|
| 1 | Earthwork excavation for foundation in all soils and sub soils in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to full depth as may be directed,except in hard rock,requiring blasting including shoring and shuttering and bailing out of water wherever necessary,refilling the sides of foundation with excavated earth or sand in layer of not more than 15cm thick.well rammed and consolidated and depositing on bank with initial lead and lift of 10m & initial lift of 2m and depositing the surplusr earth within the compound in places shown by the departmental officers with iniital lead and lifts,clearing and levelling the site etc., complete as per SS20B and as directed by departmental Engineers(TNBP No.20B). |
| 2 | Supplying and filling in foudation and basement with Well Gravel in layers of not more than 15cm thick including well rammed watered and consolidatedincluding cost and conveyance of sand to work site from approved sources and including labour charges for all lead, Gravel lift, filling, laying, levelling, watering and compacting including all other incidental charges etc., complete complying with standard specifications(TNBP No.24&25). |
| 3 | PlainCement Concrete 1:4:8 mix (One Part Cement, Four Part Fine Aggregate and Eight Part Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28). |
| 4 | Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30 |
| 5 | For Lintel,Beam&Slab |
| 6 | For Coloumn,Sunshade |
| 7 | Cement concrete 1:1 1/2:3 (One Part cement, one and half Part M-sand and Three Part aggregate) using machine crushed 20mm gauge hard broken stone jelly for all RCC items of work excluding centering strutting, and reinforcement grills placed in position but including mixing concrete, laying and vibrations charges, curing, etc complete and including providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary etc. complete complying with standard specification( TNBP No:30) |
| 8 | Supplying, fabricating and fixing in position ofmild steel Griil Gate and Design Grill,including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials,Conveyence and alllabour charges for fixingin position by dismantling the masonry, concrete etc. and redoing the sameto the original condition duly packed with concrete etc., complete as per standard specifications and as directed by departmental Engineers |
| 9 | Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complyingwith standard specifications and as directed by the deparmental engineers.TNBP No:30 |
| 10 | Brick Work in CM 1:5 (One part of cement & five parts of M- sand) mix usingbest quality sing new best II Class Bricks of size9 ” x 4 3/8 “x 2 3/4 ” including cost and conveyance of materialsto work site and including all labour charges for mixing, laying, curing the concrete etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:31 |
| 11 | b)For Ground Floor |
| 12 | Special Ceiling Plastering with CM 1:3 (One part of cement & three parts of M-sand)mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:30,56&57 |
| 13 | Plastering with CM 1:5(One part of cement & five parts of M-sand) mix for 12mm thick including cost and conveyance of all materialsto work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57 |
| 14 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter |
| 15 | Laying with first quality design ceramic tiles of all colours new ceramic tiles 305 x 305x 6mm tk for flooring and set in Cement Mortar 1:3 (one part of cement & three parts of M-sand)20mm thick and pointed with white cement including adding with suitable colouring pigments of match with the colour of tiles used and curing etc., complete.including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No.special |
| 16 | Daddoing with first quality colour glazed tiles of 300 mm x 200 mm x 6mm size of approved make and quality and colour set in Cement Mortar 1:2 (One part Cement and TwoPart M-Sand) and pointing with white cement neatly including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No.special |
| 17 | Supply and fixing of Indian water closet with new glazed earthern ware Indian water closet of 22” Oriya type of approved quality & approved colour with “P” or “S” trap with sand cushion and forming flooring around the water closet using 40mm size broken brick jelly in cement concrete 1:2:4 of 4” thick and plastering with cement motar 1:3 20mm thick using river sand including fixing the water closet in position and giving necessary connection to CI stacks etc. complete including cost and conveyance of all materials and all labour charges etc.complete complying with standard specification and as directed by the departmental officer etc. complete. TNBP No. 100,102 &103 |
| 18 | Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with \"P\" or \"S\" trap and double flapped seat cover, 10.00 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition. |
| 19 | Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications. |
| 20 | Supplying and fixing in position of Indian make White glazed earthen ware Flat Back Urinal of approved quality including dismantling masonry if necessary and redoing the same to original condition etc., complete as directed by the departmental officers. |
| 21 | Supplying and fixing in position best Bevelled Edge MIRROR of 6mm thick of size 50cm x 40cm fibre glass shelf type with necessary plywood backing and rubber button, chromium plated screws, teakwood plugs, etc., complete complying with standard specification and as directed by the departmental officers. |
| 22 | PlainCement Concrete 1:2:4mix (One part Cement, Two part fine Aggregate and Four part Coarse Aggregate) Using20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specificationsas directed by Engineer incharge. |
| 23 | Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of\"approved quality and colour over a priming coat, including thoroughscraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A |
| 24 | Painting with two coats of Approvedcolour of best quality synthetic enamel paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. (New Iron Surface).TNBP No:66&66-A |
| 25 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light (6 Points Per Coil) (For Rooms like Bath , Toilet,& Pump room etc..)(SD-26) |
| 26 | Supply and fixing of 7/9 Watts LED (Like OSRAM,PHILIPS Etc) Including all charges as Directed by the Departmental Officers Etc,Complete, |
| 27 | Supply and delivery and fixing of 1000 Liter Capacity HDPE Watertankincluding loading,unloading, transportation and labourcharges for fixingcharges etc. |
| 28 | Supplying and fixing in position best quality PVC soil / waste pipes of 110mmdia having 6 kg / sq.cm Etc,Complete as Directed by the Departmental Officers Etc,Complete, |
| 29 | Supplying and fixing in position best quality PVC pipes of 40mmdia having 10 kg / sq.cm. Etc,Complete as Directed by the Departmental Officers Etc,Complete, |
| 30 | Supplying and fixing in position best quality PVC pipes of 20mmdia having 10 kg / sq.cm. Etc,Complete as Directed by the Departmental Officers Etc,Complete, |
| 31 | Supply and delivery of 20 mm Dia PVCheavy type screw down tap Including all charges as Directed by the Departmental Officers Etc,Complete, |
| 32 | Supplying and fixing of 16Amps DP Switch with Metal Galad of 500 V with Fuse and Neutral (Side Handle) on T.W.Box with P.W.D.Earting(SD No.141) |
| 33 | Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains.(SD. 64). |
| 34 | Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 25mm did (B Class) G.I.Pipe suitably bend at both ends with necessary angle iron upright and end support for main.(SD. 69). |
| 35 | Providing Geophysical survey Charges |
| 36 | Drilling of 6”dia vertical bore well in hard rock area using bore well rig including conveyance and erecting of rig and all labour charges etc |
| 37 | Supply and fixing of 160mm dia PVC casing pipe including cost of materials and all labour charges etc., |
| 38 | Supply and deliveryof Submersible pumpset with motor confirm to IS 8034/2002 with isi making as per standard specification for deep borewell or the duty condition of (SINGLE PHASE 30M H x 125lpm) provided the pump set should supplied with the 1m of flat submersible cable the pump set should be delivered at site including packing, transport extra complete. |
| 39 | Supply and delivery of pvc &GI specials including cost for materials and all labour charges forcompleted |
| 40 | 2.5 Sqmm Submersible Cable |
| 41 | 25 mmUPVC Pipe |
| 42 | Bore cover |
| 43 | Bore Clamp |
| 44 | 32mm G.I.Elbow |
| 45 | 32mmG.I.Pipe |
| 46 | 32 mm G.M Non return Valve |
| 47 | 32 mmG.M Gate Valve |
| 48 | 20mm G.I.Coupling |
| 49 | 20mm Waste not Tap |
| 50 | Labour charges for the Erection of submersiblepumpset in borewell/open well including fixing and jointing submesible cable with proper clamps upto the starter to requied depth and also fixing of riser pipes to the requird depth valves erection clamps etc, complete. |
