Tender For Height Increase Of 18Inch Of 02No.50Mt Capacity W.B. And Upgradation And Capacity Enhancement Of Wb 50 To 60 Ton Dismantling Of Existing 02 No. 50 Ton W.B.Ands/I/T/C Of Replaced W.B. Members Including Girder,Plate Etc, Repair Of Old Components
Tender Value
11.31 Lakhs
Estimated cost
Bid Submission
04 Sep 2024
0 days left
EMD
1.14 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sandila → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Height Increase Of 18Inch Of 02No.50Mt Capacity W.B. And upgradation And Capacity Enhancement Of Wb 50 To 60 ton Dismantling Of Existing 02 no. 50 Ton W.B.Ands/I/T/C Of Replaced W.B. Members Including Girder,Plate Etc, Repair Of Old Components At N
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling RCC work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material with in distance of50 m leadas directed by Engineer in charge.(DAR NO 15.3) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level : 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 4 graded stone aggregate 20mm nominal size).(DAR 4.1.2) |
| 3 | Mild steel or iron in plain work such as reinforced cement concrete or reinforced brick work (when not included in an overall rates), wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bends, hooks and authorized overlapping shall be measured upto floor two level. (SI NO 504-Hardoi) |
| 4 | Mild steel or iron work in small size and section such as holding down bolt, hold fast tie rods, etc. wrought to required form including drilling holes, riveting or welding where necessary and their fixing required for proper completion of the work. (S.I.No. 502-Hardoi) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves,chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size.(DAR 5.3) |
| 6 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.(10.19) |
| 7 | Dismentling of steel work in single sectionincluding dismembering and stacking of dismantled materials as directed by Engineer in charge with in distance of50 m lead In:Channels,angles,tees and Flats.(DAR NO 15.17.2) HardoiISMB 250 X 125 mm \"I\" shape Girder |
| 8 | Ms or iron work in heavy sizes such as trusses,built up gates,door frames,record racks roof work,gates etc wroght to required formincluding drilling holes rivetting or welding where necessary and also including supply bolts, nuts etc. and there fixing required for proper completion of work .(SI No 503) HardoiISMB 300 X 140 mm \"I\" shape Girder |
| 9 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. DAR No. -10.19 |
| 10 | Dismantling old plaster or skirting raking out surface for plaster including disposal of rubbish to joints and cleaning the the dumping ground within 50 metres lead. (DAR 15.56) |
| 11 | 12mm thick cement plaster 1:4 cement and coarse sand( FM 1.25) mortar over brickwork including supply of all materials, labour and T&P et. required for proper completion of work. (DAR. 13.4.1) |
| 12 | Wall painting with Plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work (For Internal wall ).(DAR 13.60.1) Hardoi |
| 13 | Finishing walls with two or more coat of acrolic smooth exterier paint of required shade including primer coat of exterier primer to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material including curing and supply of all materials, labour and T&P etc.required for proper completion of the work. (DSR 13.46.1) Hardoi |
| 14 | Providing and fixing of 1 mm. thick MS Sheet doors with frame of 40x40x6 mm angle iron and 3 mm MS gusset plates at the junction and corner all necessary fittings including applying a priming coat of approved steel primer using flate 30x6 mm for diagonal braces and central cross piece. (SI. No. 10.5.2) |
| 15 | Supply and fixing of panes of glass with Atul or equivalent I.S.I. marked quality putty brands and spring complete.thickness 4.0 mm. thick.(DAR 14.5.1) |
| 16 | Painting two coats over priming coat on new steel or wood surface including priming coat with superior syntheic enamel such as Berger, Asian, Neroluc LUXOL 3,Hi-gloss apcolite superlac, DULUX specified burshing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of all materials labour tools and plants etc. required for proper completion of the work. (S.I. No.641+642) Hardoi |
| 17 | 40 mm thick cement concrete flooring 1:2:4(1cement : 2 coarse sand: 4 graded stone aggregate of size 12.5 mm and below) finished with floating coat of neat cement with out base concreteincluding fixing of glass strips. (Excluding cost of glass strips) (DAR. 11.3.1) |
| 18 | S/F of i5 Computer desktop HP make/equivalent |
| 19 | S/I of Printer TVS make DOT Matrics80 Coloumn |
| 20 | S/F of Digitizer suitable for 60 MT Computerised weigh bridge |
| 21 | Deduct for Scrap formed after dismentling of old existing girder & plates |
AI Tender Summary
Tender Timeline
Aug 14, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 05, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender