Repair And Polishing Of Wooden Furniture (Fd/Map) Of Omqs/Smqs/Single Accn At 7 Afh Kanpur Cantt- 1 Chair writing (FD 280,FD 202,FD 261, FD 148) :- Replacement of the following old damaged/ decayed parts of chair writing with new parts made of Ist class new teak seasoned wood complet all as specified and shown on drg. 2 Front leg to Chair 3 Rear legs 4 Right or front or rear or Left rails of Seats with canning holes 5 Stiffener 6 Top Rails 7 Arms to Chair 8 Chair dinning ( FD 279 , FD 270, FD 262 ) :-Replacement of the following old damaged/ decayed parts of chair dinning with new parts made of Ist class new (teak )seasoned wood complete all as specified and shown on drg. 9 Front leg to Chair 10 Ready made rear leg to Chair 11 S&F right or front or rear or Left rails of Seats with canning holes 12 Stiffener 13 Back Rest stiffener 14 Chair Easy ( FD 229 ) :- Replacement of the following old damaged/ decayed parts of chair Easy with new parts made of Ist class new teak seasoned woodcomplete all as specified and shown on drg. 15 Front leg 16 Rear leg 17 Arms 18 Front, Rear, Side rails of seat with canning Holes 19 BED PLY WOOD TOP( FD 246) ;-Dismantling of old U/S Existing ply wood top from Bed Ply Wood Top and S & F of new top 12 mm thick ply wood commercial face BWR Grade of same shape and size rest all as per Drg and as Directed by Engr-in-Charge 20 Dismantling of old U/S teak face ply wood 4 mm thick from Head Board and S & F new4 mm thick one side teak face on both side of Head Board with 4 mm thick teak wood beading around the head board after repairing the complete head board. Rest all as per drg and as directed by Engr-in-Charge. 21 All as per item No.4.02 above But Foot board. 22 Removing of old U/S Leg of Bed Ply Wood top and S & F of new Leg made of seasoned sheesham wood to the same shape and size and as specified in drg andas directed by Engr-in-Charge. 23 Removing of old U/S long Rail of Bed Ply Wood top and S & F of new long rail made of well seasoned sheesham wood of samesize and shapeas per drg and asdirected by Engr-in-Charge. 24 TABLE BED SIDE ( FD 276) :- Taking out old unseviceable components of table bed side as and where required from table bed side and S&F new components of existing shape and size all as specified on drawing and directed with following components. 25 Sides made of 18mm thick veneered teak face particle board exterior grade 26 Top made out of 18mm thick veeneared teak face particle board exterior grade with 1.5mm thick plastic laminated sheet on top 27 Bottom made out of 18mm thick veneered teak wood particle board, exterior grade 28 Shelves made out of 12mm thick veneered teak face particle board, exterior grade 29 Back ply 6mm thick plywood, BWR grade, commercial type 30 Table dressing ladies with Mirror (FD 251)& Table dressing ladies w/m & stool (D/E6/MAP-II/07) :-Taking out old U/S component of table dressing ladies as and where required and S&F of new components of existing shape and size as specified on drawing and directed with following components:- 31 Top made of 18mm thick prelaminated Particle board exterior grade, one side decorative with 3mm thick teak wood beading all around. 32 4mm thick mirror & 6mm thick plywood commercial type at back 33 4mm thick mirror & 6mm thick plywood commercial type at back 34 Brass knob best quality as per drg and directed by Engr-in-charge . 35 Removing of U/S cushion for stool table dressing ladiesS&F newcushion of size 315 x 365mm and 40 density covered with leatherite as specified. 36 Removing of U/S ply openable shutter for stool table dressing ladies S&F new ply of size 315x365mmx12mm thick ply openable shutter as specified. 37 TABLE DRESSING GENTS (FD 230 );-Taking out old U/S component of table dressing gentsas and where required and S&F of new components of existing shape and size all as specified on drawing and directed with following components:- 38 5.5 mm thick mirror & 6mm thick plywood commercial type at back 39 Drawer with front of 18mm thick prelaminated Particle board, exterior grade, one side decorative other sides of 12mm thick teak wood planks and bottom with 6mm thick plywood commercial grade 40 Top made of 18mm thick prelaminated particle Particle exterior grade, one side decorative with 3mm thick teak wood beading all around. 41 Brass knob best quality as per drg and directed by Engr-in-charge . 42 TABLE CENTRE ( FD 274) :- (a) Taking out old U/S top of table centre and S&F new top of 18mm thick prelaminated Particle board exterior grade and providing with 4 mm thick teak wood beadingall round the top complete all as shown in drg and directed by Engr-in-Charge 43 Taking out old U/S legsof table centre and S&F new legs of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge. 44 All as per item No 8 .02 here in before but short rail. 45 All as per item No 8.02 here in before but long rail. 46 All as per item No 8.02 here in before but stiffener. 47 Table 3x2with and w/o drawer ( FD 224 , FD 231, FD 283 , FD 284 ) Taking out old U/S top of table 3x2 and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beadingall round the top complete all as shown in drg and directed by Engr-in-Charge . 48 Taking out old U/S legsof table 3x2 and S&F new legs of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge. 49 All as per item No 9 .02 here in before but short rail. 50 All as per item No 9.02 here in before but long rail. 51 Taking out old damaged/decayed drawerfrom its position and S & F new drawer as per existing shape & sizemade out of well seasoned teak wood and 6mm thick plywood consisting 3 Nos of ply on the bottom of the drawercomplete all as specified & shown on drgs. 52 All as per item No 9.02 here in before but stiffener. 53 Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge . 54 Table peg( FD 277 ) :- Taking out old U/S top of table peg and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beadingall round the top complete all as shown in drg and directed by Engr-in-Charge . 55 Taking out old U/S legsof table peg and S&F new legs of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge. 56 All as per item No 10 .02 here in before but side rail. 57 All as per item No 10 .02 here in before but stiffener. 58 Table Writing (FD 249 ) :-Taking out old U/S top of table writing and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beadingall round the top complete all as shown in drg and directed by Engr-in-Charge. 59 Taking out old U/S Stiffener of table Writing and S & F NEW Stiffener made of seasoned sheesham wood as per drawing and directed by Engr-in-charge 60 Taking out old U/S drawer and S&F new drawer of 18mm thick prelaminated particle board exterior grade one side decorative and bottom with 6mm thick plywood commercial grade complete all as shown in drg and directed by Engr-in-Charge. 61 Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge . 62 Teapoy (FD 284 ) :- Taking out old U/S top of teapoy and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beadingall round the top complete all as shown in drg and directed by Engr-in-Charge 63 Taking out old U/S leg of teapoy and S&F new leg to be made of seasoned sheesham wood same shape & size and directed by Engr-in-Charge 64 All as per item No. 12.02 here in before but side rail 65 All as per item No.12.02here in before but stiffener 66 Table Dining 6 Pers/8 Pers ( FD 378) :-Taking out old U/S top of table dining 6 pers/8 pers and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beadingall round the top complete all as shown in drg and directed by Engr-in-Charge 67 Taking out old U/S legsof table dining 6 pers/8 pers and S&F new legs of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge. 68 All as per item No. 13.02 but new short rail. 69 All as per item No.13.02 but new long rail. 70 Side board( FD 26,FD 241,FD 371):-Taking out old U/S front single door of side board and S&F new door made of 18mm thick prelaminated Particle board, exterior gade, one side teak face and white laminated on other side and providing 4mm thick teak wood beading all-round the top all as specified on drawing and directed. 71 Taking out old U/S side of side board and S&F new side made of 18mm thick prelaminated Particle board, exterior grade, one side teak face and white laminated on other side complete all as specified on drawing and directed 72 Taking out old U/S back portion plywood of side board and S&F of new plywood 6mm thick, BWR grade, commercial all as specified on drawing and directed 73 Taking out old U/S top board of side board and S&F new top board made of 18mm thick prelaminated Particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing and directed. 74 Taking out old U/S bottom portion board of side board and S&F of new bottom board made of 18mm thick, prelaminated prarticle board, extrerior garde both face white laminated complete all as specified on drawing and directed . 75 Taking out old U/S drawer of side board and S&F of new drawer to be made of 12mm thick, well seasoned sheesham wood planks and 6mm thick commercial ply at bottom of drawers complete all as specified on drawing and directed. 76 Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .. 77 Book case (FD 234) :-Taking out old U/S front single door of book case and S&F new door made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing and directed. 78 Taking out old U/S side of book case and S&F new side made of 18mm thick prelaminated Particle board, exterior grade, one side teak face and white laminated on other side complete all as specified on drawing and directed 79 Taking out old U/S back portion plywood of book case and S&F of new plywood 6mm thick, BWR grade, commercial all as specified on drawing and directed 80 Taking out old U/S top board of book case and S&F new top board made of 18mm thick prelaminated Particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing and directed. 81 Taking out old U/S bottom portion board of book case and S&F of new bottom board made of 18mm thick, prelaminated Particle board, extrerior garde both face white laminated complete all as specified on drawing and directed 82 Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge. 83 Sofa set 5 seated/sofaset 4 seated (a) Taking out old U/s Broken front leg from Sofa set 5 Seated and S & F New leg to be made of seasoned sheesham wood same shape and size as specified and directed by Engr –in-Charge 84 All as per Item No. 16.01 abovebut rear leg 85 All as per Item No. 16.01 abovebut Arms 86 All as per Item No. 16.01 above but Batten 87 Replacing of existing old cushion foam size 22”x21”x4” from seat and back of Sofa set and supply and fixing of new cushion foam 22”x21”x4” (U Foam) 32 density& covered with cloth tapestry as per sample Kept in Furniture Yardapproved by GE (Cost of tapestry cloth not less than Rs 240/- per meters) all as specified and directed by Engr-in-Charge. 88 Chair all type- Recanning of chairs CBA/CBB wooden and chair bin soiled linen, chair Easy, Chair dining, Chair writing etc with 2mm wide new plastic cane and 0.4mm thick cream/white half round seat and back and border to be covered with 3 to 4 mm wide ½ round cane complete all as specified and shown in drawing. 89 Almirah Large/Med with shelves wooden ( DB 3941 & 3942):- Removing old u/s Shelves of almirah large/Medwooden and S&F new shelvesmade out of teak wood all as perdrawing and directed by GE/Engr - in - charge 90 Removing old u/s top of almirah large/med wooden and S&F new top made out of new teak wood all as per drawing and directed by GE/Engr-in -charge 91 Removing oldu/s base complete with legs frame and S&F new base complete with legs all as per drawing and directed by GE/Engr-in -charge 92 M&L for preparation of Almirah Large/Med with shelves wooden old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs andas directed:-
