Tender For Providing Dg Connection And Electrical Panel System To Main Pump House At Lower Sump At Gc, Crpf, Kathgodam, Distt-Nainital (Uttrakhand)
Tender Value
11.91 Lakhs
Estimated cost
Bid Submission
03 Sep 2024
0 days left
EMD
23838
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kathgodam → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Dg Connection And Electrical Panel System To Main Pump House At Lower Sump At Gc, Crpf, Kathgodam, Distt-Nainital (Uttrakhand) Providing Dg Connection And Electrical Panel System To Main Pump House At Lower Sump
BOQ
| Sl. No. | Item Description |
| 1 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 2 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer\"s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 3 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 4 | Cement plaster 1:3 (1 Cement : 3 Coarse sand) finsihed with a floating coat of neat cement. 12 mm cement plaster. |
| 5 | Shifting of existing 125 KVA DG set installed inside Panel room of main Power house-I in upper campus i/c lifting and shifting of DG set by manual of mechanical means/Hydra up to 1800 Meter and re-installation of DG set to desired area by providing & fixing of foundation for DG set. (1800 meter by road distance) |
| 6 | Providing complete Servicing through the OMEof DG set (Make Kirloskar) i/c replacement of mobile oil, air/fuel filters, coolant, hose, on/off/start switches, etc as required. |
| 7 | Supplying and laying of following size XLPE insulated, armoured, power cable of 1.1 KV grade, duly ISI marked, with alluminium conducter, confirming to IS:7098 (Part-I) in existing RCC/HUME/GI/DWC HDPE pipe, as required. 3X1/2X70 Sq.mm (3.5 core) |
| 8 | Supplying and laying of following size XLPE insulated, armoured, power cable of 1.1 KV grade, duly ISI marked, with alluminium conducter, confirming to IS:7098 (Part-I) in existing RCC/HUME/GI/DWC HDPE pipe, as required. 3X1/2X95 Sq.mm (3.5 core) |
| 9 | Supplying and laying of following size DWC HDPE pipe ISI marked alongwith all accessories like socket, bend, coupler etc confirming to IS 14930, part-II complete with fitting, cutting and jointng etc. direct in ground (75mm below from ground level) including exczvation and refilling trench but excluding sand crushioning and protective covering etc, complete as required. 63 mm dia (OD-63mm & ID-51mm nominal) |
| 10 | Supplying and making end terminal with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheled/XLPE aluminium conducter cable of 1.1 KV grade as required. 3.5 core 70 Sqmm |
| 11 | Supplying and making end terminal with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheled/XLPE aluminium conducter cable of 1.1 KV grade as required. 3.5 core 95 Sqmm |
| 12 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 13 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 14 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 15 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 16 | Fabrication, installation, testing and commisioning of automatic mains failure control including bypass panel,suitable for 125 KVA seilent type DG set complete with relays, timers, set of CTs of metering & protection and energy analyser to frequency power factor, KWH, KVARH & provision for overload, short circuit capacity, restricted earth fault, under frequency, suitable capacity control cabbling from AMF panel to diesel engine and elsewhere if require all complete and locking including and control cable for interconnections with AMF panel. and the following: MCC cum AMF panel. Estimated cost of electrical Switch boards Rs. 3,70,275/-. (Note:- List of items approved makes and model mentioned at Appendix-F of NIT) |
AI Tender Summary
Tender Timeline
Aug 29, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 04, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender