|
| 1 | Labour for Preparation of old surface plastered or unplastered Complete removal of existing treatment including scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots on surfaceof old wall surfaces. |
| 2 | Labour for Preparation of old surface plastered or unplastered Complete removal of existing treatment including scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots on surfaceof old Ceiling surfaces. |
| 3 | Labour for Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc |
| 4 | M & L for Rendering Cement Plaster 15mm thickin CM 1:4 on fair faces of brick work or concrete surfaces (Make for Cement :- UltraTech, ACC, Ambuja, J.K. Cement, Birla cement). |
| 5 | M & L for 3mm thick wall care putty on Wall. Quality shall be verified by EIC.(Make forPutty :- Birla white, JK white, Asian). |
| 6 | M & L for 3mm thick wall care putty on Ceiling. Quality shall be verified by EIC.(Make :- forPutty :- Birla white, JK white, Asian). |
| 7 | M & L for Surfaces of any description over 10cm girth or width, not otherwise described, applying two coats of 100 % Premium plastic emulsion on interior Walls and ceiling including one coat of interior wall primer over new/old surfaces. Application as per manufacturer specification. Colour and quality shall be verified by EIC.(Make :- for 100% Premium Plastic Emulsion and Primer :- Asian, Burger, Nerolac). |
| 8 | M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one and more coat of water/damp proof primer for exterior walls applied as per manufracture specification over old/new surfaces, Colour and quality shall beverified by EIC..(Make for Acrylic exterior emulsion and water/damp proof exterior primer:- Asian, Burger, Nerolac) |
| 9 | M & L for surfaces of any description over 10cm width or girth not otherwise described and painting withTwo coats of synthetic enamel paint (ordinary tint) on Painting brick, stone, concrete, Asbestos cement or plster surfaces. Colour and quality shall be verified by EIC. (Make for Paint /Primer:- Asian, Burger, Nerolac). |
| 10 | M & L for preparation of old painted wooden or wood based surfaces of any description not otherwise described over 10 cm width or grith and painting with one coat of synthetic enamel paint (ordinary tint) Colour and quality shall beverified by EIC..(Make for Paint/Primer:- Asian, Burger, Nerolac, indigo). |
| 11 | M & L for French polishing on wood surfaces of any description width or girth including cleaning and preparation thesurfaces including one or more coat on old work. Colour and quality shall beverified by EIC..(French Polishing:- Asian, Burger, Nerolac, indigo). |
| 12 | M & L for preparation of old painted steel or iron surfaces any description over 10cm width or girth not otherwise described and painted with one coat of synthetic enamel paint (ordinary tint) Colour and quality shall beverified by EIC..(Paint/Primer:- Asian, Burger, Nerolac, indigo). |
| 13 | M & L for preparation of old painted steel or iron surfaces (Truss structure) any description over 10cm width or girth not otherwise described and painted with one coat of aluminium paint Colour and quality shall beverified by EIC..(Make for Al-Paint/Primer:- Asian, Burger, Nerolac, indigo). |
| 14 | M & L for Preparation of old painted surface Small articles such as metal switch blocks, metal ceiling roses, articles of builder\"s hardware such as door springs, hooks, knobs, fasteners, stays, locks, latches, etc., straps to roof trusses, gates and similar arti-cles, when unconne-cted with other pain-ting or when painted in a different tintwith one coat in Aluminium paint. Colour and quality shall beverified by EIC..(Make for Al-Paint/Primer:- Asian, Burger, Nerolac, indigo). |
| 15 | Labour for Dismantling of wrought iron or mild steel work of any description not otherwise provided for |
| 16 | S & F of Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.(Make for Aluminium Section : NALCO, HINDALCO, MALCO, BALCO, INDAL, JINDAL ALUMINIUM) |
| 17 | S & F of Anodised aluminium window and ventilator shutters, side hung or Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. (Make for Aluminium Section : NALCO, HINDALCO, MALCO, BALCO, INDAL, JINDAL ALUMINIUM) |
| 18 | S & F of Sheet glass 4mm thickness, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane. |
| 19 | S & F of Framed work with Grills such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. |
| 20 | S & F of Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc.,Complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde- E- 250) quality- A. |
| 21 | S & F of Flush shutters, solid core construction, with block board core and 6mm plywood face panels, commercial type on both sides and two faces covered with decorative face veneer with lipping/frame to match, thickness is 30 mm. |
| 22 | S & F of Butt hinges heavy weight ,cold rolled mild steel and fixed size of hinges is 125 mm. |
| 23 | S & F of Mild steel pressed handles, oval type, stove enamelled black, Size of handle 150 mm. |
| 24 | S & F of Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt is 250mm. |
| 25 | S & F of Mild steel semi barrel tower bolt, riveted or spot welded type with back plates, with bright bolt and open staple, and fixed, length of bolt is 150 mm. |
| 26 | S & F of Mild steel semi barrel tower bolt, riveted or spot welded type with back plates, with bright bolt and open staple, and fixed, length of bolt is 300mm. |
| 27 | S & F of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor include for vulcanised rubber piece, Overall length of cover plate is 140 mm. |
