Tender For Annual Repair And Maintenance Of Works At Fsd Tuensang For The Year 2024-25 Sh Painting Of Sheds, Ancillaries And Other Misc. Works
Tender Overview
Project Description
Tender For Annual Repair And Maintenance Of Works At Fsd Tuensang For The Year 2024-25 Sh Painting Of Sheds, Ancillaries And Other Misc. Works
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Sep-2024 | DATE | Date | 13-Sep-2024 |
| 2 | 09-Sep-2024 | EMD | Fee | 13-Sep-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) cum |
| 4 | Cement Concrete flooring 1:2:4 (1 cement: 2 coarse sand :4 graded stone aggregate ) finished with a floating coat of neat cement , including cement slurry , but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm niminal size stone aggregate. |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 6 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 7 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 8 | 12 mm cement plaster of mix of 1:6 (1 cement: 6 fine sand) |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre , of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: New work ( two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 11 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 lit/10 sqm) |
| 12 | White washing with lime to give an even shade : Old work (two or more coats) |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new workover and under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 14 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all completeWith 12 mm mild steel U beading |
| 15 | Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with : 4.0 mm thick glass panes |
| 16 | Supplying of spring for rolling shutter 27.5 cm long manufactured from high tensile steel wire of required strength as per direction of Engineer-in-charge |
| 17 | Repairing and greasing of rolling shutter including tightening / replacement of spring wherever required including replacement of damaged strips and side koni complete, repair of shutter as per the direction of Engineer-in-charge (This excludes the cost of springbut including the cost of side koni and strips). |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender