper, of approved tinted, over 2mm thick wall care putty complete all as specified and directed. |
| 86 | Preparation of old plastered or unplastered surfaces of wallsand applying two coats of Oil bound distemper, of approved tinted, over 2mm thick wall care putty complete all as specified and directed. |
| 87 | M&L exterior painting work till top surface of existing plaster and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall putty with silicon additive and sandaling the surface removal of loose particles and applying one coat of smart care waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coat of 100% acrylic smooth emulsion exterior grrade with silicon antive and anti algal properties ( Apex Ultima Suprema) compelte all as specified anad directed.Note: The above specification for exterior painting is guaranteed for 8 years performance warranty and to be executed only by original equipment manufacturer. |
| 88 | M&L preparation of new plastered ceiling surface and applying three coats of white wash, complete all as specifiedand directed. |
| 89 | Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 90 | Prepartion of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint,complete all as specified and directed. |
| 91 | M&Lpreparing new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 92 | Preparation of old steel surfaces of any description not otherwie described, over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 93 | M&L 1st class softwood small fitting such as bracket of any type, latch and hinge blacks, shaped doors and window stops not exc. 200 cum each complete all as specified and directed. |
| 94 | Taking down eaves gutter and rain water pipes (any size or pattern), PVC/AC pipe including all fittings, heads, shoes, bends swan-necks, etc including cleaning or refixing or removal to store internal dia of pipe 75mm/110mm complete all as specified and directed. |
| 95 | S&F in repairs 110mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints, fixed to walls with stack clamps,complete all as specified and directed. |
| 96 | S&F in repairs 110mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints, as in floor and trenches complete all as specified and directed. |
| 97 | S&F in repairs 75mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints, fixed to walls with stack clamps,complete all as specified and directed. |
| 98 | S&F in repairs 75mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints, as in floor and trenches complete all as specified and directed. |
| 99 | S&F 110mm bore, PVC (SWR) junction,(single T) equal or unequal with access door complete all as specified. |
| 100 | S&F 75mm bore PVC (SWR) junction,(single T) equal or unequal with access door complete all as specified and directed. |
| 101 | M&L 75 mm size PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete including taking down old unserviceable floor trap complete all as specified & directed. |
| 102 | S&F 75mm bore PVC (SWR) bends with access door complete all as specified and directed. |
| 103 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, Dtype 60cm long , fixed to wall with CP brass screw and PVC rawl plugs, complete all as specified and directed. |
| 104 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all asspecified and directed. |
| 105 | S&F in repairs soap dish vitreous china white,approximate size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 106 | S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90gms) complete all as specified and directed. |
| 107 | S&F in repair 32mm waste coupling of PTMT (half or full threaded) minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. |
| 108 | S&F in repair 40mm waste coupling of PTMT (half or full threaded) minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. |
| 109 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed. |
| 110 | M&L 15mm thick (average) screed bed/plaster in cement mortar 1:4 in order to maintain proper slope and base over existing roof surface for laying of APP based polymeric membrane, mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.(Note:- WPC and polymeric memebrane shall be measured and paid separately) |
| 111 | Applying a coat of bitumen primer conforming to IS: 3384-1986 over plastered @ 0.40 litres/Sqm of density 0.87-0.89 kg/litres at 25˚ C and viscosity 70-160CPS (Bitumen primer shall be of same make as of membrane) including preparation of surface complete all as specified and directed. |
| 112 | M&L APP (Atactic Poly-propylene polymer) modified membranes, five layered, 3mm thick weighing not less than 3.6 Kg/Sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all the over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacturer\"s instructions by authorised applicator only after applying evenly a coat of bitumen VG-10 grade @ 1.20 Kg per sqm on the bottom of APP and on top of joints of APP complete all as specified and directed. |
| 113 | Supply only liquid water proofing compound complete all as specified and directed. |
| 114 | M&L plain cement concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed. |
| 115 | S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 Kgf/sq.cm for low level cistern and waste pipe for sink, washbasin complete all as specified and directed. |
| 116 | Dismantlingwrought iron or mild steel work of any description not other wise provided for complete all as specified and directed. |
| 117 | M&L rolled sections (like beams, channels, angles, flats or other type of sections) Fe-410-W (Gde-E-250) quality-B as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed. |
