Tender For Supply Of Equipment., Bhopal-Madhya Pradesh

Tender For Supply Of Equipment. => Limited; 1 Setup should be in combination of below all Anaerobic Baffled Reactor Anaerobic baffled reactor (ABR) should be an improved Septic Tank with a series of baffles Reactors underwhich wastewater is forced to flow under and offer the baffles from the inlet to the outlet to increased contact time with the active biomass(sludge)  Anaero bicbaffled-6 baffle  Material of construction SS304,  No of reactors-5 litres  No of settling tank-1no  Combination of 5 tanks and one Settler tank  Volume of 5 tanks–5 litter each with top cover  Provision for vent in each tank  Volume of setter tank-7 litters with top cover  OEM should be CE certified 1 2 Continuous Stirred Tank Reactor Reactor volume 100 ml working volume capacity Temperature max 200 deg C Pressure max 40 kg One gas inlet one gas release as outlet One sample drain Magnetic stirrer inside and on bottom of the reactor MOC : SS 304 Temperature : Heater -nichrome wires Gauges make WIKA , MOC SS304 Valves SS 304 Temperature controller – Digital and PID control Inlet and outlet connections must be in SS304 OEM should be CE certified 1 3 Upflow Anaerobic Sludge bed Upflow anaerobic sludge bed technology referred as Upflow Anaerobic Sludge bed reactor,is a form of anaerobic digestor that is used in the treatment of dilute waste water streams. Biogas with a high concentration of methane is produced as a by-product, and this may be captured and used as an energy source. Tank capacity:15 litters Working volume:10 Litters 10 litters water inlet design capacity Pump for inlet(influent) pressure with bypass arrangement 1 Filters–2 stage before feed pump 20 Litters plastic tank for feed collection Plastic tank 20 litters capacity Ball valve-4 nos Gas exhaust fan Spurger arrangement for feed inlet MOC : SS 304 unless specified OEM should be CE certified Note : 1. All the three listed equipments (S. No/01,02 & 03) should be compatible to each other. 2. All items should be quoted together. 3. Pre – dispatch inspection may be done at OEM site at the bidders cost. Final installation and demonstration shall be done at MANIT, Bhopal. The bidder has to show all the required parameters.

Refer document

INR 13000.0 /-

INR 6.50 Lakhs /-