Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #45000163

Tender For Various Size And Type Of Pipe Line Leakage Repairing Under Jen Section Sadri

Issued by Government Departments · falna, Rajasthan
Tender Value
6.75 Lakhs
Estimated cost
Bid Submission
20 Sep 2024
0 days left
EMD
13500
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
falna → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Various Size And Type Of Pipe Line Leakage Repairing Under Jen Section Sadri

BOQ

Name of Work :- Various Size & Type of Pipe Line Leakage Repairing Under JEN Section Sadri(Rates are as per BSR Approved O&M BSR 2020 Jodhpur)
Sl. No. Item Description
1Repairing of leakage in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE pipe lineup to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including taking out the burst pipe from trench, dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material, tightening of CID Joints to make repair leak proof and then refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. for entire job contractor will use his own T&P & labour and will arrange transportation of material required from Jen store. (Required material such as pipe piece, CID Joints shall be provided by Department free of cost) In all type Soil AC/PVC/HDPE pipe 50/63/75mm
280/90mm
3100/110mm
4125/140mm
5150/160/180mm
6200/225mm
7250/280mm
8300/315mm
9Add on above item no. 1.1.1 for C.C. Road. Pit in CC Road shall be cut in optimum size through CC cutter Machine only. 50/63/75mm
1080/90mm
11100/110mm
12125/140mm
13150/160/180mm
14200/225mm
15250/280mm
16300/315mm
17Minor repair of leakages such as lead caulking, plugging, clamping and ring fixing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site to make repair leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as lead wool, white hump, plugs, clamps etc. shall be provided by Department free of cost) In all type Soil 50/63/75mm
1880/90mm
19100/110mm
20125/140mm
21150/160/180mm
22200/225mm
23250/280mm
24300/315mm
25Add on above item no. 1.3.1 for C.C. Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only. 50/63/75mm
2680/90mm
27100/110mm
28125/140mm
29150/160/180mm
30200/225mm
31250/280mm
32300/315mm
33Replacement of CI/ DI Double flange sluice valves,non return valves,butter fly valves etc. in existing Distribution/Rising Main/Transmission Main pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including providing and fixing MS Nut and Bolt and rubber gasket, dewatering and providing adequate safety arrangement at site andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as Valve, Tail piece, CID Joints etc. shall be provided by Department free of cost) In all type Soil80 mm
34100 mm
35125 mm
36150 mm
37200 mm
38250 mm
39Add on above item no. 1.4.1 for CC Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only. 80 mm
40100 mm
41125 mm
42150 mm
43200 mm
44Removal of Choking from pipe line, including tree roots, malba, sand and otherby manually or other means, cleaning of line and testing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/uPVC pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost)as per satisfaction of EIC. Rates for per pit. In all type Soil63/75mm
4580/90mm
46100/110mm
47125/140mm
48150/160/180mm
49200/225 mm
50Add on above item no. 1.5.1 for CC Road. Pit in CC Road shall be cut in optimum size through CC cutter Machine only.63/75 mm
5180/90mm
52100/110mm
53125/140mm
54150/160/180mm
55200/225 mm
56Disconnection of water connection from existing pipe line in all type of soils up to 1.5 mtr depth by digging out suitable size of pit at site of work, with cutting of service line and refixing of clamp revolving it 180 degreethen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour.
57Add on above item no. 1.7 for CC Road. Pit in CC Road shall be cut in optimum size through CC cutter Machine only.
58Work of Inter Connection in AC/PVC/HDPE pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site, cutting of existing pipeline, jointing of Tee (complete) and other specials to make inter connection repair leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. for entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. (Material such as Tee/ Tee Clamp/rubber sheet/ CID joints required for inter connection shall be provided by the department free of cost). In all type Soil80 mm to 110 mm
59125 mm to 165 mm
60200 mm to 300 mm
61Add on above item no. 1.9.1 for CC Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only. 80 mm to 110 mm
62125 mm to 165 mm

AI Tender Summary

OUR REF NO 45000163
AUTHORITY Government Departments
TENDER VALUE 6.75 Lakhs
LAST DATE 20-09-2024
Authority
Authority Name Public Health Engineering Department
Work Description Various Size And Type Of Pipe Line Leakage Repairing Under Jen Section Sadri
Basic Detail
Tender No NIT No 74/2024-25
Bidding Type Tender
Location
City falna
State Rajasthan
Key Dates
Publish Date 30 Aug 2024
Submission Date 20 Sep 2024
Open Date 20 Sep 2024
Finance
Tender Value 6.75 Lakhs
Tender Fee 1000
EMD 13500
Exemption Available
Document List
8717ae4b-d287-469d-b38e-38101ce63b33.html
BOQ_748056.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 30, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 20, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 20, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

8717ae4b-d287-469d-b38e-38101ce63b33.html

xls

BOQ_748056.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders