Construction Of Internal C.C. Road At. Para, Tq- Washi, Dist- Dharashiv.
Tender Value
8.34 Lakhs
Estimated cost
Bid Submission
27 Aug 2024
0 days left
EMD
8349
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
washi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Internal C.C. Road At. Para, Tq- Washi, Dist- Dharashiv.
BOQ
| Sl. No. | Item Description |
| 1 | Item No- 01:- Supplying trap/ granite/ quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary thedate of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken). |
| 2 | Item No- 02:- Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 3 | Item No- 03:- Spreading 80/40 mm metal for road work including sectionong etccomplete as directed by Engineer in charge . |
| 4 | Item No- 04:- Spreading hard murum/ soft murrum/ gravel or kankar for sidewidth complete |
| 5 | Item No- 05:- Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. |
| 6 | Item No- 06:- Compacting the sub grade / gravel / size metal (100 mm loose) layersfor all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. |
| 7 | Item No- 07:- Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI gradefinely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete. |
| 8 | Item No- 08:- Providing and laying in situ/ ready mix M20 CC of trap/ granite/quartzite/ gneiss metal for wearingcourse 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) |
| 9 | Item No- 09:- Providing and laying cement concrete pipe of IS 458:2003 NP-2 classof 450mm diameter in proper line, level and slope including providingand fixing collars in cement mortar 1:2 and curing etc. complete. |
| 10 | Item No- 10:- Providing and laying Cast in situ/Ready Mix cement concrete M-20of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 11 | Item No- 11:- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis,copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 12 | Item No- 12:- Providing and fixing Road junction / Information sign board of size0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white background and back side gray stove enamelled, bonded with red retroreflective sheet Engineering grade, border / letters / numeral / arrows,coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directedby Engineer-in-charge etc. complete.Mild Steel Board with Engineering Grade. |
| 13 | Total in Figures |
| 14 | Item No- 13:- Charges for Testing |
| 15 | Item No- 14:- Charges for Testing |
| 16 | Total in Figures |
AI Tender Summary
Tender Timeline
Aug 19, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 28, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender