Tender For Electrification Of Office Room ,Security Room And Additional Works Of Pumping Machinery Including Installation Of Gaseous Chlorination System At Glr-7 At Joynagar-Ii Under Smd,Phe Dte.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Sep 2024
0 days left
EMD
2.35 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jaynagar → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Electrification Of Office Room ,Security Room And Additional Works Of Pumping Machinery Including Installation Of Gaseous Chlorination System At Glr-7 At Joynagar-Ii Under Smd,Phe Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Distn. wiring in 2x22/0.3 (1.5 sqmm) (Ph. & N) and 1x22/0.3 (1.5 sqmm) as ECC single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish |
| 2 | OFFICE BUILDING (Ground Floor,First Floor,Second Floor,Roof,Staff Quarter,Security Room.) |
| 3 | Average Run 8 mtr |
| 4 | Average Run 10 mtr |
| 5 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light points with 2 no. 2 way Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish.(Average Run 10 mtr) |
| 6 | Distn. wiring in 2x22/0.3 (1.5 sqmm) (Ph. & N) and 1x22/0.3 (1.5 sqmm) as ECC single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish.(On Board) |
| 7 | Supply and fixing GI modular Switch Boardof the following sizes complete withthree no. suitable size Cu bar with holes ( for P, N & E) fixed on bakelite/hard rubber insulator over the MS welded chair incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, paint and mending good the damages: |
| 8 | 2 module |
| 9 | 8 module |
| 10 | 2 Row 12 Module |
| 11 | Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. |
| 12 | Inspection/ Draw Box: |
| 13 | Supplying and fixing sheet metal inspection box (16SWG) of the following sizes finished in slab during casting/wall by housing the same after cutting brick wall incl. making earthing attachment, painting, finished with suitable size top cover of bakelite/ perspex and brass screw and mending good damages to building works. |
| 14 | 100mm x 100mm x 65mm |
| 15 | 150mm x 100mm x 65mm |
| 16 | 175mm x 100mm x 65mm |
| 17 | Supplying & Fixing 240 V AC/DC superior type Multitune (min 10 nos. tune) Call Bell (Anchor) with selector switch for single/Multi Tunes mode, Battery operated on HW board incl. S&F HW board |
| 18 | Supply & Fixing 240V, Modular Socket type (2 Module) fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. |
| 19 | Supplying and drawing 1.1 KV single core stranded \"FRLS\" PVC insulated & unsheathed single core stranded copper wire of following sizes in the polythene pipe and making necy. connection as reqd. |
| 20 | 3x 22/0.3 (1.5 sqmm) as ECC |
| 21 | 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm)as ECC |
| 22 | 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC |
| 23 | 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC |
| 24 | Supply of following size L.T. cable, working voltage 1.1 KV grade, heavy duty XLPE insulated, armoured, screened, stranded, Al distribution power conductor cable. |
| 25 | 3.5C,120 sqmm. |
| 26 | 4C, 16 sqmm. |
| 27 | 2C, 10 sqmm. |
| 28 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 29 | Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 30 | Havells Crabtree Athena 10/25A Three Pin Combined Shutter Socket |
| 31 | MCB Distribution Board (Double Door): |
| 32 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. |
| 33 | 6-32ASP MCB (Make Legrand) |
| 34 | 6-32ADP MCB (Make Legrand) |
| 35 | 32A4P MCB (Make Legrand) |
| 36 | 40A4P MCB (Make Legrand) |
| 37 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthingattachment. |
| 38 | 2+8 way Ddouble Door SPN DB. (Make Legrand) |
| 39 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment |
| 40 | 4 way(Make Legrand) |
| 41 | 6 way (Make Legrand) |
| 42 | Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.(2way) |
| 43 | Cable Laying |
| 44 | Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and paintin |
| 45 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. |
| 46 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : |
| 47 | For 3½ core upto 120 sqmm |
| 48 | For 4 core upto 16 sqmm |
| 49 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : |
| 50 | For 3½ core upto 120 sqmm |
| 51 | For 4 core upto 16 sqmm |
| 52 | Modular Starter Box: |
| 53 | Supply & Fixing 240 V, 25A Modular starter (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc |
| 54 | SUPPLY OF FITTINGS LIGHT & FAN: |
| 55 | 40W Smart Bright Xtra S4 Industrial Batten Smart Bright BN100 S4 expands the application scope of BN100 Batten family with upgraded specification and additional features ensuring sustained lighting performance in harsh conditions. This all new S4 version is available in IP40 ingress rating and THD<10%.(make: BN100C LED40S-6500 PSU L120 GR S4 of Phillips/bajaj/Havells). |
| 56 | 20W Smart Bright Xtra S4 Industrial Batten Smart Bright BN100 S4 expands the application scope of BN100 Batten family with upgraded specification and additional features ensuring sustained lighting performance in harsh conditions. This all new S4 version is available in IP40 ingress rating and THD<10%.(make: BN100C LED20S-6500 PSU L120 GR S4 of Phillips/bajaj/Havells). |
| 57 | 12W Extruded aluminium batten available in 2ft run length with multiple lumen packages and suitable for surface, wall.(make: BN 021 LED12S 6500 PSU GR of Phillips/bajaj/Havells). |
| 58 | PHILIPS 6-wattLED Decorative Wall Light/Wall Lamp | Jade Indoor Wall Lamp for Living Room & Bedroom. (make: 9192158509-1 of Phillips/bajaj/Havells). |
| 59 | 6W Lighting Fixtures Black Modern Bathroom Bedroom Wall Lighting for Mirror(White) High-quality Metal alloy and acrylic with no rust, surface frosted lacquer paint treatment, not easy to oxidation, don\"t fade. LED power saving and durable,Suitable for :- Modern bathroom led vanity light. Ideal for using as lighting in bathrooms, bedroom.(make 30973 of PHILIPS/bajaj /Havells). |
| 60 | 6W EnduraLED Bulkhead Pressure die cast housing LED bulkhead with IP66 protection and IK09 impact resistance suitable for surface and wall mounting applications.(make WT202W LED6S NW PSU S2 PC of PHILIPS/bajaj /Havells). |
| 61 | 115W GreenLine V2 is an IP66 road lighting luminaire with single die ceramic base high power LED light source, PDC housing, toughened glass cover and unique peanut lens to ensure uniform light distribution, higher spacing between poles and maintenance free system. (make BRP409 LED115 CW SLC FG PSU GR V2 of PHILIPS/bajaj /Havells). |
| 62 | 140W Tango Mini is a flood lighting luminaire with single die ceramic base high power LED, PDC housing and unique flood optics (NB) to ensure uniform distribution. Maintenance free system, ideal for area lighting, billboard lighting and mini mast lighting.(make BVP192 LED145 CW NB FG GR PSU of PHILIPS/bajaj /Havells).(for Security Room) |
| 63 | Town Glow is a contemporary designer IP66/IK10 Post Top lantern with symmetric light distribution.(make BGP300 LED28 757 PSU PC IN S1 of PHILIPS/bajaj /Havells). |
| 64 | 1200mm (48\") RPM: 320, Air delivery: 230 CMM sweep ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S & F connecting wire for down rod upto 30 cm incl. painting the rod with making necessary connection as required by 2x1.5 sq.mm flexible copper wire suitable for 230 V. AC. supply etc. as reqd. ( Make:B0BN8WKC1G of Orient/ Pospo/Havells). |
| 65 | 300mm dia. Metal body heavy duty exhaust fan after making hole in wall and making good damages and smoth cement finish etc. as practicable wire and making connectin for exhaust fan.(MaKe: FHEHDSPDB120 ofhavells/Orient/usha). |
| 66 | Supplying of 400mm sweep oscellating type wall bracket fan complete with wirw guard blade protection and in built regulator complete with connection testing required.MaKe:(FHWABHSWHT18 OF HAVELLS/Usha/Orient |
| 67 | Power Coated GI Wall Mounted Street Light Bracket, For Outdoor, street light |
| 68 | Stainless Steel Rectangular Sintex Street Light Junction Box, For Industrial, IP44 |
| 69 | Havells Instanio 3-Litre Instant Geyser LED Indicator: Colour-changing LEDs that change from blue to amber to indicate the hotness of the water Outer Body: Rust and shock proof ABS outer body for long lifeInner Tank: Stainless steel inner tank of 304 grade Power Cord: Fire reta rdant power cord for maximum safety 0.65 MPa Bar Pressure: Suitable for high rise buildings and pressure pump applications B078JDNZJ8 of havells |
| 70 | LT PANEL : |
| 71 | 1 Nos 160A4P electrically operated, motorised -cum-manual spring charged withdrawable type MCCB of rated service voltage upto 690V, 50 HZ with manual push buttons, indications, current sensors, CTs, etc confoirming to the spedfication and as follows: |
| 72 | Icu-36 KA (at 415V, 50 HZ), Ics=100% Icu and Icw not less than 50 KA for 1 Sec. |
| 73 | Thermo-magnetic based O/L & S/C releases. |
| 74 | Rated impulse withstand voltage not less than 12 KV for main conducting paths. |
| 75 | Auxiliary contacts, shunt trip coils etc. |
| 76 | 1 sets. - Core Balance CT with earth leakage relay. |
| 77 | 1 sets CT Operated Digital Multifunction Meter having Cl-1 accuracy and showing (A, V, F, Maximum Demand). |
| 78 | 1 Set (3 Nos/Set) 150/5-5A Dual Core cast resin type Current Transformer of CL-5P10 for protection and CL-1 for metering with 15VA burden each |
| 79 | 1 sets -CT Operated 3 O/C + 1 E/F RELAY having protection class 5P10 . |
| 80 | 1 Sets (3 Nos/Set) - Cast Resin Construction Type Potential Transformer 415 V/√3 : 110V/√3 with Cl - 0.1 accuracy with 100 VA burden with HRC fuses at primary and secondary for protection. |
| 81 | 1 sets (3 nos each) RYB cluster type LED phase indlcation lamps. |
| 82 | 1 sets - ON/OFF/TRIP cluster type LED indication lamps. |
| 83 | BUSBAR |
| 84 | 1 sets -160A, 415V, 50HZ, 31 MVA Amps symmetrical continuous rated Aluminium busbars ( 4 Nos. 50mmX10mm for phases and 1 Nos. 50mmX10mm for neutral) mounted on suitable hylam/ DMC/SMC insulators/supports with proper graded colour coded heat shrinkable PVC sleeves. Surge protection device with MPCB with rated KA. |
| 85 | OUTGOING |
| 86 | a) 7 Nos 40A, 4P MCB of rated service voltage upto 690V, 50 HZ with manual push buttons, indications, current sensors, CTs, etc confoirming to the spedfication and as follows: |
| 87 | b) 2 Nos 32A, 4P MCB of rated service voltage upto 290V, 50 HZ with manual push buttons, indications, current sensors, CTs, etc confoirming to the spedfication and as follows: |
| 88 | c) 3 Nos 32A, DP MCB of rated service voltage upto 290V, 50 HZ with manual push buttons, indications, current sensors, CTs, etc confoirming to the spedfication and as follows: |
| 89 | Complete Board as stated above. |
| 90 | Supply & fixing Rectangular Metal Street Lights Timer Box with Digital 24 hour ,32 A TPContactor, 40 A TP MCB (IHXTS03060 of Havells) |
| 91 | EARTHING : |
| 92 | Excavation of soil for installation of Earth Electrode and filling & ramming.(soft soil) |
| 93 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: |
| 94 | By Tata Medium GI pipe |
| 95 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe |
| 96 | Extra for treatment of soil by using salt & charcoal or coke for pipe electrode |
| 97 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 98 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages |
| 99 | No. 8 SWG |
| 100 | Supply, delivery and storage at site of heavy grade MS ERW pipe as per IS: 3589 with necessary fittings like bend, flanges, expander, reducer etc. for following sizes for individual suction, delivery and common headers line for the clear water pumps. |
| 101 | DN 600, 8 mm thick (length consider upto valve) |
| 102 | DN 450,8 mm thick (length consider upto valve) |
| 103 | Supply, delivery and storage at site of MS fabricated bell mouth of following sizes |
| 104 | DN700 X DN600 X 400 mm Long |
| 105 | Supply, delivery and storage at site of MS fabricated companion flanges (FF, IS:6392, Tab 11), drilling to match as per IS 1538 table 4&6 |
| 106 | DN600 blank flange |
| 107 | DN450 blank flange |
| 108 | DN450 slip on flange as per IS:1538 |
| 109 | DN600 slip on flange as per IS:1539 |
| 110 | DN500 slip on flange as per IS:1539 |
| 111 | Supply, delivery and storage at site of MS flangedDismantling joint for the following sizes |
| 112 | DN 600 for common header line |
| 113 | DN 600 for Suctionline |
| 114 | DN 500 for common header and CWR inlet pipe line |
| 115 | Supply, delivery and storage at site of MS fabricated puddle coller short pices as per suitable for PN 1.0 rating for thefollowing sizes |
| 116 | DN600 ,600 mm long for suction line |
| 117 | DN450 ,600 mm long for delivery line |
| 118 | Supply,delivary and storage at siteof C.I.D.F Non rising spindle Sluice valve(Manual with gear) as per IS: 14846, suitable for PN 1.6 rating. [Make: IVI/JUPITAR/DURGA] |
| 119 | Nonimnal dia.: 600 mm for suction. |
| 120 | Supply, delivery and storage at site of C.I.D.F.motorised butterfly valve of following sizes as per IS: 13095, suitable for PN 1.6 rating along with actuator. [Make: IVI/JUPITAR/DURGA] |
| 121 | DN 600 for common header line |
| 122 | Supply, delivery and storage at site of C.I.D.F. swing check Non return valve (Tilting Dise Check Valve) as per IS:5312, Part-1 suitable for PN 1.0 rating. |
| 123 | Nominal dia: 600 mm for delivery. |
| 124 | Supply, delivery and storage at site of MS fabricated 90 degreebend of radius 1.5 D |
| 125 | DN 600 for suction line |
| 126 | Supply, delivery and storage at site 2 mm thick CRCA steel enclosed IP-54 LPBS for pump sets in compliance with NIT specification. |
| 127 | Supply, delivery and storage at site 2 mm thick CRCA steel enclosed IP-54 LPBS for motorized valves in compliance with NIT specification |
| 128 | Supply, delivery and storage at site K150 modelElectric operated acctuator for motorized 450mm dia butterfly valves at delivery side.(Rotork/Limitork) |
| 129 | 3 core, 95 sq. mm, 1.1 KV grade XLPE flexible Copper Cable (JB of main pump to motor, three feeders with 2 |
| 130 | 3.5 core, 95 sq. mm, 1.1 KV grade XLPE flexible aluminium Cable (PDB cum MCC to APFC panel.two feeders with 1 lenth per feeder) |
| 131 | Pressure Transmitter 0-10Bar: Measuring Principle Gauge pressure. capacitive sensor with ceramics measuring diaphragm , Supply voltage: 10-30 V DC; Reference Accuracy 0.15 %; Long term stability 0.2 % of URL/year Process temperature -25 °C+85 °C; Ambient temperature -40 °C+70 °C; Measuring cell +400mbar+10 bar Max. overpressure limit max. 40 bar (600 psi); Process connection ThreadsCommunication 4-20mA; Display: LCD, push button on display/electronics Housing: F31 Alu, glass window including Protection Panel. with Inbuilt Surge Protection, SMPS, MCB, the transmitter to be mounted inside the prewired panel.Make: Endress+Hauser India Pvt. Ltd./ Siemens/ Any approved vendor of PHED |
| 132 | For Inlet: Full Bore Electromagnetic Flowmeter - DN 500 Protection: IP68 (Minimum inbuilt 20 meter cable, factory potted), Full bore type Electro Magnetic Flow meter With Remote Smart Transmitter cum display (Volume Flow rate output: 4-20mA HART/Modbus Output and Totalizer Pulse Output: 0.05cu.m /Pulse) With LCD backlit Display, Calibration lab as per ISO 17025 , Accuracy: 0.5% , +/- 2mm/sec, Measuring,Reference & Empty Pipe Detection Electrode withPolyurethane/Hard Rubber Liner ,Supply: 24V DC/230 V AC including Protection Panel. with Inbuilt Surge Protection, SMPS, MCB, the transmitter to be mounted inside the prewired panel.Make: Endress+Hauser India Pvt. Ltd./ Siemens/ Any approved vendor of PHED |
| 133 | Level Transmitter(Radar type) + Relay Panel: Reliable measuring: for changing medias, pressure, temperatures, gas phases. Floodable sensor design: IP68/NEMA6P Approval: Non-hazardous area Power Supply; Output; Operation: 2-wire; 4-20mA HART; Bluetooth (App) configuration Antenna; Max. Measuring Range: 40mm/1-1/2\"; 15m liquid - 40…80oC/-40…176oF Process Connection Rear Side; Material: Thread G1 ISO228; PVDF Process Connection Front Side; Material: Thread ISO228 G1- 1/2; PVDF Cable Length: 20m/65ft + Relay Panel with4 Relay Output The instrument will be supplied with wired Meter Protection Box, consisting of Over Voltage Protection, 24V DC Power Supply and Surge Protection Make: Endress+Hauser India Pvt. Ltd./ Siemens/ Any approved vendor of PHED |
| 134 | Data transmission panel made of 2 mm thick CRCAsheet metal with powder coated paint having followingmaterials:a) Analog to digital convertor card (12 Channel) : 1 Setb) Data processing card : 1 Setc) Net connectivity module : 1 Setd) 6 A DP MCB : 1 Noe) 750 VA isolation transformer : 1 Setf) 600 VA UPS : 1 Nog) SMPS (+12, -12, +5), 500 W : 1 Noh) Software for the system : 1 itemi) Solid Cu PVC/ XLPE insulated pair laid up togetherAl inner sheathed un armoured instrmentation cable-100 mtrMake: ECS/ Any approved vendor of PHED |
| 135 | 15\"\" Exhaust Fan ( Any approved Vendor of PHED ) |
| 136 | 600mm x 600mm GI Cowel cover for exhaust fan |
| 137 | Supply and installation of Indef-M brand 3MT capacity triple super gear chain pully block fitted with suitable gear traveling trolly having 8 mtr. Lift. |
| 138 | Installation of the above supplied item No. 30 to 41 & 45 to 47 by expert engineer/technician by using necessary tools and tackles and supplying all necessary materials for commissioning of the same upto entire satisfaction of the EIC. |
| 139 | Installation of the above supplied flowmeter andpressure transmitter as in Sl. No. 42 to 44 by expert engineer/technician by using necessary tools and tackles and supplying all necessary materials for commissioning of the same upto entire satisfaction of the EIC. NB: the cost inclusive of the extension pipe, nozzle, gatevalve etc as required for installion. |
| 140 | Installation of the above supplied data transmission panel (Sl no-45) and making neccy connection with flowmeters and pressure transmitter by expert engineer/technician by using necessary tools and tackles and supplying all necessary materials for commissioning of the same upto entire satisfaction of the EIC. |
| 141 | 930Kg container (4 nos tonner) filling with chlorine gas and with all necessary certificate and filling permission including carrying to & fro. |
| 142 | Supply of XLPE 1.1 KV grade 3½ C x 70 mm2Aluminium Armor cable |
| 143 | Neutralisation pit as per CPHEO/B.I.S contruction |
| 144 | Internal & external Bidg. Lighting by FRLS wires & LED luminaries as per Eng. Code |
| 145 | Earthing & lighting protection |
| 146 | Erection of Chlorination system (supplied departmentally) & IS-10553 (Part-I) |
| 147 | Commissioning of Gaseous Chlorination system (supplied departmentally) |
| 148 | 3 months trial run and thereafter 12 months operation & maintenance after commissioning with all consumables & labour (except e-bill & chlorine gas its transport) with skilled & unskilled person and schedule testing of safety items. |
| 149 | Add GST @ 18% |
| 150 | Add CESS @ 1% |
AI Tender Summary
Tender Timeline
Aug 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 20, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender