Re E-Tender For Procurement Of Dental Items Used In Dentistry For Two Years From The Date Of Award Of Contract (Aoc)

Sharing tender

RE E-TENDER FOR PROCUREMENT OF DENTAL ITEMS USED IN DENTISTRY FOR TWO YEARS FROM THE DATE OF AWARD OF CONTRACT (AOC)-- 1 Adson Forceps, Toothed Specification: 1.5mm × 2.75mm 1×2 Teeth. 46mm Handle. Made of stainless steel 2 Adson’s forceps non toothed Specification: of length 12.5 cm Made of stainless steel 3 Babcock’s forcep Specification: finger ring, ratcheted, non-perforating forceps used to grasp delicate tissue Made of stainless steel 4 Binocular Compound Microscope Specification: Sharp Image Display with Excellent optical function, Small space occupancy with Integral Stand Design, Low Environment requirement with Anti-mould Technology. Comfortable operation with Ergonomic Design Principle Viewing Head: Compensation Free Binocular Head Inclined at 30° Interpupilary Distance 55-75mm Eyepiece: Wide Field Eyepiece WF10x/18mm with Eye Guard, Achromatic Objective 4x, 10x, 40x, 100x, Focussing Range: Co-axial Coarse and fine adjustment Range 13mm fine division 0.2mm with tension control. Nose Piece: Quadruple Nosepiece, Stage: Double Layer Mechanical Stage 140 x 140 mm/ 75 x 50 mm N.A1.25 Abbe Condenser with Iris Diaphragm. Focussing: Coaxial Coarse & Fine Adjustment System Range 24mm, Fine Division 2mm Illumination: LED Light with Brightness Adjustable. ISO 13485 OR EC Certificate/directive 93/42/EEC) 5 Blades for microtome (High profile) Specification: High Profile 818 Disposable Blades made of stainless steel with exceptional durability. Ultra fine yet durable, 80mm long x 14mm high x 0.35 mm thick suitable for use with microtomes and cryostat series as well as for common cryostat and microtome models Inventive blade coating process provides perceptibly improved results in section stretching and in the quality of sectioning ribbons in routine histology Standard packaging/physical verification of sample may be made 6 Bone rongeur side cutting Specification: Scissor-type handle, cutting edges on side and top of beaks 7 Castrovejo needle holder Specification: Castroviejo Microsurgical Needle Holder is a double spring instrument used for holding small, delicate needles in various microsurgical procedures. It also features a locking mechanism.Made of stainless steel, autoclavable 8 Debackey’s forceps Specification: Length 26 cm, tip width 1.5 mm Made of stainless steel 9 Dental drape kit- disposable Specification: Kit containing: a) 1 pc surgeons drape b) 1pc Disposable tray cover, c) 1pc Half gown for patient, 140x75 cm with tying tape 170 cm, round neck 13 cm c) 1pc head cap of adult size,50 gsm Made of SMS fabric EO sterilized, GMP certified 10 Dental Tweezer Specification: with horizontal serrations at tip, diamond knurling on the outside for good grip, Stainless steel alloy 11 Humby’s knife holder Specification: Made of stainless steel 12 Hydroxyapatite Crystals / Powder Specifications : Synthetic nanocrystalline hydroxyapatite bone graft, 100/200/300/400/500/600/700 microns particle size, Each unit packet contains 1 cc. Price being the same to be supplied as per requirement of the user Standard packaging/physical verification of sample may be made 13 Kocher’s forceps 14cm hemostatic forcep. Specification: It is specifically designed to catch the bleeder that are deep within tissue hence it is ideally used on tough structures Made of stainless steel 14 Langenback’s retractor Specification: Made of stainless steel 15 Lower molar Extraction forcep English pattern Specification: made of hard stainless steel with knurnled handle grip, disc /box type of hinge joint Set of one piece right & one piece lower molar forcep 16 Pediatric Extraction upper incisor & canine forcep Specification: made of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length 17 Pediatric Extraction upper molar forcep right & left Specification: made of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length 18 Penta Head microscope Specification: Total Magnification: Penta Head 1+4 , 40X – 1000X Viewing Head - Compensation free Trinocular Head inclined at 30° , 360° rotatable-IPD 48 -75mm Objective Lens: Infinite Plan Achromatic objectives 4X, 10X, 40X & 100X (oil) Eyepiece- 10X/22mm Nosepiece- Reversible Inward Quintuple Nosepiece Condenser- Swing out / dual type condenser, N.A.0.9/0.25 centre adjustable Focus- Co-axial coarse & fine focusing system 0.2 mm Stage- Double layer Mechanical Stage 185mm X 142mm, cross travel- 75mm X 55mm Illumination-LED pointer with brightness adjustment 24V/100W Warranty- 2 years 19 Slide storing cabinet Specification: Cabinet for 1050 slides consisting of 6 drawers each for 175 slides, arranged in single rowFramework made of 15mm plywood with top and sides covered with sunmica laminated sheet. 20 Slide warming table Specification: Top surface made of Stainless Steel (SS-304 grade) The surface temperature is controlled from ambient to 70°C Supplied complete with pilot lamp, cord and plug To work on 220/230 Volts A.C. Supply 21 Steel mallet Specification: for use in oral surgical work Made of stainless steel length 7.5”, head diameter 20-22mm 22 Steel slide racks for staining Specification: The 5-Slide Gripper can accommodate 5 microscope slides in one staining procedure.It fits most coplin and round-open staining jars It should be made of a special material which is resistant to all chemicals and solvents which are used in staining It withstands drying temperatures up to 80°C 23 Synthetic Nanocrystalline Beta Tricalcium Phosphate Bone Graft Specifications : 100/200/300/400/500microns particle size. Each unit packet contains 1cc Standard packaging/physical verification of sample may be made 24 Tissue capsules / Tissue embedding cassettes Specification: Made of acetyl polymer;Cassettes should keep specimen safely submerged in liquid, Efficient flow- through slots,Snap-latch and hinge-lock design prevent early separation of base and lid and allows for one hand operation. Large labeling area on two sides of cassette. Anterior writing area is at 35° angle. Pore size: 1mm square pores Outside dimensions: 28.5 x 41 x 6.7mm (1.12 x 1.61 x 0.26) Inside dimensions: 26 x 30 x 5mm (1.02 x 1.18 x 0.2) 25 Tissue floatation water bath Specification:(thermostatically controlled) Inner tank (Single piece) made of black anodized aluminum. Housing made of powder coated aluminum. Front panel consist of temperature regulator knob, mains switch and pilot lamp. Inside black and outer surface finished in powder paint, with wide enough rim for drying the wet slides. Bath size(inner)-225mm*70mm Temperature- controlled by capillary tube thermostat Temperature range- +5 degree c to 70 degree C 26 Upper premolar Extraction forcep English pattern Specification: made of hard stainless steel with knurnled handle grip, disc /box type of hinge joint 27 Important Note:1. All prospective bidders are requested to quote the rate in BOQ AS PER ACCOUNTING UNIT (AU) REPEAT AS PER ACCOUNTING UNIT (AU) & item specifications as mentioned in the Table-1. WRONG QUOTING OF THE RATE in BOQ will be dealt with as per penal provisions of the T&C of the Tender.2. Quality of the product supplied, may be ascertained by testing / physical examination by the experts at any stage of the tender period.3. The equipment should be US FDA/ CE/ BIS/ CDSCO approved (US FDA/ CE requirements will be applicable only when the Indian Standards like BIS/ CDSCO is not available).4. The prospective Bidders of the said Tender are requested to make a declaration in Affidavit under Annexure VI(b)in case of sole manufacturer/importer (i.e. proprietary in nature).5. If the Item(s) under sole manufacturer / importer is (are) Proprietary in nature, quarterly intimation is solicited from the approved Bidders positively regarding the status of their Item(s) Proprietary in nature, otherwise their Item(s) will be blocked in the SMIS.6. In case of Tie Bid, decision will be taken by the TIA as per G.O. No. 2320-F(Y), dated 07.06.2022 issued from Finance Department Audit Branch (Group T).