|
| 1 | PART A - CIVIL WORK |
| 2 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (PWD-DSR 2023-24, ITEM NO.7-1-29) |
| 3 | Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.(PWD-DSR 2023-24, ITEM NO.9-2-3) |
| 4 | Supplying & erecting three phase, 415V, street light control panel up to the max load of 12kW, TPN MCB 63A, powder coated CRCA 14 SWG sheet,outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs.astronomical time switch with minimum 5 years battery back up,auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation. (PWD-DSR 2023-24, ITEM NO.5-2-6) |
| 5 | Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast).(PWD-DSR 2022-23, ITEM NO.16-3-12) |
| 6 | Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(PWD-DSR 2023-24, ITEM NO.9-1-1) |
| 7 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.(PWD-DSR 2023-24, ITEM NO.7-6-12) |
| 8 | Supplying and erecting 6 to 32 A SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected.(PWD-DSR 2023-24, ITEM NO.1-6-44) |
| 9 | Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OHPL/HM (excluding luminaries)(PWD-DSR 2023-24, ITEM NO.8-2-1) |
| 10 | Supplying and erecting Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete .(PWD-DSR 2022-23, ITEM NO.8-2-22) |
| 11 | Supplying and erecting static energy meter with 3 X 240V 50 Hz. AC supply 10 to 60 A, ISI mark, accuracy class 1.0 with backlit LCD display, (measuring and display kWh only) with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company.(PWD-DSR 2022-23, ITEM NO.6-3-3) |
| 12 | Supplying & erecting wire rope of 3/4/6mm dia. having 6/19 construction as per IS complete with termination in provided eye bolts including dismantling of existing accessories as applicable.(PWD-DSR 2021-22, ITEM NO.17-2-29) |
| 13 | Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. (PWD-DSR 2023-24, ITEM NO.2-3-18) |
| 14 | Part B |
| 15 | TESTING CHARGES+ROYALTY |
| 16 | CONTINGENCY CHARGES 5% |
| 17 | ADD 18% G.S.T. (S.G.S.T. 6% + C.G.S.T. 6%) |
| 18 | ADD (0.5 % Insurance) |
