Tender For Construction Of Bhakta Niwas At Shree Gupteshwar / Pataleshwar Sansta , Manjarkhed Kasba, Tq- Chandur Rly , Dist- Amravati.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Aug 2024
0 days left
EMD
65000
Bank guarantee accepted
Document Fee
5600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chandur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Bhakta Niwas At Shree Gupteshwar / Pataleshwar Sansta , Manjarkhed Kasba, Tq- Chandur Rly , Dist- Amravati.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area, stackingand/or spreading as directed, including dewatering , preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting as necessary complete.(LIFT UPTO 1.5 M) |
| 2 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m). By Manual Means |
| 3 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating thebottomsurfaceandsidesofexcavationattherateof5litresofemulsion concentrateof1.0percent of chlorophyrifos per square meter of surface area covering10yearsguaranteeon bond paper. |
| 4 | Filling in plinth and floors with approved excavated materialin 15 cm to 20cm. layers including watering and compaction etc. complete. |
| 5 | Filling in plinth and floors with contractor\"s approved material /murum/stone dust in 15 cm to 20cm. layers including watering and compaction etc. complete. |
| 6 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with sand / grit ramming, watering etc complete. |
| 7 | Providing and laying Cast in situ cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand |
| 8 | Providing and laying in situ cementconcrete M-20 oftrap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions including plywood/steel formwork, compaction, curing & rounghing the surface if special finish is to be provided, finishing uneven and honeycombed surface with 1:3 of sufficient minimum thickness to give smooth and even surface etc. complete. (Excluding reinforcement and strucural steel including cover block)the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, trapaulin etc. (Wooden Centering will no be allowed.) |
| 9 | Providing and casting in situ cement concrete M-20 of trap granite/quartzite/gneiss metal for R.C.C. columns as per detaileddrawing and designs, or as directed including steel centering, plywood/steel formwork, compaction,finishing uneven and honeycombed surface with 1:3 of sufficient minimum thickness to give smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. In cuding use of plastisizer wherver necessary as directed Engineer in charge (Excluding reinforcement and structural steel including cover block)the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, trapaulin etc. (Wooden Centering will no be allowed.) |
| 10 | Providing and casting in situ cement concrete M-20 of trap granite/quartzite/gneiss metal for R.C.C. Beams and lintels as per detaileddrawing and designs, or as directed including steel centering, plywood/steel formwork, compaction,finishing uneven and honeycombed surface with 1:3 of sufficient minimum thickness to give smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. In cuding use of plastisizer wherver necessary as directed Engineer in charge (Excluding reinforcement and structural steel including cover block)the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, trapaulin etc. (Wooden Centering will no be allowed.) |
| 11 | Providing and casting in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and including steel centering, plywood/steel formwork, compaction,finishing uneven and honeycombed surface with 1:3 of sufficient minimum thickness to give smooth and even surface or roughening the surface if special finish is to be provided with fan hook box of 2mm thick M.S. Sheet rectangular size 180mmx100mm with required depth with holes or notches as required, bottom and top lids of 1.6mm thick M.S Sheet fixed with 3.5 mm dia. round headed screws together with 12mm dia M.S. bar bent to shape with hooke and painting to exposed surface and curing etc. complete.(Excluding reinforcement and structural steel including cover block)the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, trapaulin etc. (Wooden Centering will no be allowed.) |
| 12 | Providing & casting in situ cement concrete M-20of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed designs & drawing including including steel centering, plywood/steel formwork, compaction,finishing uneven and honeycombed surface with 1:3 of sufficient minimum thickness to give smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. In cuding use of plastisizer wherver necessary as directed Engineer in charge (Excluding reinforcement and structural steel including cover block)the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, trapaulin etc. (Wooden Centering will no be allowed.) |
| 13 | ProvidingandlayingCastinsitu/ReadyMixcementconcretein M-20oftrap/ quartzite/granite/gneissmetalforR.C.C.Waistslab,andstepsofstaircasesasper detaileddesignanddrawings or as directed including steel centering,formwork, steel props, laying/pumping,compaction,finishingunevenandhoneycombedsurface withC.M.1:3ofsufficientminimumthicknesstogiveasmoothandevensurfaceor rougheningthesurfaceifspecialfinishistobeprovidedandcuringetc.complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 14 | Providing and casting in situ cement concrete M-15 of trap/granite/ quartzite/gneiss metal forcoping to plinth or parapet moulded chamfered as per detailed drawings or as directed including steel centering, plywood/steel formwork, compaction,finishing uneven and honeycombed surface with 1:3 of sufficient minimum thickness to give smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel including cover block)the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, trapaulin etc. (Wooden Centering will no be allowed.) |
| 15 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 16 | Providing 2nd class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth of external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering complete. |
| 17 | Providing 2nd class Burnt Bricks masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructureincluding striking joints , raking out joints, watering and scaffolding .complete. |
| 18 | Providing Internal cement plaster 6mm thick in a single coat in cement morter 1:3 without neeru finish to concrete surface in all position including scaffolding and curing. Providing groove at joint of B.B. Masonry and concrete members complete. |
| 19 | Providing internal cement plaster 12mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions includingscaffolding and curing etc. complete. Providing groove at joint of B.B. Masonry and concrete members complete. |
| 20 | Providing Internal cement plaster 20mm thick in a single coat in cement morter 1:3 without neeru finish with cement finish to concrete, brick surface in all position including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete. |
| 21 | Providing and applying putty to old/new plastered surfaces in two coats to receive approved paint in all positions including all materials, labour scaffolding and curing etc. complete. |
| 22 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete |
| 23 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete |
| 24 | Providingandfixingmachinecutmachinepolished18mmto20mmthicktelephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line forthetreadsonbedof1:4Cementmortarincludingfloatfilling jointswithneatcement slurry curing polishing and cleaningetc. complete. |
| 25 | Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite |
| 26 | Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces (excluding the primer coat) complete. |
| 27 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. |
| 28 | Providingandapplyingtwocoatsoftexturedsyntheticpaintofapprovedshadeand quality andonecoatofprimerbeforeapplyingtexturedpaintincludingscaffolding ifnecessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. |
| 29 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 30 | Providingand fixing Country teak wood Four leafpaneled shutters, 35 mm thickstyle andrail and 25 mmthick panels without ventilator as per detailed drawing excluding thedoor frame, stainless steelfixtures and fastening and finishing the wood work with oil painting 3 coats complete |
| 31 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 32 | Providing andfixing inposition(asper1868/1982)Aluminium sliding windowof three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window framebottomtrack section 92 x 31.75 x 1.30 mmat weight1.070 kilogram /One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Runningmetre.Theshuttershouldbeof bearingbottom40x18x1.25mmat weight 0.417Kilogram/One Running Metre. Inter locking section 40x 18x 1.10mm atweight 0.469Kilogram/Running metre. andhandleandtopsection40x 18x1.25mm atweight 0.417Kilogram/Running metre. As per detailed drawings and as directed byEngineerincharge withallnecessary Aluminium sectionsfixturesandfasteningssuchasrollerbearingin nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thickplainglassandaluminiummosquitonetshutterwithstainlesssteeljailwith all required screws and nuts etc, complete. With colour Anodising without box |
| 33 | Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 34 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100 kg etc. complete. |
| 35 | Providing and applying water proofing treatment using acrylic polymer modified cement basedwaterproofingcoatingwithfibreglassmeshmixingattherateof powdertoliquid (2:1) byweightcovering9to10SquareMetre/Kilogramwith twocoatusingapproved chemicals for masonry andconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. |
| 36 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in ChargeS.S.R.Item No.6.36 |
| 37 | Royalty Charges Sand |
| 38 | Royalty Charges metal and Murum |
| 39 | Cement |
| 40 | Aggregate |
| 41 | Sand |
| 42 | Concrete |
| 43 | Bricks |
| 44 | Steel Upto 16 mm(set of 3 bars) |
| 45 | Above 16mm (set of 3 bars). i)Ultimate Tensile Stress. ii)Percentage Elongation.iii) Percentage Proof /yield Stress. iv) Weight per meter. |
| 46 | MurumCompaction test (Proctor Density) |
| 47 | Liquid limit & plastic Limit. |
AI Tender Summary
Tender Timeline
Aug 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 30, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 31, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender