Tender For For Increasing The Height Of Aluminum Scrap And Increasing The Height Of Roof And Wall Maintenance At T/Fs Repair Workshop, Talkatora, Lucknow
Tender Value
14.76 Lakhs
Estimated cost
Bid Submission
22 Aug 2024
0 days left
EMD
14750
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
For Increasing The Height Of Aluminum Scrap And Increasing The Height Of Roof And Wall Maintenance At T/Fs Repair Workshop, Talkatora, Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. |
| 2 | Concrete with 4cm gauge I class brick ballast (class 150) , coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. |
| 3 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work |
| 4 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. |
| 5 | First class brick work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. |
| 6 | First class brick work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in Super structure including necessary cutting and moulding of bricks as required and also including honeycomb brick work, thickness of wall not to be less than one brick including supply of all materials, labour & T&P etc. required for proper completion of work. |
| 7 | Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. |
| 8 | TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 10 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. |
| 11 | Add for extra labour and materials for plaster over rough face of one brick thick wall. |
| 12 | Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint \"Luxol\" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. |
| 13 | As in item 13.01 above but for every coat after first coat |
| 14 | Finishing walls with water proof cement paint of approved made like \"Super Snowcem\" or equivalent quality on new work with two coats to give an even shade including supply of all materials, labour etc. required for proper completion of work. |
| 15 | Every coat each coat of water proof cement paint after the first two coats to give an even shade includingsupply of all materials,labour and T&P etc. required for propercompletion of the work. |
AI Tender Summary
Tender Timeline
Aug 16, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 23, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
Completed