Tender For Supplying, Fitting And Fixing Crash Barrier At Different Places Of E.M. Bypass.
Tender Value
9.87 Lakhs
Estimated cost
Bid Submission
29 Aug 2024
0 days left
EMD
19800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supplying, Fitting And Fixing Crash Barrier At Different Places Of E.M. Bypass.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in cutting to form road section in correct profile including removal of spoil not exceeding initial lead of 50m and initial lift of 1.5m (Mode of measurement: pre works and post works |
| 2 | Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier]. In Ground Floor and Foundation(i) Without approved concrete pump ( Ref :PWD (Bldg.)-2017, It. No. 18, Page No.32 & 3rd Corrigenda Addenda dtd-04.06.2018, p-15 & 16, PWD(R&B) 2018, Chapter-1, pg-227 I-1.03, pg-230,Table-I , Table III-2 pg-226, ) |
| 3 | METAL BEAM CRASH BARRIER,(A) TYPE - A, \"W\" : METAL BEAM CRASH BARRIERPROVIDING AND ERECTING A \"W\" METAL BEAM CRASH BARRIER COMPRISING OF 3 MM THICK CORRUGATED SHEET METAL BEAM RAIL, 70 CM ABOVE ROAD/GROUND LEVEL, FIXED ON ISMC SERIES CHANNEL VERTICAL POST, 150 X 75 X 5 MM SPACED 2 M CENTRE TO CENTRE, 1.8 M HIGH, 1.1 M BELOW GROUND/ROAD LEVEL, ALL STEEL PARTS AND FITMENTS TO BE GALVANIZED BY HOT DIP PROCESS, ALL FITTINGS TO CONFORM TO IS:1367 ANDIS:1364, METAL BEAM RAIL TO BE FIXED ON THE VERTICAL POST WITH A SPACER OF CHANNEL SECTION 150 X 75 X 5 MM, 330 MM LONG COMPLETE AS PER CLAUSE 811.3 OF SPECIFICATIONS FOR ROAD & BRIDGE WORKS OF MORT&H (5TH REVISION).. |
| 4 | Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.(b) Where staging is not required. ( Ref :PWD (Rds & Brdgs)-2018, Page No. 332, It. No. 18.05) |
| 5 | REINFORCEMENT FOR REINFORCED CONCRETE WORK IN ALL SORTS OF STRUCTURES INCLUDING DISTRIBUTION BARS, STIRRUPS, BINDERS ETC INITIAL STRAIGHTENING AND REMOVAL OF LOOSE RUST (IF NECESSARY), CUTTING TO REQUISITE LENGTH, HOOKING AND BENDING TO CORRECT SHAPE, PLACING IN PROPER POSITION AND BINDING WITH 16 GAUGE BLACK ANNEALED WIRE AT EVERY INTERSECTION, COMPLETE AS PER DRAWING AND DIRECTION. |
| 6 | Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation.(a) 1:3:6 proportion ( Ref :PWD (Bldg.)-2017, It. No. 1, Page No.23 & 3rd Corrigenda Addenda dtd-04.06.18, P-9 & 10) |
| 7 | Supplying and Laying in the specified pattern of Interlocking Concrete Block Pavements (ICBP) with concrete blocks (with Concrete grade as specified as per Table 1 of IS 15658 : 2006) manufactured from BIS licensee manufacturer, with spacer nib (Small protruding profiles on the vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per Cl. No 3.26 of IS: 15658)and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block, as per CL.No.3.3 of IS: 15658) as per Table 2 of IS :15658 with flexural strength/breaking load as per Annexure G of IS:15658.on the prepared base course of specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per clanse 6.5.1 of IRC SP 63) and filling up the gaps in between paver blocks with joint filling sand (the grading of the joint filling sand will he us per clause 6.5.2 of IRC SP 63) and completing the edges with cut blocks as per Cl. No. 8.7 af IRC SP-63(2018) with proper confinement of bedding and joint filling sand, compaction levelling and filling up of the edge gap. 50mm thick (ii) Coloured Decorative(12th Corrigenda & addenda dated14.10.2020) |
| 8 | Sub Total |
| 9 | GST 18% |
| 10 | CESS 1% |
AI Tender Summary
Tender Timeline
Aug 16, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 31, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
Completed