Tender For Construction Of Additional Class Room At Bharat Nodal Ups, Korada Of Korada Gp Under Nuagaon Block For The Year 2024-25.
Tender Value
9.91 Lakhs
Estimated cost
Bid Submission
02 Sep 2024
0 days left
EMD
9910
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nuagaon → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Additional Class Room At Bharat Nodal Ups, Korada Of Korada Gp Under Nuagaon Block For The Year 2024-25.
BOQ
| Sl. No. | Item Description |
| 1 | EW |
| 2 | Earth work in excavation of foundation in hardsoil including hard moorum, stoney earth mixed with boulders (except sheet rock and boulders requiring blasting) with all leads & lifts including dressing & leveling the bed & depositing the excavated earth at places away from work site with all leads & lifts including cess and cost of all labour T&P & dewatering if required for the work etc. complete and as per specification and direction of Engineer-In-Charge |
| 3 | Supplying and filling in foundation & plinth with sand in 23.5 cm (9\") thick layers including watering and ramming with cost, conveyance, royality taxes of all materials, and labour with T&P required for the work including cess etc complete. (Measurement will be taken on finished compacted section only) as per direction of Engineer-in-Charge. |
| 4 | Supplying and Filling F&P with excavated materialsincludingwatering & ramming as per the specification & direction of Engineer in charge. |
| 5 | Providing cement concrete of proportion (1:3:6) in foundation and floors using 4cm (3/2\") size clean hard black hand broken granite stone metal of approved quality and from approved quarry including hoisting lowering and laying concrete in layers not exceeding 15cm (6\") thick to the required level ramming, watering & Curing etc. complete including cost & conveyance of all materials with all taxes & royalties and all labour with T&P required for the work with cess etc, complete including dewatering if required as per direction of Engineer In Charge. |
| 6 | RCCwork of gradeM-20 having a minimum compressivestrength in work test of 200Kg/cm2 in15cm cubesat 28daysafter mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where necessary including cost, conveyance, taxes and royalties of all materials and labour required for the worketc, complete with all T&P and cessin all respect but execludingcost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge.(a) Column Base & Pedestal |
| 7 | Column upto Plinth |
| 8 | Plinth Beam |
| 9 | Column |
| 10 | Lintel band |
| 11 | Chajja |
| 12 | Roof Beam |
| 13 | RoofSlab |
| 14 | Straightening bent up or coiled rods cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires ( SAIL/TATA/VIZAG STEEL)and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyance & taxes of M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour with all T&Prequired for the work with cess etc,complete in all floors (weight of binding wire wastage, lapping if any will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) etc. in all respects as per the direction of Engineer-in-Charge.(No extra payment towards lapping will be made by the Department) |
| 15 | Fly ash brick masonary in Cement Mortar (1:6) in foundation & Plinth using Fly ash brick of 25 cm X 12 cm X 8 cm size having a crushing strength not less than 75kg per Sq.cm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering & curbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all taxes & royalties with all T&P & cess etc, complete in all respect as per the direction of Engineer-in-charge. |
| 16 | Fly ash brick masonary in Cement Mortar (1:6) in Superstructure using Fly ash brick of 25 cm X 12 cm X 8 cm size having a crushing strength not less than 75kg per Sq.cm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering & curbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all taxes & royalties with all T&P & cess etc, complete in all respect as per the direction of Engineer-in-charge. |
| 17 | 20mm (3/4\") thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiseling the same and cleaning surface by wire brushing laid to proper slope finsihed smooth to receive tarfelt tratment watering and curing including cost and conveyance of all materials and labour with T&P and cessrequired for the work with all taxes and royalties etc, complete in all respect in all floors as per direction of Engineer-in-charge. |
| 18 | 16mm (5/8\") thick cement plaster in C.M. (1:6)finished smooth to inside surface of 10\" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all taxes, royalties & cess etc, complete in all floor as per direction of Engineer-in-charge. |
| 19 | 12mm (1/2\") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur with T&P required for the work with all taxes, royalties & cess etc, complete in all floors as per direction of Engineer-in-charge. |
| 20 | 6mm thick cement plaster in cement mortar (1:4) to ceilling of roof lintel and chajjas after chipping and chiselling the same and clearing the surface by wire brush finished smooth watering and curing for 7 days including cost,conveyance of all materials and labour with T&P & Cess required for the work with taxes and royality etc complete in all respects in all floors as per direction of Engineer-in-Charge. |
| 21 | Supplying of fabricated doors and windows with angle iron frames & grills of approved desigin fabricated 2 Nos aldrop 2 nos bought out as per ISS Tower Bolt 2 nos bought out as per ISS including cost conveyance & taxes of all materiasl& labour with T&P & Cess in all respectas per direction of Engineer In Charge. |
| 22 | Painting two coats with any approved paint over a coat of priming to Iron work including cost of the primer and paint sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P required for the work with cess etc, complete as per the direction of the Engineer-In-Charge. |
| 23 | Supplying,fitting & fixing vetrified tile in floors of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm & filling joints with epoxy grout of approved quality including cost of all materials labour and T&P and cessetc, required for the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 24 | Supplying,fitting & fixing Vetrifed Industrial Tile in Dadosof premium grade having thickness of 8 mm to 10 mm confirming IS 4457 of size 300 mm X 300 mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm & filling joints with epoxy grout of approved quality including cost of all materials labour and T&P and cessetc, required for the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 25 | Supplying,fitting & fixing anti skid CeramicTileon25mm thick bed of CM(1:1) of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm & filling joints with epoxy grout of approved quality including cost of all materials labour and T&P and cessetc, required for the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 26 | Wall Priming one coat with any approved primer on new plastered surface of with any approved primer including cost of primer and paint sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P required for the work with cess etc, complete as per the direction of the Engineer-In-Charge. |
| 27 | Wall painting two coats with plastic Emulsion paint of approved quality & shade on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge. |
| 28 | Finishing wall surface two coats 2.50 Kg with approved quality of weather coat (ISI) over a coat of oil bound wall cement primer (ISI)@ 0.84 ltr per 10 Sqm of plastered surface after celaning the surface including cost of paint, cost conveyance and taxes of all materials and labour with T&P and Cessrequired for the work etc, complete in all respect as per the direction of Engineer-in-Charge. |
| 29 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing in all floors using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance of all materials labour, T&P etc complete as per the direction of Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
Aug 20, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 03, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender