|
| 1 | Notes for item No 01 to 13 : (i) Material required for white wash, cement base paint distemper, synthetic enamel paint, external weather proof paint internal emulson paint required as per company specificaton shall be brought in sealed pack/ container and kept in office store and shall be issued to the contractor when required as per consumption.(ii)Paint/White wash shall be carried out only after laying neccessary protection covers/ papers to avoid paint splashes on floors.(iii) Distemper/ emulsion / external emulsion/ synthetic enamel/ primer shall onlyapplied with same brand rollers and tools as approved material make.(iv) Colour of paint may vary from building to building as order by GE without any extra cost to the Govt.(v) Weather proof painting on new surfaces and complete removal surfaces shall be done by authorised applicator and guarantee as per CA shall be obtained from applicator. |
| 2 | M&L for preparation of old plastered surfaces of ceilings and applying one coat white washon ceilings complete all as directed. |
| 3 | M&L for preparation of old plastered surfaces of walls/Ceilingand applying one coat oil bound distempercomplete all as directed. |
| 4 | M&L for complete removal of existing treatment fromsurfaces of walls/ ceiling, washing with water and applying two coats of OBD (tractor emulsion) paint as per manufacturers instructions over a coat ofprimer over one coats of putty 1.5mm thicklayerto level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. |
| 5 | M&L for complete removal of existing treatment fromsurfaces of walls/ ceiling, washing with water and applying two coats of premium emulsionpaint as per manufacturers instructions over a coat of primer over two coats ofputty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. |
| 6 | Taking down cement plaster on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish outside MOD land complete all as specified and directed. |
| 7 | M&L brickwork withfly ash bricksstraight or curved on plan exc 6.00 m mean radius built in cement mortar 1:6 including demolition of existing damaged brick work and removing debris outside MOD land complete all as directed. |
| 8 | M&L for rendering15mm thick on fair faces of brick or concrete surfaces in CM 1:4 finished even & smooth w/o using extra cement complete all as specified and directed. |
| 9 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over 3 mm thickwall care putty (of Birla make) over a coat of alkali resistant primer, complete all as directed by Engineer in charge |
| 10 | M&L for preparation of Newlyplasteredsurfaceand applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. |
| 11 | M&L for complete removal of existing treatment from external surfaces of walls/ ceiling, washing with water and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm each to level the surface and finshied smooth with emeny paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC (DULUX) |
| 12 | M&L for preparation of old painted steel/iron surfaces ofany description, not otherwisedescri-bed, over 10cm width or girthand applying one coat of synthetic enamel paint complete all as directed |
| 13 | M&L for preparation of new steel/iron surfaces ofany description, not otherwisedescri-bed, over 10cm width or girthand applying two coats of synthetic enamel paint complete all as directed |
| 14 | M&L for preparation of old painted wooden surfaces ofany description, not otherwisedescri-bed, over 10cm width or girthand applying one coat of synthetic enamel paint complete all as directed |
| 15 | Taking up or down steel tubing and connections and supply and fixing 15mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed. |
| 16 | Taking up or down steel tubing and connections and supply and fixing 20mm dia GI tubig, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed. |
| 17 | Taking up or down steel tubing and connections and supply and fixing 25mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed. |
| 18 | S&F in repairs 15 mm dia long nose bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed. ISI marked |
| 19 | S&F in repairs 15 mm dia Swag neck piller/wall mounted taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron/CPVC pipe complete all as directed. ISI marked complete all as specified and as directed. |
| 20 | S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed.ISI marked. |
| 21 | S&F in repars angle valve fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified.ISI marked |
| 22 | S&F in repairs 15 mm dia pillar taps, cast copper alloy,with capstan heads,chromium plated,screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed. ISI marked |
| 23 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all asdirected. ISI marked |
| 24 | S&F in repairs 32mm dia PVC flexible waste pipe of length exceeding 60cm but not exceeding 90cm with connector suitable to connect the pipes with waste fitting/ coupling of WHB/ sink/ urinal complete all as specified. |
| 25 | S&Fin repairs vitreous china wash basin, white, flat back, size 550 X 400 mm incl 32 mm dia CP Brass waste couplingincl brackets complete all as specified. |
| 26 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as specified. |
| 27 | S&F in repairs vitreous china squatting pan \"orissa\" pattern of size 580x440mm white with integral foot rest including provision of P or S trap including connection to flushing pipe andmaking good to floor complete all as specified.Note:- Demolition of tiles/concrete and pad concreting required for setting trap and making good to floor shall be deemed to included in the quoted rate. |
| 28 | S&F in repairs 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as directed. ISI marked |
| 29 | S&F in repairs brass chromium platedtubulartowel rail 20mm dia, D type, 600 mm long between flanges complete all as directed. ISI marked |
| 30 | S&F in repairs plastic water closet seat, white/colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging divice complete all as directed. ISI marked. |
| 31 | S&F in repairs 600 x 800mm bevelled edge Mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as directed. |
| 32 | Supply and fix in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed |
| 33 | S&F in repair electronic urinal of size 425x 410 x 645mm neutral integrated AC/DC with power source complete all as directed |
| 34 | S&F in repairs Urinal sensor, solonet Valve, Battery box along with batteries complete all as directed. |
| 35 | S&F in repairs WHB sensor, solonet Valve, Battery box along with batteries complete all as directed. |
| 36 | S&F in repairs brass chromium plated health faucet with 1.2m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe complete all as specified. |
| 37 | S&F in repairs brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directed.ISI marked |
| 38 | S&F in repairs brass chromium plated shower rosewith swivel joints 125mm dia incl stainless steel arm, ISI marked incl fixing to steel pipe or union.ISI marked |
| 39 | S&F in repairs stainless steel grating of 100 mm dia CP grating for nahani traps with or without hole for waste pipe complete all as directed |
| 40 | S&F in repairs 18/19 mm thickprelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup board shutter, shelves and similar items fixed to timber frame work complete all as specified and directed. |
| 41 | S&F in repairs chromium plated brass soap dish (Double Sope type) with screws complete.ISI marked |
| 42 | S&F in repairs 40mm dia brass polished cup board knobs fixed with nuts and screws all as directed. ISI marked |
| 43 | S&F in repair PVC bathroom cabinet with looking mirror of size 500 mm x 400 mm x 140 mm complete all as directed. Make : Commander/ Prayag |
| 44 | S&Fin repair CP brass 3 in 1 wall mounted mixture with telephone hand shower complete all as directed.Make: Jaquar/Hindware/Parryware |
| 45 | S&F in repair telephone hand shower complete all as directed.Make: Jaquar/Hindware/Parryware |
| 46 | S&F in repairsfloor door stopper of S/S body with double legs and 150 mm long fixed with screws to shutters complete all as specified and directed. ISI marked |
| 47 | S&F in repairsfloor door stopper of S/S body with double legs and 100 mm long fixed with screws to shutters complete all as specified and directed. ISI marked |
| 48 | S&F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as directed. |
| 49 | S&F in repairs Brass cupboard locks heavy duty of size 75mm and 4 levers with duplicate keys complete all as directed.Make: Godrej/Link/Sheel |
| 50 | S&F in repairs stainless steel peg set of 06 hooks complete all as directed ISI marked |
| 51 | M&L vitrified tiles of any shade 10mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer in CM 1:6 incl dismantling of old floor tiling and removing rubbish off the premises all as specified and directed. |
| 52 | All as per item No. 50 above but as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layer in CM 1:4 incl dismantling of old skirting tiling and removing rubbish off the premises all as specified and directed. |
| 53 | S&F in repair sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 54 | S&F in repair sink made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 55 | S&F in repairs stain less steel plate rack made of stainless steel 1mm thick size 900mmx 600mm x150 mm fixed in position complete all as specified. |
| 56 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over a screed bed 20 mm thick in CM 1:6 incl dismantling of old floor tiling and removing rubbish off the premises all as specified and directed. |
| 57 | M&L Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed bed or bedding layer in CM 1:4 incl dismantling of old dado/skirting tiling and removing rubbish off the premises all as specified and directed. |
| 58 | M&L 18 mm thick granitework (table rubbedand polished) in steps, jambs, pillars, window cills, cooking platforms, landings and like incl 10 mm thick screed bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitestone including grinding and polishing and rounding of edges,including demolition of old granite of any thickness complete, all as specified and directed. |
| 59 | Taking down chowkats orframe with shutters (without taking off shutters from frame) buteach not exceeding 1.50 Sqm complete all as specified and as directed. |
| 60 | Taking down shutters of any description exc 1 sqm and nexc 2 sqm each and removing away from site complete all as specified and directed. |
| 61 | S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing. |
| 62 | S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with2,4 or 6 raised panel design with 2mm thick mouded PVC sheet on front face & 2mm plain colour PVC sheet on back face with particle board core all as per specification and directed. |
| 63 | S&F 35 mm thick Factory made pressed moulded panelled door shutter of single or multi panel textured masonite moulded door fabricated using well seasoned and chemically treated solid second class hard wood styles, rails and panels made out of tubular core bonded with PF synthetic resin conforming to BWP grade IS: 848.Both faces shall be covered by hot pressing with high density fibre (HDF) of 2.8 to 3 mm thick imported masonite skin.The door\"s color, texture design as approved by GE all as specified and as directed. |
| 64 | S&F35 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed. |
| 65 | S&F mild steel butt hinges, medium weight cold rolled 100 mm size complete all as specified. |
| 66 | S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 67 | S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 68 | S&F 200 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 69 | S&F in repairs stainless steel wire cloth 304 grade stainlesssteel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixedwith tinned tacks or galvanised wire staples etc as in panels ofwire gauzed shutter complete all as specified and directed. |
| 70 | S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed |
| 71 | S&Fstainless steel wire cloth 304 grade stainlesssteel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixedwith tinned tacks or galvanised wire staples etc as in panels ofwire gauzed shutter complete all as specified and directed. |
| 72 | M&L running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded n.exc 6 mm) complete all as directed. |
| 73 | S&F 3 mm thick figured glass, pin headed type and glazing with oil putty and glazing clip in metal frame or second class hard wood beading in suitable size for wooden frames on squares not exceeding 0.5 Sqm in each pane including hacking out existing damaged glass work complete all as directed. |
| 74 | S& F of UPVC windowa/Ventilator with top hung shutters made out of profile width of frame 40 mm to 45 mm limit thermal conductivity to 1.3 kcal/sqm/hr centigrade sound insulationup to 4-0 bds density 1.46 gm/ml tenstile stremght 43.9 N/sqm, % Elongation at break - 215 tenstile mqduls-2840N/sqmm, Fluxural strenght-51N/sqmm heat angimg at 150 2200n / sqmm double baskets & wool pile on window multi point gear locking at different sides of frame with peg stay of sutable size to keep hung shutter in open position with temper proof screws with and incuding glazed shutters fixed with 3mm thick frosted sheet glass complete all as directed.incl taking down existing ventilators/windows and make good distruped area. |
| 75 | M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; handrails; railings; framework of valley gutters and similar work con- forming to Fe.290.Gde-E-165de E-165 and including Dismantling existing iron frame work any discription. |
| 76 | S&F in repairs glass shelf of size 400x200 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated 150mm lenght brackets on both sides fixed in position complete all as specified and directed. Make- Hi life |
| 77 | S&F in repairs carner glass shelf of size 400x200 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated knobson both sides fixed in position complete all as specified and directed. Make- Hi life |
| 78 | M&L for providing chequered cement concrete rubber moulded coloured tiles glossy factory made of hydraulic pressed finish of 25 mm thick and size not less than 300x300mm thick set and jointed in neat cement slurry in floors with grey cement and pigments and with 15mm thick screed bed or bedding layer in CM 1:6 including dismantling of old tiles and screed bed complete all as directed |
| 79 | M&L 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawn, drvie ways or light traffic parking etc of required strength, thickness & size / shape , made by table vibratory method using PU mould , laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern finishing sweeping extra sand complete incluidng dismantling old paver blocksall as specified |
| 80 | M&L renewing cement concrete chequered tiles / inter locking tiles ISI Mark in patch, area n. exc 5 Sqm including removing and cleaning old tiles, preparing bed and laying or setting, jointing and pointing new or old tiles, including replaced damage tiles & providing PCC(1:4:8) 75mm thick sub base and 20mm thick CM 1:6 bedding layer complete all as specified and directed. |
| 81 | Demolition ofcement concrete (unreinforced ) in ground floors and pavings n. exc15 cm thickness ( below or above ground level) |
| 82 | M&L 75mm thick cement concrete type B-2, 1:2:4 ( 40mm graded stone aggregate as in paths parking etc finished even and smooth without using extra cement complete |
| 83 | M&L PCC 1:5:10 type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete in sunken floor all as sspecified |
| 84 | M&L preparation of new wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying pink primer and one coat of synthetic enamel paint. |
| 85 | NOTE FOR CONTRACTOR APPLICABLE TO ALL SCHEDULED ITEMSNO 01 TO ITEM NO 75 :- (a)Contractor\"s supervisor will collect Bldg No from AGE B/R II for daily bases at 9.00 AM and feedback should be provide same working day at 05.00 PM. After complition of work User/Occupant signature should done without fail. (b) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor. |
