Tender For Patch Repair Work Pwd Sub Division Sarmathura Baseri
Tender Value
40 Lakhs
Estimated cost
Bid Submission
29 Aug 2024
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sarmathura → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Patch Repair Work Pwd Sub Division Sarmathura Baseri
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubing road land including uprooting rank vegetation grass bush shrubs saplings and tree of girth upto 300ml removel of stumps diposel of unservicble material and stacking of serviceble material upto 1000mfrom road boundry as per by mechanical means in area of light jungle |
| 2 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead as per Technical Specification Clause 301.5 With lead 50 mtr to - 500mtr |
| 3 | Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured).Grading as per MoRTH specification : Table 400-1,400-2 with CBR value not less than 20 To achieve 100% Proctor density |
| 4 | Providing, laying, spreadingand compactingstone aggregate of specific size as per table400-6 &400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Stone screeningto fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthenbund toprotect edegs,lighting, guarding,barricading and maintenance of diversion etc. [MoRTH specification:Clause 404] (bymanualmeans) with all leads (compacted thickness as specified to be measured)Grading no.3 (53-22.4 mm) crusher broken |
| 5 | Striping excess soil from the shoulder surface including disposal of excess earth side slopes to achieve the approved level and compacting with plate compactor upto 75mm average depth complete as per MoRTH specification clause 3003 |
| 6 | Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels and slopes complete as per MoRTH specification clause 3002 |
| 7 | Providingandlaying WBM Patching usingcrusher broken aggregate including preparationofpot hole, scarifying and re-shapingtotherequired grade and camber, asper the standard specifications, spreading of material, consolidation with mechanical drop hammer of 11.40kg hand rammer or 8-10tonne power roller, spreading & consolidation of binding material including cost of fuel and lubricants and hire charges of T & P. |
| 8 | Providingandlaying20 mmthickpremix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binderand aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including costof bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery,T&P etc. |
| 9 | Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material. |
| 10 | White/colour washing of parapets, kerbs, railing,boundry stone, guide stone, poles, trees guard etc. complete-New surface three coats |
| 11 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered or concrete surface as per MoRTH specification clause 803 |
| 12 | Painting lines, dashes, arrows etc. on road in two coats on old work with ready mixed road marking paint conforming to IS : 164 on bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per MoRTH specification clause 803-Upto 10 cm width (white & yellow) |
| 13 | White/cololur wash of trees, electric & telephone pole,guard stone etc.up to ht.of 1.5 mtr. from the ground level comprising of 0.45m.white, 0.30m. red band in middle and again 0.45m. white around the periphery complete two or more coats including trimming the bushes on the stem & the root.-Trees dia upto 600 mm, pole etc. |
| 14 | P&F delinator with 30 cms diaRCC hume pipe ( IS-Marked) pipe 1.00M long 40 cms embedded in earththe inside of pipe shall be filled with cement concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 coarse aggregate 20 mm nominal size ) with semi circular hump at top the pipes shall be painted 15 cms wide alternate strips with black/ white with enamel paint (Black strip at top) with red round reflector 7.5 cms dia at top on side facing the traffic and opposite side (as per IRC -79 ) |
| 15 | Supplyofinformatory reflective sign boards made out of 2 mm thick M.S. sheet, stove enamelledpaintasperIRC - 67(latest revision) fixed on angle iron of size 65 x 65 x 6 mm of 3 m long.-600 x 800 mm with size of square 400 mm |
| 16 | Supply of cautionary/warning refelective sign boards made out of 2mm thick M.S. sheet as per IRC - 67 (latest revision), stove enamelled and refelective symbol fixed on angle iron of size 65 x 65 x 6 mm of 3 m long.-900 mm equilateral triangle |
| 17 | Painting of direction and place identifications of semi reflective sign boards as per IRC:67 M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour.as per approved drawing and Technical Specification Clause 1701 |
| 18 | Supply of mandatory/regulatory reflective sign boards fixed on 3m long angle iron of size 65 x 65 x6 mm complete as per IRC - 67 (latest revesion) made of 2 mm thick MS sheet with stove enamelled paint and reflective symbol.-Stop sign 900mm octagon |
AI Tender Summary
Tender Timeline
Aug 17, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 30, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender