Tender For Supply And Installation Of 20 Meter High Mast Light In Village- Kanwara Bypass (Jheel Ka Purwa) At District- Banda
Tender Value
18.95 Lakhs
Estimated cost
Bid Submission
30 Aug 2024
0 days left
EMD
38000
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
purwa → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Installation Of 20 Meter High Mast Light In Village- Kanwara Bypass (Jheel Ka Purwa) At District- Banda
BOQ
| Sl. No. | Item Description |
| 1 | S/F of 400 Amp 415 V Metal clade TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 2 | Supply & Laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitablesize or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 3 | 16 sq.mm x 4 core. |
| 4 | Supply & fixing of 25 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 460 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories forhigh mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 5 | Supply & Laying of 32 mm x 6 mm G.I. Strip from earth electrode directly in the ground as required complete in all respect. |
| 6 | Supply and burring of Safe Earthing Electrode T-39 (copper coated), Length up to 3000mm, outer pipe 76.3mmx3.2mm, inner Dia 42.4mm x 2.6 mm,terminal dia 12mm coating 80x100 micronfilled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) |
| 7 | Supply and burring of Safe Earthing Electrode T-19 (copper coated), Length up to 3000mm, outer pipe 48.4mmx3.2mm, inner Dia 26.9mm x 2.6 mm,terminal dia 12mm coating 80x100 micronfilled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) |
| 8 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc, complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc.The board shall have suitable capacity electroytic alumininum busbars as per 158623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc.The job includes the grounting of the bourd as per direction of Engineer- in-Charge. All coutgoing switches of 100 Amp, and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.100 Amp TPN-5,63Amp TPN-1 and 32AMP TPN-1To Control of 16 nos LED Lights |
| 9 | Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS: 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. |
| 10 | Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge. |
| 11 | Supply and fixing of stadium LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 400 Watt. Confirming to IP 66 protection complete in all respect. |
| 12 | Errection and commissioning and supervision of above highmast lighting system includinbg wiring &fixingof luminaire with modern engineering practices including design (For 3 Years by Light Manufacturer) |
| 13 | Supply of GLS type twin done aviation obstruction light of BJA OI-2 |
| 14 | S/F of Reflective retro sign board 3\"X2\" with angle iron supporting nut bolt etc. Complete in all respect |
| 15 | MS Cage Suitable for 24 Nos.LED Flood Light with required nut & boalts |
| 16 | GST extra as per Applicable |
AI Tender Summary
Tender Timeline
Aug 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 30, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 30, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender