Tender For Urgent Restoration Of Different Flood Damaged Mi Schemes During The Disaster 2024 25 Sh Desiltation Restoration Of Electrical Equipments And Other Allied Works Of Different Li Schemes Within Kakraban Block Area Gr Ii
Tender Value
8.81 Lakhs
Estimated cost
Bid Submission
12 Sep 2024
0 days left
EMD
17623
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kakraban → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Urgent Restoration Of Different Flood Damaged Mi Schemes During The Disaster 2024 25 Sh Desiltation Restoration Of Electrical Equipments And Other Allied Works Of Different Li Schemes Within Kakraban Block Area Gr Ii
BOQ
| Sl. No. | Item Description |
| 1 | Desilting of earth, silt, garbage, slush and other solid deposits etc. from the existing canal mannually to bring it to the required section for smooth flow in the canal including disposal of excavated material outside of the canal with a lead of 50 m. and all lifts including execution of work in or under water, liquid mud and under foul conditions including the cost of taking care of canal section. Dewatering of stagnent or flowing or seepage water/sludge/liquid marsy entering into the canal from any sources as required for satisfactory execution of work including taking out the excavated material outside the canal as per directions of Engineer-in-charge. Disposal of excavated materials, such as earth, silt, garbage, slush and other solid deposits etc. to be deposited & properly levelled over the canal embankment. |
| 2 | Dismantling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineer-in-Charge. |
| 3 | Supply & fitting fixing ball bearing of approved quality for pump required during overhauling.a) 6305 Ball bearing (TATA/SKF) |
| 4 | b) 6306 Ball bearing (TATA/SKF) |
| 5 | c) 6308 Ball bearing (TATA/SKF) |
| 6 | Providing & fitting fixing Shaft sleeve bush of approved quality.i) Cast iron (CI) |
| 7 | Providing & fitting fixing Shaft sleeve nut of approved quality.i) Cast iron (CI) |
| 8 | Dismantling of motor for varnishing, heating etc. complete in/c reinstallation and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge. |
| 9 | Providing & fitting fixing PVC suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality.a) 150 mm dia |
| 10 | Providing & fitting fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality.a) 150 mm dia |
| 11 | Providing & fitting fixing C.I foot valve of heavy duty at site of work of approved quality.a) 150 mm dia |
| 12 | Providing & fitting fixing C.I foot valve spare parts of 125/150 mm dia at site of work of approved quality.C.I foot valve weight |
| 13 | C.I foot valve ring |
| 14 | C.I foot valve net |
| 15 | Labour charge for reinstallation of all electrical equipments(dismentalled serviceable materials, if any additional/ replacement of electrical eqiupments required will be paid separtely) on the pannel board including trial run for 10 hrs in two spell complete as per direction of the Engineer-in Charge. |
| 16 | Supplying and fitting fixing of selector switch on the panel board of approved quality. |
| 17 | Providing and fitting fixing of Full way valve (brass) 40 mm dia. of approved quality. |
| 18 | Providing and fitting fixing 40 mm dia following GI fittings of approved quality as per direction of the Engineer-in-Charge. a) Union joint |
| 19 | b) Elbow |
| 20 | c) Bend |
| 21 | d) Tee |
| 22 | e) Socket |
| 23 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality.a) 150 mm dia |
| 24 | b) 125 mm dia |
| 25 | Providing & fitting fixing of full threaded nut and bolt of approved quality as per direction of the Engineer-in-Charge. |
| 26 | Repairing of OSCO starter including supplying & fixing of necessary spare parts as per direction of Engg.- In - Charge.i) Stand finger |
| 27 | ii) Gola finger |
| 28 | CT Coil |
| 29 | Magnet Coil |
| 30 | Supplying & filling of Transformer Oil in the oil tank of manually operated oil immerged starter of approved quality. |
| 31 | Supplying & fitting fixing manually operated oil immerged starter of approved quality.a) 30 HP Osco/ BCH make |
| 32 | Providing & fixing 200 Amps busbar of size 600X 450X100 mm with 4 nos. copper strip of size 450X40X4 mm of approved quality. |
| 33 | Supplying & fitting fixing kit cut for main & sub-main swich (male & female) as per direction of the Engineer in Charge.a) 63 Amps |
| 34 | b) 200 Amps |
| 35 | Providing & fitting fixing Steel sheet enclosed switch Fuse unit (Suitable for DIN fuse) triple pole with Neutral Link (TPN), 415/500 Volt, complete as per direction of Engineer-in-Charge.a) Current Range 200 Amps |
| 36 | b) Current Range 63 Amps |
| 37 | Supplying and fitting fixing AC Voltmeter (Moving Iron) on the panel board of approved quality.SMI-144, Range 0-400 to 0-500 |
| 38 | Supplying and fitting fixing AC Ammeter (Moving Iron) on the panel board of approved quality. SMI-144, Range 0-10A |
| 39 | Supplying & fitting fixing of PVC insulated Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality. A) 7/16 Copper wire |
AI Tender Summary
Tender Timeline
Aug 31, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 12, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender