Tender For Providing And Fixing Porta Cabin Class Room And Hall At Backside Ajk-Mcrc, Jamia Millia Islamia
Tender Value
56.66 Lakhs
Estimated cost
Bid Submission
07 Sep 2024
0 days left
EMD
1.13 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing And Fixing Porta Cabin Class Room And Hall At Backside Ajk-Mcrc, Jamia Millia Islamia
BOQ
| Sl. No. | Item Description |
| 1 | P/F PORTA CABIN CLASS ROOM AND HALL AT BACKSIDE AJK MCRC JMI |
| 2 | SUPPLY AND INSTALLATION OF 80 MM THICKPUF PANEL FOR WALL, SANDWICHED BETWEEN 0.5 MM THICK PPGI SHEET WITH LIGHT RIBBING, DENSITY: 40+/-2 KG/M3 |
| 3 | SUPPLY AND INSTALLATION OF 50/80 MM THICK PUF PANEL FOR ROOFING HAVING TOP SIDE HI-RIB PROFILED 0.5 MM THICK PPGI SHEET AND BOTTOM SIDE0.5 MM THICK PPGI SHEET WITH LIGHT RIBBING,DENSITY: 40+/-2 KG/M3 |
| 4 | SUPPLY AND INSTALLATION OF BOTTOM CHANNELANDFLASHING MADE OUT OF 0.5 MM THICK PPGI SHEET |
| 5 | SUPPLY AND INSTALLATION OF RAIN WATER GUTTER MADE OUT OF 0.5 MM THICK PPGI SHEET |
| 6 | SUPPLY AND INSTALLATION OF SIMPLE SINGLE LEAF PUF DOOR (SIZE : 3 FT * 7 FT) WITH REQUIRED FITTINGS (HINGES,\"D\" HANDLES AND TOWER BOLT) |
| 7 | SUPPLY AND INSTALLATION OF SIMPLE SINGLE LEAFTOILET DOOR (SIZE : 2.5 FT * 7 FT) WITH REQUIRED FITTINGS |
| 8 | SUPPLY AND INSTALLATION OF TWO TRACK AL-GLASS SLIDING WINDOWS WITH GI GRILL ( SIZE: 4 FT * 4 FT) |
| 9 | DESIGN, FABRICATION, SUPPLY AND ERECTIONOF MSSTRUCTURE |
| 10 | C/o Toilet at Backside MCRC |
| 11 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, by mechinical / manual means ramming of bottoms, for all depth, including getting out the excavated soil, and then returning thesoilasrequired,inlayersnotexceeding 20cmindepth,including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:_All kinds of soil_Pipes, cables etc, not exceeding 80 mm dia. |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 14 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :_W.C. pan with ISI marked white solid plastic seat and lid |
| 15 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :_One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 16 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:_White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 17 | 32 mm dia |
| 18 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 19 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 20 | Providing and fixing soil, waste and vent pipes :_100 mm dia_Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 |
| 21 | 75 mm diameter :_Centrifugally cast (spun) iron socketed pipeas per IS: 3989 |
| 22 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : |
| 23 | 75 mm dia pipe |
| 24 | 100 mm dia pipe |
| 25 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete._100 mm dia |
| 26 | Sand cast iron S&S as per IS - 3989 |
| 27 | 75 mm dia_Sand cast iron S&S as per IS- 3989 |
| 28 | Providing and fixing plain bend of required degree._100 mm diaSand cast iron S&S as per IS : 3989 |
| 29 | Providing and fixing trap of self cleansing design with screwed downor hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :_100 mm inlet and 100 mm outlet_Sand cast iron S&S as per IS: 3989 |
| 30 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour._600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 32 | 15 mm nominal dia Pipes |
| 33 | 20 mm nominal dia Pipes |
| 34 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work_32 mm dia nominal bore |
| 35 | Making connection of G.I. distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete:_25 to 40 mm nominal bore |
| 36 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 37 | 25 mm nominal bore |
| 38 | 32 mm nominal bore. |
| 39 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :_20 mm nominal bore |
| 40 | Providing and fixing uplasticised PVC connection pipe with brass unions_30 cm length_15 mm nominal bore |
| 41 | Providing and filling sand of grading zone V or coarser grade, all round the G.I. pipes in external work_32 mm diameter pipe |
| 42 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 43 | 20 mm nominal bore |
| 44 | 25 mm nominal bore |
| 45 | 32 mm nominal bore |
| 46 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 47 | 15 mm nominal bore |
| 48 | 20 mm nominal bore |
| 49 | 25 mm nominal bore |
| 50 | 32 mm nominal bore |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 52 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 53 | 15 mm nominal bore, 122mm long, weighing not less than 99 gms |
| 54 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
| 55 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete_150 mm diameter |
| 56 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design_150 mm diameter S.W. pipe |
| 57 | Providing andfixingsquare-mouthS.W.gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover withframe of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:_100x100 mm size P type_With commonburntclay F.P.S.(nonmodular) bricks of class designation 7.5 |
| 58 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement:3coarsesand)finishedwithfloating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 59 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
| 60 | With common burntclay F.P.S. (non modular)bricks of Class designation 7.5 |
| 61 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :_For pipes 100 to 250 mm diameter |
| 62 | Add for revised GST @18% in place of 12% ie 6.33% |
| 63 | Civil workfor porta cabin class rooms back side AJKMCRC JMI |
| 64 | Earthworkinexcavationbymechanicalmeans(Hydraulicexcavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge._All kinds of soil |
| 65 | Fillingavailableexcavatedearth (excludingrock)intrenches,plinth.sidesof foundationsetc.inlayersnotexceeding 20cmindepth,consolidatingeach deposited layer by ramming and watering, lead up to 50 m and for all lift |
| 66 | Providingandlayinginpositioncementconcreteof specified grade excluding the cost of centering and shuttering - All work up to plinth level :_1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 67 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 68 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:_Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 69 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level._Cement mortar 1:3 (1 cement :3 coarse sand) |
| 70 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner withsuitably spacedjoints to get requiredlengthandof size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for serviceslike diffusers, grills,light fittings, fixtures, smoke detectors etc.Main\"T\" runners to besuspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm die and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 71 | 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. |
| 72 | 12 mm cement plaster of mix :_1:4 (1 cement: 4 fine sand) |
| 73 | Supplying and stacking at site._Good earth |
| 74 | Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading,well ramming, consolidating and grouting with jamuna sand,including finishing smooth etc. complete as per direction of Engineer-in- charge. |
| 75 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarsesand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as perdirection of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 76 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour &pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge._60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 77 | Add for revised GST @18% in place of 12% ie 6.33% |
| 78 | ELECTRICAL WORK |
| 79 | Provision ofElectrical work inPorta cabin class rooms, labs/halls at AJKMCRC, Jamia Millia Islamia |
| 80 | W I R I N G |
| 81 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 82 | Group C |
| 83 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 84 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 85 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 86 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 87 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 88 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 89 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 90 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 91 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 92 | Upto 450 mm sweep |
| 93 | MCCB, MCB & DB’S |
| 94 | Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 95 | 100 Amp, 16 KA |
| 96 | Supplying and fixing of following ways surface/ recess mounting,vertical type, 415 V, TPN MCB distribution board of sheet steel,dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 97 | 4 way (4 + 12), Double door |
| 98 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 99 | Single pole |
| 100 | Double pole |
| 101 | CABLE TRAYS |
| 102 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, paintingsuspenders etc as required. |
| 103 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 104 | Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. |
| 105 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 106 | Supplying and installing following size of perforated pre-painted M.S. cable trays reducers with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. |
| 107 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 108 | E A R T H I N G |
| 109 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. |
| 110 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 111 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 112 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 113 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 114 | MV CABLE LAYING |
| 115 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 116 | Upto 35 sq. mm |
| 117 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 118 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 119 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 120 | Upto 35 sq. mm |
| 121 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 122 | Upto 35 sq. mm |
| 123 | MV CABLE JOINTING & END TERMINATION |
| 124 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 125 | 4 X 35 sq. mm (32mm) |
| 126 | CIVIL ITEMS |
| 127 | Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres. |
| 128 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 129 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required._100 mm dia |
| 130 | Non Schedule items |
| 131 | Supply following size of PVC insulated XLPE Power cable of 1.1 KV grade alum.conductor armoured cable 4 X 35 Sq.mm make SKYTONE or equivalent |
| 132 | Supply of Led battan 1x20 watt Surface mountedSILM LINE NEXT,or equivalent /PHILIPS ,WIPRO |
| 133 | Supply at site wallfan 400 mmcomplete with connections crompton /orientmake ar as required at site |
| 134 | Supply at site LED 30 watt panel light recess mounted 2 ft x 2 ft philips make or as required at site. |
| 135 | Supply of Crompton Greaves ventilation fan 250 mm or equivalent make, etc. as required at site. |
| 136 | Supply at site A.C Celing fan 48\"\" sweep double ball bearing complete with connections crompton /orient PSPO NEW Brreez |
| 137 | Supply at site LED 200 watt flood light (6500 k) havells make or as required at site. |
AI Tender Summary
Tender Timeline
Aug 30, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 10, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender