|
| 1 | Dismantling of old rusted plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed. |
| 2 | S&F 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook boltsand washers in roofs,walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 3 | S&F0.63 mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips valley gutters,drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 4 | Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed. |
| 5 | S&F rolled mild steel sections like angle, channel, flat etc as inframed work such as grills,gratings,etc,with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars;barred iron doors;ladders ;framed balusters;walk ways;railings;framedwork of water tanks andsimilar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge. |
| 6 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed. |
| 7 | Dismantling of wall & ceiling boards (fiber, pulp, insulation etc) or insulation boards /slabs /blanketsany thickness, including cover fillets complete all as specified and directed. |
| 8 | Providing and fixing tiled false ceiling of size 595x595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanized steel section (galvanized @ 120 gms/sqm, both side inclusive) consisting of 3600mm long main \"T\" runner size 24x38mm and 0.30mm thick, 1200mm long cross \"T\" of size 24x25mm and 0.30mm thick, 600mm secondary cross \"T\" of size 24x25mm and 0.30mm thick and PPGI wall angle of size 24x24mm and 0.4mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main\"T\" runners are then suspended from ceiling using GI slotted cleats of size 27x37x25x1.6m fixed to ceiling with 8mm dia and 45mm long dashfasterners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8mm spaced at max 1200mm center to center along main T and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent = wall, then 1200mm long cross \"T\" is interlocked between the main \"T\" at 600mm center to center to form a grid of 1200x600mm and then secondary cross \"T\" of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally whitecoloured Gyproc 9mm thick Dew Drop/Granular tiles of size 595x595 having foil on back side & PVC paper on front side wrapped around edges to be placed in grid complete all as specified and directed. |
| 9 | Demolition ofbrickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed. |
| 10 | M&L brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed. |
| 11 | Demolition of cement concreteunreinforced in ground floors, kota stone, granite flooring, tiles flooring andpavingsnot exceeding15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed. |
| 12 | M&L plain cement concrete,1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in surface channels or drains etc,complete all as specified and directed. |
| 13 | M&L 50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/footpath finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundations,filling and mass concretecomplete all as specified and directed. |
| 15 | Taking down cement plaster including tiles of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 16 | Rendering 15mm thick plaster on fair faces of brick work/stone masonry, concrete surface in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 17 | Rendering 15mm thick plaster on fair faces of brick work/stone masonry, concrete surface in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 18 | Rendering 5mm thick plaster on ceiling or concrete surface in CM 1:3, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L preparation of newlyplastered or unplastered surfaces of wallsand applying two coats ofdistemper oil emulsionand applying plaster of paris putty of 1mm thick over newly plastered wall surfaces including preparation of surface even and smooth complete all as specified and directed. |
| 20 | M&L preparation of oldplastered or unplastered surfaces of wallsand applying two coats ofdistemper oil emulsionand applying plaster of paris putty of 1mm thick overplastered wall surfaces including preparation of surface even and smooth complete all as specified and directed. |
| 21 | M&L preparation of newlyplastered or unplastered surfaces of wallsand applying two coats ofcement base paint complete all as specified and directed. |
| 22 | M&L preparation of oldplastered or unplastered surfaces of wallsand applying two coats ofcement base paint complete all as specified and directed. |
| 23 | M&L preparation of newlysurface of ceilingand applying two coats ofwhite wash on old decorated surface complete all as specified and directed. |
| 24 | M&L preparation of old surface of ceilingand applying two coats ofwhite wash on old decorated surface complete all as specified and directed. |
| 25 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 sqm but n.exc. 4 sqm each complete all as specified and directed. |
| 26 | Taking down shutters of any description exc 1sqm but n. exc 2 sqm each complete all as specified and directed. |
| 27 | S&F factory made Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and providing one shop coat of primer and taring back side of frame complete all as specified and directed. |
| 28 | S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed. |
| 29 | M&L plain cement concrete 1:2:4 type B0 (using 12.50 mm graded crushed stone aggregate) cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones(fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed. |
| 30 | S&F 35mm thick factory made 2nd class hard wood rail and styleplain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board withcommercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 31 | S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 32 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixedwith tinned tacks or galvanised wire staples,complete all as specified and directed. |
| 33 | M&L preparation of new surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 34 | M&L preparation of old surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying one coat of synthetic enamel paint over existing surface complete all as specified and directed. |
| 35 | Prepartion of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint,complete all as specified and directed. |
| 36 | Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 37 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed. |
| 38 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames,metal frames including punching or drilling out old glazing pins/spring clips , or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 39 | S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 ,complete all as specified. |
| 40 | S&F 100 mm size aluminium butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised, type B-21complete all as specified and directed. |
| 41 | S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 42 | S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 43 | S&F 250 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 44 | S&F 300mm, ordinary door springs including roller and roller plate complete all as specified and directed. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 46 | M&LNon-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular)area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed. |
| 47 | M&LNon-skid,coloured ceramic tiles 7 to 8mm thick (Square/rectangular)area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed. |
| 48 | M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting/dado etc. laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured to match the tiles complete all as specified and directed. |
| 49 | S&F 20mm thick granite (green colour) stone machine cut, in kitchen slab laid over cement screed and jointed with cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 50 | M&L 25 mm thick PCC 1:2:4 type B-1 (20 mm graded stone aggregate) as in leveling course offlooring or levelling course of roof etc, complete all as specified and directed |
| 51 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed. |
| 52 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails.M.S. frame shall be covered with heat molded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed. |
| 53 | Dismantling 75/100mm dia cast/PVC drain pipe, jointed in cement mortar fixed in trenches and taking out of trenches removing where directed complete all as specified and directedd. |
| 54 | S&F 75mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors, complete all as specified and directed. |
| 55 | S&F 110mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors, complete all as specified and directed. |
| 56 | S&F 75mm bore PVC (SWR) bendscomplete all as specified and directed. |
| 57 | S&F 75mm bore PVC (SWR) junction,(single T) equal or unequal with oval access door ,complete all as specified and directed. |
| 58 | S&F 110mm bore PVC (SWR) bendscomplete all as specified and directed. |
| 59 | S&F 110mm bore PVC (SWR) junction,(single T) equal or unequal with oval access door ,complete all as specified and directed. |
| 60 | S&F 75mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cementcomplete all as specified and directed. |
| 61 | S&F PVC (SWR) vent cowl 100/100 bore dia, complete all as specified and directed. |
| 62 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GInipple for inlet, outlet, washout and overflow etc,including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling complete all as specified and directed. |
| 63 | S&F in repairs vitreous China squatting pan orissa pattern size 580mm x 440mm white with integral foot rest (including making good the disturbed portion as per surrounding areas excluding flushing cistern and flush pipe) including PVS (SWR) \"S\"trap, provn of lime concrete and jointing to flush pipe (fixed in repair) all as specified. |
| 64 | S&F in repairs vitreous china wash downEuropian water closet pan (Padestal Pattern), including connection to flush pipe, \"P\" or \"S\" trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one complete all as specified and directed. |
| 65 | S&F in repairs 10 litres capacity PVC valve less symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle including brackets & 32 mm size PVC flush pipe, complete all as specified and directed. |
| 66 | S&F PVC connection 15mm size, 600 mm long with PTMT nuts complete all as specified and directed. |
| 67 | S&F Vitreous china, wash hand basin, (white) of size 550mm x 400mm including brass CP waste coupling 32mm size with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified and directed. |
| 68 | S&F in repairs aluminium anodised tubular towel rail, 20mm dia, Dtype 60cm long , fixed to wall with CP brass screw and PVC rawl plugs, complete all as specified and directed. |
| 69 | S&F in repairs, fancy type, chromium plated, bib tap,cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed. |
| 70 | S&F in repairs, fancy type, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" & \"Cold\" with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed. |
| 71 | S&F in repairs stop valve/angle valve, cast copper alloy, fancy type, chromiun plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed. |
| 72 | S&F in repairs 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for GI tubing complete all as specified and directed. |
| 73 | S&F in repairs swivel shower of PTMT any colour for fixing with shower arms 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minium eight 40gms) complete all as specified and directed. |
| 74 | Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specifed and directed.. |
| 75 | Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from sitecomplete all as specified and directed |
| 76 | Taking up or down 25mm bore steel tubing and connection, including cleaning for refixing or removal from sitecomplete all as specified and directed |
| 77 | S&F steel water tubing, 15 mm bore, galvanised , \"medium grade\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 78 | S&F steel water tubing, 20 mm bore, galvanised , \"medium grade\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 79 | S&F steel water tubing, 25 mm bore, galvanised , \"medium grade\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 80 | Cutting chase, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing,steps, cills, sunshades, shelves,lintels,etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting exc. 10cm but not exc. 20 cm girth complete all as specified and directed. |
| 81 | S&F 18/19mm thick prelaminated particle board/MDF board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete as directed. |
| 82 | M&L 2nd class softwood plain fillets, square/rectangular, wrought face of sectional area not exc 3 Sqcm, secured with nails complete allas specified and directed. |
| 83 | S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed. |
| 84 | S&F kitchen plate rack made of SS 0.80mm thick sheet standered size 900x900x325mm and designed as approved by GE fixed to wall with wooden/ plastic plug and screw complete all as specified as diracted. |
| 85 | S&F kitchen basket fabricated with stainless steel section (SS-304), best quality of size 450x500x100mm for different use such as placing plain plate/dish/cup & saucer/cultery/thali etc fixed in position with one pair telescopic channel mild steel chromium plated, roller type, heavy duty complete all as specified and directed. |
| 86 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330m x 160mm complete all as specified and directed. |
| 87 | S&F 30mm continuous (piano) hinges, mild steel bright finish or electrogalvanised complete all as specified and directed. |
| 88 | M&L PCC 1:2:4 type B-1 (using 20mm crushed stone aggregate) as in filling under sunken floors complete all as specified and directed. |
| 89 | M&L 15mm thick (average) screed bed/plaster in cement mortar 1:3 in order to maintain proper slope and base over existing roof surface for laying of APP based polymeric membrane, mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.(Note:- WPC and polymeric memebrane shall be measured and paid separately) |
| 90 | S&F High performance two component brushable elastomeric poly urea waterproofing coating cold applied brush applied ultraseal BA or approved equivalent (in sunken portion of WC & floor trap) liquid membrane with white in colour with a elongination of 500% and tensile strength of 5 N/sq mm @ DFT 1mm as per ASTM D 2370.73 % solid content, shore A hardness of min 70. The system include final base preparation, epoxy primer application @200-250 gms/sqmt depending upon the surface porosity and applying home shild ultraseal BA or approved equivalent in two coats at 1.5 kg sqm providing 1.2 mm DFT etc, complete as per manufacture specification. |
| 91 | Supply only liquid water proofing compound complete all as specified and directed. |
| 92 | S&F PVC coated mild steel conduit pipe 25mm dia (Drapery rod) with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door/windows, each opening n exc 1.50 mtr, contained with a pair of clamps and ap pair of side ornamental attachments complete all as specified & directed. |
